Correct maximum supported lun and target-id definitions.
The driver uses command-IOCBs which support a maximum lun
value of 0xffff -- correct #define to reflect the change.
Also, remove superfluous MAX_TARGET definition.
Signed-off-by: Andrew Vasquez <[EMAIL PROTECTED]>
---
drivers/scsi/qla2xxx/qla_def.h | 3 +--
drivers/scsi/qla2xxx/qla_init.c | 3 ++-
2 files changed, 3 insertions(+), 3 deletions(-)
900dd480ecb76a28cf910f53d1757264b6911c0b
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -181,7 +181,7 @@
*/
#define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */
#define MAX_FIBRE_DEVICES 512
-#define MAX_FIBRE_LUNS 256
+#define MAX_FIBRE_LUNS 0xFFFF
#define MAX_RSCN_COUNT 32
#define MAX_HOST_COUNT 16
@@ -191,7 +191,6 @@
#define MAX_BUSES 1 /* We only have one bus today */
#define MAX_TARGETS_2100 MAX_FIBRE_DEVICES
#define MAX_TARGETS_2200 MAX_FIBRE_DEVICES
-#define MAX_TARGETS MAX_FIBRE_DEVICES
#define MIN_LUNS 8
#define MAX_LUNS MAX_FIBRE_LUNS
#define MAX_CMDS_PER_LUN 255
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2094,7 +2094,8 @@ qla2x00_reg_remote_port(scsi_qla_host_t
qla_printk(KERN_WARNING, ha,
"Unable to allocate fc remote port!\n");
- if (rport->scsi_target_id != -1 && rport->scsi_target_id < MAX_TARGETS)
+ if (rport->scsi_target_id != -1 &&
+ rport->scsi_target_id < ha->host->max_id)
fcport->os_target_id = rport->scsi_target_id;
rport->dd_data = fcport;
--
Andrew Vasquez
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
