For that you'll need to edit /etc/modules.conf and change the megaraid2 entry to megaraid_mbox. Also, make sure you have the latest version of mkinitrd (to recognize the .ko module extension).
Good luck, Dennis -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, April 22, 2005 3:08 PM To: Ju, Seokmann; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [email protected]; Jonas Kaufmann; Thomas Glas; Sebastian Kamp Subject: Re: Raid1 on Dell Poweredge with Perc4e/Di Raid Controller runnin gDebian Sarge (3.1) Hello Ju, thanks for your help. I am a total newbie but I managed to compile a new kernel with your patch: /boot/vmlinuz-2.6.8-1 Then I did: server:/boot # mkinitrd -o /boot/initrd.img-2.6.8-1 2.6.8-1 Fatal: Module megaraid2 not found. Warning: This failure MAY indicate that your kernel will not boot! but it can also be triggered by needed modules being compiled into the kernel. Does this mean, that you patch is not working or did I make a mistake? Best regards, Oliver On Friday 22 April 2005 15:30, you wrote: > On Thursday, April 21, 2005 4:31 AM, Oliver wrote, > > > Is there a megaraid driver for the 2.6.8 kernel? If so, where? > > Try attached. It has driver source with one patch file (2.6.8-24.patch). > Please make sure to apply the patch before compile. > > Thank you. > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > Sent: Thursday, April 21, 2005 4:31 AM > > To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; > > [email protected] > > Cc: Thomas Glas > > Subject: Raid1 on Dell Poweredge with Perc4e/Di Raid > > Controller running Debian Sarge (3.1) > > > > Hello, > > I would like to use Raid1 on the Dell Poweredge with > > Perc4e/Di Raid Controller > > and two 2 73 GB drives running Debian Sarge (3.1). > > > > At http://linux.dell.com/storage.shtml I read that the > > Powerege 2850 Perc4e/Di > > requires megaraid2 driver 2.00.3 or higher on 2.4.x kernel. > > On 2.6.x kernels > > (x < 9) there is no driver for these adapters. On 2.6.x (x >= > > 9) use the > > 'megaraid_mbox' and 'megaraid_mm' drivers. > > > > Problem: The Debian Installers offers only to install: > > > > - 2.4.x (which seems to be okay for the raid) OR > > - 2.6.8 (which would not allow the use of the Raid) > > > > Solution: > > Is there a megaraid driver for the 2.6.8 kernel? If so, where? > > > > If not, should I use 2.4.x kernel or try to install a 2.6.9 > > kernel on Debian > > Sarge? > > > > -- > > Oliver K�nig > > > > Windfinder.com > > Knorrstr. 24 Hinterhaus > > 24106 Kiel > > Germany > > phone +49 431-8008643 > > VoIP +49 1801-7775558229 > > fax +49 431-8008644 > > Mobile +49 177-4933362 > > [EMAIL PROTECTED] > > www.windfinder.com > > - > > To unsubscribe from this list: send the line "unsubscribe > > linux-scsi" in > > the body of a message to [EMAIL PROTECTED] > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Oliver K�nig Windfinder.com Knorrstr. 24 Hinterhaus 24106 Kiel Germany phone +49 431-8008643 VoIP +49 1801-7775558229 fax +49 431-8008644 Mobile +49 177-4933362 [EMAIL PROTECTED] www.windfinder.com _______________________________________________ Linux-PowerEdge mailing list [EMAIL PROTECTED] http://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
