ISP4xxx driver Mailbox routines.
Signed-off-by: Andrew Vasquez <[EMAIL PROTECTED]>
---
drivers/scsi/qla4xxx/ql4_mbx.c | 1132 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 1132 insertions(+), 0 deletions(-)
create mode 100644 drivers/scsi/qla4xxx/ql4_mbx.c
f5b56bf482abb9d96f2d542fbef6957f2f52d545
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
new file mode 100644
--- /dev/null
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -0,0 +1,1132 @@
+/*
+ * Copyright (c) 2003-2005 QLogic Corporation
+ * QLogic Linux iSCSI Driver
+ *
+ * This program includes a device driver for Linux 2.6 that may be
+ * distributed with QLogic hardware specific firmware binary file.
+ * You may modify and redistribute the device driver code under the
+ * GNU General Public License as published by the Free Software
+ * Foundation (version 2 or a later version) and/or under the
+ * following terms, as applicable:
+ *
+ * 1. Redistribution of source code must retain the above
+ * copyright notice, this list of conditions and the
+ * following disclaimer.
+ *
+ * 2. Redistribution in binary form must reproduce the above
+ * copyright notice, this list of conditions and the
+ * following disclaimer in the documentation and/or other
+ * materials provided with the distribution.
+ *
+ * 3. The name of QLogic Corporation may not be used to
+ * endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * You may redistribute the hardware specific firmware binary file
+ * under the following terms:
+ *
+ * 1. Redistribution of source code (only if applicable),
+ * must retain the above copyright notice, this list of
+ * conditions and the following disclaimer.
+ *
+ * 2. Redistribution in binary form must reproduce the above
+ * copyright notice, this list of conditions and the
+ * following disclaimer in the documentation and/or other
+ * materials provided with the distribution.
+ *
+ * 3. The name of QLogic Corporation may not be used to
+ * endorse or promote products derived from this software
+ * without specific prior written permission
+ *
+ * REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
+ * THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
+ * CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
+ * OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
+ * TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
+ * ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
+ * COMBINATION WITH THIS PROGRAM.
+ */
+
+#include "ql4_def.h"
+
+#include <linux/delay.h>
+
+/*
+ * externals
+ */
+extern int ql4xportdownretrycount;
+extern int ql4xdiscoverywait;
+extern void qla4xxx_isns_build_entity_id(scsi_qla_host_t *);
+extern int qla4xxx_eh_wait_for_active_target_commands(scsi_qla_host_t *, int,
+ int lun);
+
+/**************************************************************************
+ * qla4xxx_mailbox_command
+ * This routine sssue mailbox commands and waits for completion.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ * inCount - number of mailbox registers to load.
+ * outCount - number of mailbox registers to return.
+ * mbx_cmd - data pointer for mailbox in registers.
+ * mbx_sts - data pointer for mailbox out registers.
+ *
+ * Output:
+ * mbx_sts - returned mailbox out data.
+ *
+ * Remarks:
+ * If outCount is 0, this routine completes successfully WITHOUT waiting
+ * for the mailbox command to complete.
+ *
+ * Returns:
+ * QLA_SUCCESS - Mailbox command completed successfully
+ * QLA_ERROR - Mailbox command competed in error.
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_mailbox_command(scsi_qla_host_t * ha, uint8_t inCount,
+ uint8_t outCount, uint32_t * mbx_cmd, uint32_t * mbx_sts)
+{
+ int status = QLA_ERROR;
+ uint8_t i;
+ u_long wait_count;
+ uint32_t intr_status;
+ unsigned long flags = 0;
+ DECLARE_WAITQUEUE(wait, current);
+
+ down(&ha->mbox_sem);
+
+ /* Mailbox code active */
+ set_bit(AF_MBOX_COMMAND, &ha->flags);
+
+ /* Make sure that pointers are valid */
+ if (!mbx_cmd || !mbx_sts) {
+ DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
+ "pointer\n", ha->host_no, __func__));
+ goto mbox_exit;
+ }
+
+ /* To prevent overwriting mailbox registers for a command that has
+ * not yet been serviced, check to see if a previously issued
+ * mailbox command is interrupting.
