Hi ,
when i am trying to load the qlogicfc driver
(lk-2.4.0) I get the following message-
Link is up....
> init_module: No
> > such device
> > Hint: insmod errors can be caused by incorrect
> module parameters, including
> > invalid IO or IRQ parameters
I have one FC disk connected to the FC adapter ....
Can anybody let me the solution to the problem.
Its connected in P2P.
Thanx in advance
--- Robert Read <[EMAIL PROTECTED]> wrote:
> Well, this doesn't help you much, but it's working
> here, and I also
> have the adaptec driver loaded.
>
> On Wed, Mar 07, 2001 at 12:32:27PM +0100,
> [EMAIL PROTECTED] wrote:
> >
> >
> > Hi,
> >
> > is there somebody looking after the qlogicfc
> driver?
> > It seems to be broken in kernel version 2.4.2 and
> > later (2.4.3-pre2).
> >
> > When I try to load it, I get the following
> messages:
> >
>
/lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o:
> init_module: No
> > such device
> > Hint: insmod errors can be caused by incorrect
> module parameters, including
> > invalid IO or IRQ parameters
> >
>
/lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o:
> insmod
> >
>
/lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o
> failed
> >
>
/lib/modules/2.4.3-pre2/kernel/drivers/scsi/qlogicfc.o:
> insmod qlogicfc
> > failed
> >
> > It worked fine in kernel version 2.4.1 and
> earlier.
> >
> > Thanks in advance ...
> >
> > Alexander Warmuth
> > IBM Storage Solutions Group
> > Advanced Technical Support Storage Area Networks
> > Mainz, Germany
> >
> >
> > -
> > To unsubscribe from this list: send the line
> "unsubscribe linux-scsi" in
> > the body of a message to [EMAIL PROTECTED]
> -
> To unsubscribe from this list: send the line
> "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
