Please apply
Signed-off-by: Eric Moore <[EMAIL PROTECTED]>
>
> Assorted endianess fixes. I'll work on full endianess annotations
> later.
>
>
> Index: scsi-misc-2.6/drivers/message/fusion/mptbase.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/message/fusion/mptbase.c
> 2005-08-17 19:47:15.000000000 +0200
> +++ scsi-misc-2.6/drivers/message/fusion/mptbase.c
> 2005-08-17 19:48:53.000000000 +0200
> @@ -2171,7 +2171,7 @@
> facts->IOCExceptions =
> le16_to_cpu(facts->IOCExceptions);
> facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
> facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
> - status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
> + status = le16_to_cpu(facts->IOCStatus) &
> MPI_IOCSTATUS_MASK;
> /* CHECKME! IOCStatus, IOCLogInfo */
>
> facts->ReplyQueueDepth =
> le16_to_cpu(facts->ReplyQueueDepth);
> @@ -4800,8 +4800,8 @@
> pReq->Reserved3 = 0;
> pReq->NumAddressBytes = 0x01;
> pReq->Reserved4 = 0;
> - pReq->DataLength = 0x04;
> - pdev = (struct pci_dev *) ioc->pcidev;
> + pReq->DataLength = cpu_to_le16(0x04);
> + pdev = ioc->pcidev;
> if (pdev->devfn & 1)
> pReq->DeviceAddr = 0xB2;
> else
> Index: scsi-misc-2.6/drivers/message/fusion/mptctl.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/message/fusion/mptctl.c
> 2005-08-17 19:46:11.000000000 +0200
> +++ scsi-misc-2.6/drivers/message/fusion/mptctl.c
> 2005-08-17 19:47:37.000000000 +0200
> @@ -242,7 +242,7 @@
> /* Set the command status to GOOD if IOC Status is GOOD
> * OR if SCSI I/O cmd and data underrun or
> recovered error.
> */
> - iocStatus = reply->u.reply.IOCStatus &
> MPI_IOCSTATUS_MASK;
> + iocStatus =
> le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
> if (iocStatus == MPI_IOCSTATUS_SUCCESS)
> ioc->ioctl->status |=
> MPT_IOCTL_STATUS_COMMAND_GOOD;
>
> Index: scsi-misc-2.6/drivers/message/fusion/mptscsih.c
> ===================================================================
> --- scsi-misc-2.6.orig/drivers/message/fusion/mptscsih.c
> 2005-08-17 19:46:46.000000000 +0200
> +++ scsi-misc-2.6/drivers/message/fusion/mptscsih.c
> 2005-08-17 19:47:37.000000000 +0200
> @@ -3453,7 +3453,7 @@
> * some type of error occurred.
> */
> MpiRaidActionReply_t *pr =
> (MpiRaidActionReply_t *)mr;
> - if (pr->ActionStatus ==
> MPI_RAID_ACTION_ASTATUS_SUCCESS)
> + if
> (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
> completionCode =
> MPT_SCANDV_GOOD;
> else
> completionCode =
> MPT_SCANDV_SOME_ERROR;
> @@ -4002,9 +4002,9 @@
> dnegoprintk(("syncronize cache: id=%d
> width=0 factor=MPT_ASYNC "
> "offset=0 negoFlags=%x
> request=%x config=%x\n",
> id, flags, requested, configuration));
> - pcfg1Data->RequestedParameters =
> le32_to_cpu(requested);
> + pcfg1Data->RequestedParameters =
> cpu_to_le32(requested);
> pcfg1Data->Reserved = 0;
> - pcfg1Data->Configuration =
> le32_to_cpu(configuration);
> + pcfg1Data->Configuration =
> cpu_to_le32(configuration);
> cfg.pageAddr = (bus<<8) | id;
> mpt_config(hd->ioc, &cfg);
> }
> @@ -5254,7 +5254,7 @@
> /* Update tmax values with those from Device Page 0.*/
> pPage0 = (SCSIDevicePage0_t *) pPage;
> if (pPage0) {
> - val = cpu_to_le32(pPage0->NegotiatedParameters);
> + val = le32_to_cpu(pPage0->NegotiatedParameters);
> dv->max.width = val &
> MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
> dv->max.offset =
> (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
> dv->max.factor =
> (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
> @@ -5282,12 +5282,12 @@
> dv->now.offset, &val,
> &configuration, dv->now.flags);
> dnegoprintk(("Setting Max: id=%d
> width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
> id, dv->now.width,
> dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
> - pPage1->RequestedParameters = le32_to_cpu(val);
> + pPage1->RequestedParameters = cpu_to_le32(val);
> pPage1->Reserved = 0;
> - pPage1->Configuration =
> le32_to_cpu(configuration);
> + pPage1->Configuration =
> cpu_to_le32(configuration);
> }
>
> - ddvprintk(("id=%d width=%d factor=%x offset=%x
> flags=%x request=%x configuration=%x\n",
> + ddvprintk(("id=%d width=%d factor=%x offset=%x
> negoFlags=%x request=%x configuration=%x\n",
> id, dv->now.width,
> dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
> break;
>
> @@ -5307,9 +5307,9 @@
> offset, &val, &configuration,
> negoFlags);
> dnegoprintk(("Setting Min: id=%d
> width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
> id, width, factor, offset,
> negoFlags, val, configuration));
> - pPage1->RequestedParameters = le32_to_cpu(val);
> + pPage1->RequestedParameters = cpu_to_le32(val);
> pPage1->Reserved = 0;
> - pPage1->Configuration =
> le32_to_cpu(configuration);
> + pPage1->Configuration =
> cpu_to_le32(configuration);
> }
> ddvprintk(("id=%d width=%d factor=%x offset=%x
> request=%x config=%x negoFlags=%x\n",
> id, width, factor, offset, val,
> configuration, negoFlags));
> @@ -5383,12 +5383,12 @@
> if (pPage1) {
> mptscsih_setDevicePage1Flags (width,
> factor, offset, &val,
> &configuration,
> dv->now.flags);
> - dnegoprintk(("Finish: id=%d width=%d
> offset=%d factor=%x flags=%x request=%x config=%x\n",
> + dnegoprintk(("Finish: id=%d width=%d
> offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
> id, width, offset, factor,
> dv->now.flags, val, configuration));
>
> - pPage1->RequestedParameters = le32_to_cpu(val);
> + pPage1->RequestedParameters = cpu_to_le32(val);
> pPage1->Reserved = 0;
> - pPage1->Configuration =
> le32_to_cpu(configuration);
> + pPage1->Configuration =
> cpu_to_le32(configuration);
> }
>
> ddvprintk(("Finish: id=%d offset=%d factor=%x
> width=%d request=%x config=%x\n",
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