+ * -----------------------------------------------------------------
+ */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ intr_status = RD_REG_DWORD(&ha->reg->ctrl_status);
+ if (intr_status & CSR_SCSI_PROCESSOR_INTR) {
+ /* Service existing interrupt */
+ qla4xxx_interrupt_service_routine(ha, intr_status);
+ clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
+ }
+
+ /* Send the mailbox command to the firmware */
+ ha->mbox_status_count = outCount;
+ for (i = 0; i < outCount; i++)
+ ha->mbox_status[i] = 0;
+
+ /* Load all mailbox registers, except mailbox 0. */
+ for (i = 1; i < inCount; i++)
+ WRT_REG_DWORD(&ha->reg->mailbox[i], mbx_cmd[i]);
+
+ /* Wakeup firmware */
+ WRT_REG_DWORD(&ha->reg->mailbox[0], mbx_cmd[0]);
+ PCI_POSTING(&ha->reg->mailbox[0]);
+ WRT_REG_DWORD(&ha->reg->ctrl_status, SET_RMASK(CSR_INTR_RISC));
+ PCI_POSTING(&ha->reg->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Wait for completion */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&ha->mailbox_wait_queue, &wait);
+
+ /*
+ * If we don't want status, don't wait for the mailbox command to
+ * complete. For example, MBOX_CMD_RESET_FW doesn't return status,
+ * you must poll the inbound Interrupt Mask for completion.
+ */
+ if (outCount == 0) {
+ status = QLA_SUCCESS;
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&ha->mailbox_wait_queue, &wait);
+ goto mbox_exit;
+ }
+
+ /* Wait for command to complete */
+ wait_count = jiffies + MBOX_TOV * HZ;
+ while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
+ if (wait_count <= jiffies)
+ break;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ intr_status = RD_REG_DWORD(&ha->reg->ctrl_status);
+ if (intr_status & INTR_PENDING) {
+ /*
+ * Service the interrupt.
+ * The ISR will save the mailbox status registers
+ * to a temporary storage location in the adapter
+ * structure.
+ */
+ ha->mbox_status_count = outCount;
+ qla4xxx_interrupt_service_routine(ha, intr_status);
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /*
+ * Delay for 10 microseconds
+ * NOTE: Interrupt_handler may be called here,
+ * if interrupts are enabled
+ */
+#if 0
+ udelay(10);
+
+#else /* */
+ schedule_timeout(10);
+
+#endif /* */
+ } /* wait loop */
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&ha->mailbox_wait_queue, &wait);
+
+ /* Check for mailbox timeout. */
+ if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
+ DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...,"
+ " Scheduling Adapter Reset\n", ha->host_no, mbx_cmd[0]));
+ ha->mailbox_timeout_count++;
+ mbx_sts[0] = (-1);
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ goto mbox_exit;
+ }
+
+ /*
+ * Copy the mailbox out registers to the caller's mailbox in/out
+ * structure.
+ */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ for (i = 0; i < outCount; i++)
+ mbx_sts[i] = ha->mbox_status[i];
+
+ /* Set return status and error flags (if applicable). */
+ switch (ha->mbox_status[0]) {
+ case MBOX_STS_COMMAND_COMPLETE:
+ status = QLA_SUCCESS;
+ break;
+
+ case MBOX_STS_INTERMEDIATE_COMPLETION:
+ status = QLA_SUCCESS;
+ break;
+
+ case MBOX_STS_BUSY:
+ DEBUG2( printk("scsi%ld: %s: Cmd = %08X, ISP BUSY\n",
+ ha->host_no, __func__, mbx_cmd[0]));
+ ha->mailbox_timeout_count++;
+ break;
+
+ default:
+ DEBUG2(printk("scsi%ld: %s: **** FAILED, cmd = %08X, "
+ "sts = %08X ****\n", ha->host_no, __func__, mbx_cmd[0],
+ mbx_sts[0]));
+ break;
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+mbox_exit:
+ clear_bit(AF_MBOX_COMMAND, &ha->flags);
+ clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
+ up(&ha->mbox_sem);
+
+ return status;
+}
+
+#if 0
+int qla4xxx_send_noop(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_NOP;
