This is a known problem in 2.4 - I have a variety of patches from
different people to correct this, and I am going to take a look this weekend
and figure out what makes the most sense.
-Eric
----- Original Message -----
From: "conway, heather" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, January 26, 2001 8:35 AM
Subject: scanning past LUN 7 with v2.4.0
> Hi Folks,
> I'm working with a host running v2.4.0 attached to a storage box with 1
> target and multiple LUNs. The host has been allocated 96 devices to one
> QLA2200F HBA, but it can only see the first 8 devices (target 0 LUN 0
> through LUN 7). Is there a way enable the host to scan past target 0 LUN
7?
>
> The host has Probe All LUNs enabled and the maximum number of SCSI disk to
> be loaded as modules was increased from 40 to 128 in menuconfig.
> I know that the fix in v2.2.x was to increase max_scsi_luns in either
scsi.c
> or lilo.conf. Is there a similar way to increase the limit in v2.4.x?
> Thanks for your help.
> Heather
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
