Hello! Thanks for your response!
well, i installed SLES 8 and the system found its PERC 2/dc as an i2o block device. it loads all i2o_core, i2o_block, i2o_config, and i2o_pci and at i2o_pci it says to wait for more devices in the background.... but it does get an timeout back. so i believe the i2o module is not that correct one. i used to try the following modules: (rpm packages) megaraid-megamgr-1.07-5 megaraid2-2.10.1-3dkms can you guide me through updating to actual megaraid version? well, i believe that this is what i have to try next. cause, there is no kernel update for SLES 8 available :-( thanks, andrew Am Mittwoch, 23. Februar 2005 16:57 schrieb Ju, Seokmann: > On Wednesday, February 23, 2005 9:47 AM, Mrvka wrote: > > Please let me know what version of driver you are using. > Also, Is O/S installed on the device connected to megaraid controller? > > Thanks, > > > -----Original Message----- > > From: Mrvka Andreas [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, February 23, 2005 9:47 AM > > To: [email protected] > > Subject: installing new MegaRaid driver on Suse Enterprise Server 8 > > > > hi list, > > > > does anybody can help to guide me through an update > > of an megaraid driver? > > > > i have a Dell Perc 2/dc controller in my Dell 2450 Server and > > SuSE Server 8. > > > > if i use the standard megaraid driver, then the server crashes > > and stands... (no error log entry) > > > > i found many sites for updates but no instruction for that. > > > > can anybody please support me? > > > > thanks in advance! > > > > cheers > > Andrew > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > > the body of a message to [EMAIL PROTECTED] > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