+ if (qla4xxx_mailbox_command(ha, 1, 1, &mbox_cmd[0], &mbox_sts[0])
+ != QLA_SUCCESS) {
+ DEBUG2( printk(KERN_INFO "scsi%d: NOP failed\n", ha->host_no));
+ return (QLA_ERROR);
+ }
+
+ else {
+ return (QLA_SUCCESS);
+ }
+}
+
+int qla4xxx_mbx_test(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int i;
+ int status;
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_REGISTER_TEST;
+ mbox_cmd[1] = 0x11111111;
+ mbox_cmd[2] = 0x22222222;
+ mbox_cmd[3] = 0x33333333;
+ mbox_cmd[4] = 0x44444444;
+ mbox_cmd[5] = 0x55555555;
+ mbox_cmd[6] = 0x66666666;
+ mbox_cmd[7] = 0x77777777;
+ if (qla4xxx_mailbox_command(ha, 8, 8, &mbox_cmd[0], &mbox_sts[0])
+ != QLA_SUCCESS) {
+ return (QLA_ERROR);
+ }
+ if (mbox_sts[1] != 0x11111111 || mbox_sts[2] != 0x22222222
+ || mbox_sts[3] != 0x33333333 || mbox_sts[4] != 0x44444444
+ || mbox_sts[5] != 0x55555555 || mbox_sts[6] != 0x66666666
+ || mbox_sts[7] != 0x77777777) {
+ status = QLA_ERROR;
+ }
+
+ else {
+ status = QLA_SUCCESS;
+ }
+ return (status);
+}
+
+#endif /* */
+
+/*
+ * qla4xxx_issue_iocb
+ * Issue IOCB using mailbox command
+ *
+ * Input:
+ * ha = adapter state pointer.
+ * buffer = buffer pointer.
+ * phys_addr = physical address of buffer.
+ * size = size of buffer.
+ * TARGET_QUEUE_LOCK must be released.
+ * ADAPTER_STATE_LOCK must be released.
+ *
+ * Returns:
+ * qla2x00 local function return status code.
+ *
+ * Context:
+ * Kernel context.
+ */
+int
+qla4xxx_issue_iocb(scsi_qla_host_t * ha, void *buffer, dma_addr_t phys_addr,
+ size_t size)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status;
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_EXECUTE_IOCB_A64;
+ mbox_cmd[1] = 0;
+ mbox_cmd[2] = LSDW(phys_addr);
+ mbox_cmd[3] = MSDW(phys_addr);
+ status = qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]);
+ return status;
+}
+
+int
+qla4xxx_conn_close_sess_logout(scsi_qla_host_t * ha, uint16_t fw_ddb_index,
+ uint16_t connection_id, uint16_t option)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
+ mbox_cmd[1] = fw_ddb_index;
+ mbox_cmd[2] = connection_id;
+ mbox_cmd[3] = LOGOUT_OPTION_RELOGIN;
+ if (qla4xxx_mailbox_command(ha, 4, 2, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_CONN_CLOSE_SESS_LOGOUT "
+ "option %04x failed sts %04X %04X", ha->host_no, __func__,
+ option, mbox_sts[0], mbox_sts[1]));
+ if (mbox_sts[0] == 0x4005)
+ DEBUG2(printk("%s reason %04X\n", __func__,
+ mbox_sts[1]));
+ }
+ return QLA_SUCCESS;
+}
+
+int
+qla4xxx_clear_database_entry(scsi_qla_host_t * ha, uint16_t fw_ddb_index)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_CLEAR_DATABASE_ENTRY;
+ mbox_cmd[1] = fw_ddb_index;
+ if (qla4xxx_mailbox_command(ha, 2, 5, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ return QLA_ERROR;
+ }
+ return QLA_SUCCESS;
+}
+
+/**************************************************************************
+ * qla4xxx_initialize_fw_cb
+ * This routine initializes the firmware control block for the
+ * specified adapter.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ *
+ * Returns:
+ * QLA_SUCCESS - Successfully initialized firmware ctrl block
+ * QLA_ERROR - Failed to initialize firmware ctrl block
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_initialize_fw_cb(scsi_qla_host_t * ha)
+{
+ INIT_FW_CTRL_BLK *init_fw_cb;
+ dma_addr_t init_fw_cb_dma;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_ERROR;
+
+ init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
+ sizeof(INIT_FW_CTRL_BLK), &init_fw_cb_dma, GFP_KERNEL);
+ if (init_fw_cb == NULL) {
+ DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
+ ha->host_no, __func__));
+ return 10;
+ }
