FIMD device is not used at all on Exynos5422-based Odroid XU3-lite and XU4. XU3 board teorethically can support FIMD with DisplayPort connector, but due to hw limitation/design it doesn't work in most cases. It is also not even enabled in XU3 dts file.
FIMD node was enabled mainly due to limitation of early Exynos DRM driver, which didn't initialize properly when no FIMD device was available. This node can be now safetly removed from XU3-common dtsi and added layer to Odroid XU3 dts, when Display Port driver gets enabled. Signed-off-by: Marek Szyprowski <[email protected]> --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1af5bdc..9134217 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -67,11 +67,6 @@ <19200000>; }; -&fimd { - status = "okay"; -}; - - &hdmi { status = "okay"; hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
