> +/**
> + * sas_rport_alloc -- allocates and initialize a SAS
> remote port structure
> + * @grandparent: Parent device of the parent SAS port
> + * @port: Port number of the parent SAS port
> + * @channel: SCSI Core channel number
> + * @id: SCSI Core target id
> + *
> + * Allocates an SAS remote port structure, connected to the
> port @port of the
> + * Scsi_Host or sas_rport specified by @grandparent.
> + *
> + * Note:
> + * @channel and @id only make sense for sas ports that
> support protocols
> + * support by the SCSI subsystem (ssp, stp or direct
> attached sata).
> + *
> + * @id will go away soon, and there will be no visible
> SPI-ish target
> + * ID visible to SAS LLDDs.
> + *
> + * Returns:
> + * SAS port allocated or %NULL if the allocation failed.
> + */
> +struct sas_rport *sas_rport_alloc(struct device *grandparent,
> + int port, uint channel, uint id)
> +{
> + struct Scsi_Host *shost = dev_to_shost(grandparent);
> + struct sas_port *parent;
> + struct sas_rport *rport;
> +
> + parent = sas_port_lookup(grandparent, port);
> + if (!parent)
> + return NULL;
So this is odd... grandparent ? why pass in port # (you should
know the object already)? why is channel skipping over / not
associated with the local port ?
What I would have expected is :
- sas_port_alloc() to either:
a) also have a "channel" argument, which gets saved in the local
port.
-or-
b) The port # is actually used as the channel #.
- sas_rport_alloc() becomes:
sas_rport_alloc(struct device *parent, uint id)
Where parent is the local port. You can still obtain the shost
via dev_to_shost(parent), and you can kill all that port searching
logic.
I'll point out, but not delve into - that you've avoided the target
id bindings again, thus forcing the lldd's/adapters to maintain tables
of port#/SASaddr to target id (if they care, and I believe enterprise
storage will care!). I can understand if you're going to eventually
insert a generic abstraction layer for scsi's b/c/t/l addressing
scheme, but since it's not here today, I expect you to hold SAS to the
same "code sharing" level as FC.
Also, to deal with cable pulls, SAS reconfiguration and rescanning,
I expect that you will need to add in the block/unblock functionality
that the FC transport has. [Note: we've seen an issue in the current
FC design, so expect a transport update].
> +void sas_rport_add(struct sas_rport *rport)
> +{
> ....
> + if (identify->device_type == SAS_END_DEVICE &&
> + (identify->target_port_protocols &
> + (SAS_PROTOCOL_SSP|SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA)))
> + scsi_scan_target(&rport->dev, rport->channel,
> + rport->id, ~0, 0);
I highly recommend the use of workqueues for the scan function as we
did in the fc transport.
-- james s
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