+ memset(init_fw_cb, 0, sizeof(INIT_FW_CTRL_BLK));
+
+ /* Get Initialize Firmware Control Block. */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
+ mbox_cmd[2] = LSDW(init_fw_cb_dma);
+ mbox_cmd[3] = MSDW(init_fw_cb_dma);
+ if (qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ dma_free_coherent(&ha->pdev->dev, sizeof(INIT_FW_CTRL_BLK),
+ init_fw_cb, init_fw_cb_dma);
+ return status;
+ }
+
+ /* Initialize request and response queues. */
+ qla4xxx_init_rings(ha);
+
+ /* Fill in the request and response queue information. */
+ init_fw_cb->ReqQConsumerIndex = cpu_to_le16(ha->request_out);
+ init_fw_cb->ComplQProducerIndex = cpu_to_le16(ha->response_in);
+ init_fw_cb->ReqQLen = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
+ init_fw_cb->ComplQLen = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
+ init_fw_cb->ReqQAddrLo = cpu_to_le32(LSDW(ha->request_dma));
+ init_fw_cb->ReqQAddrHi = cpu_to_le32(MSDW(ha->request_dma));
+ init_fw_cb->ComplQAddrLo = cpu_to_le32(LSDW(ha->response_dma));
+ init_fw_cb->ComplQAddrHi = cpu_to_le32(MSDW(ha->response_dma));
+ init_fw_cb->ShadowRegBufAddrLo = cpu_to_le32(LSDW(ha->shadow_regs_dma));
+ init_fw_cb->ShadowRegBufAddrHi = cpu_to_le32(MSDW(ha->shadow_regs_dma));
+
+ /* Set up required options. */
+ init_fw_cb->FwOptions |=
+ __constant_cpu_to_le16(FWOPT_SESSION_MODE | FWOPT_INITIATOR_MODE);
+ init_fw_cb->FwOptions &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
+
+ /* Save some info in adapter structure. */
+ ha->firmware_options = le16_to_cpu(init_fw_cb->FwOptions);
+ ha->tcp_options = le16_to_cpu(init_fw_cb->TCPOptions);
+ ha->heartbeat_interval = init_fw_cb->HeartbeatInterval;
+ ha->isns_server_port_number =
+ le16_to_cpu(init_fw_cb->iSNSServerPortNumber);
+ memcpy(ha->ip_address, init_fw_cb->IPAddr,
+ min(sizeof(ha->ip_address), sizeof(init_fw_cb->IPAddr)));
+ memcpy(ha->subnet_mask, init_fw_cb->SubnetMask,
+ min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->SubnetMask)));
+ memcpy(ha->isns_ip_address, init_fw_cb->iSNSIPAddr,
+ min(sizeof(ha->isns_ip_address), sizeof(init_fw_cb->iSNSIPAddr)));
+ memcpy(ha->name_string, init_fw_cb->iSCSINameString,
+ min(sizeof(ha->name_string), sizeof(init_fw_cb->iSCSINameString)));
+ memcpy(ha->alias, init_fw_cb->Alias,
+ min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));
+
+ /* Save Command Line Paramater info */
+ ha->port_down_retry_count = le16_to_cpu(init_fw_cb->KeepAliveTimeout);
+ ha->discovery_wait = ql4xdiscoverywait;
+
+ /* Send Initialize Firmware Control Block. */
+ mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
+ mbox_cmd[1] = 0;
+ mbox_cmd[2] = LSDW(init_fw_cb_dma);
+ mbox_cmd[3] = MSDW(init_fw_cb_dma);
+ if (qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]) ==
+ QLA_SUCCESS) {
+ status = QLA_SUCCESS;
+ } else {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_INITIALIZE_FIRMWARE "
+ "failed w/ status %04X\n", ha->host_no, __func__,
+ mbox_sts[0]));
+ }
+ dma_free_coherent(&ha->pdev->dev, sizeof(INIT_FW_CTRL_BLK), init_fw_cb,
+ init_fw_cb_dma);
+
+ return status;
+}
+
+/**************************************************************************
+ * qla4xxx_get_dhcp_ip_address
+ * This routine retrieves the IP Address obtained via DHCP for the
+ * specified adapter.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ *
+ * Returns:
+ * QLA_SUCCESS - Successfully obtained DHCP IP Address
+ * QLA_ERROR - Failed to obtained
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_get_dhcp_ip_address(scsi_qla_host_t * ha)
+{
+ INIT_FW_CTRL_BLK *init_fw_cb;
+ dma_addr_t init_fw_cb_dma;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
+ sizeof(INIT_FW_CTRL_BLK), &init_fw_cb_dma, GFP_KERNEL);
+ if (init_fw_cb == NULL) {
+ printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
+ __func__);
+ return 10;
+ }
+
+ /* Get Initialize Firmware Control Block. */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ memset(init_fw_cb, 0, sizeof(INIT_FW_CTRL_BLK));
+ mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
+ mbox_cmd[2] = LSDW(init_fw_cb_dma);
+ mbox_cmd[3] = MSDW(init_fw_cb_dma);
+
+ if (qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
+ ha->host_no, __func__));
+ dma_free_coherent(&ha->pdev->dev, sizeof(INIT_FW_CTRL_BLK),
+ init_fw_cb, init_fw_cb_dma);
+ return QLA_ERROR;
+ }
+
+ /* Save IP Address. */
+ memcpy(ha->ip_address, init_fw_cb->IPAddr,
+ min(sizeof(ha->ip_address), sizeof(init_fw_cb->IPAddr)));
+ memcpy(ha->subnet_mask, init_fw_cb->SubnetMask,
+ min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->SubnetMask)));
+
+ dma_free_coherent(&ha->pdev->dev, sizeof(INIT_FW_CTRL_BLK), init_fw_cb,
+ init_fw_cb_dma);
+
+ return QLA_SUCCESS;
+}
+
+/**************************************************************************
+ * qla4xxx_get_firmware_state
+ * This routine retrieves the firmware state for the specified adapter.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ *
+ * Returns:
+ * QLA_SUCCESS - Successfully retrieved firmware state
+ * QLA_ERROR - Failed to retrieve firmware state
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_get_firmware_state(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ /* Get firmware version */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_GET_FW_STATE;
+ if (qla4xxx_mailbox_command(ha, 1, 4, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
+ "status %04X\n", ha->host_no, __func__, mbox_sts[0]));
+ return QLA_ERROR;
+ }
+ ha->firmware_state = mbox_sts[1];
+ ha->board_id = mbox_sts[2];
+ ha->addl_fw_state = mbox_sts[3];
+ DEBUG2(printk("%s firmware_state=0x%x\n", __func__,
+ ha->firmware_state));
+
+ return QLA_SUCCESS;
+}
+
+/**************************************************************************
+ * qla4xxx_get_firmware_status
+ * This routine retrieves the firmware status for the specified adapter.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ *
+ * Returns:
+ * QLA_SUCCESS - Successfully retrieved firmware status
+ * QLA_ERROR - Failed to retrieve firmware status
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_get_firmware_status(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ /* Get firmware version */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_GET_FW_STATUS;
+ if (qla4xxx_mailbox_command(ha, 1, 3, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
+ "status %04X\n", ha->host_no, __func__, mbox_sts[0]));
+ return QLA_ERROR;
+ }
+
+ /* High-water mark of IOCBs */
+ ha->iocb_hiwat = mbox_sts[2];
+ if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
+ ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
+ else
+ ql4_printk(KERN_INFO, ha, "WARNING!!! You have less than %d "
+ "firmare IOCBs available (%d).\n", IOCB_HIWAT_CUSHION,
+ ha->iocb_hiwat);
+
+ return QLA_SUCCESS;
+}
+
+/**************************************************************************
+ * qla4xxx_get_fwddb_entry
+ * This routine retrieves the firmware's device database entry.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ * fw_ddb_index - Firmware's device database index
+ * fw_ddb_entry - Pointer to firmware's device database entry structure
+ * num_valid_ddb_entries - Pointer to number of valid ddb entries
+ * next_ddb_index - Pointer to next valid device database index
+ * fw_ddb_device_state - Pointer to device state
+ *
+ * Output:
+ * fw_ddb_entry - Fills in structure if pointer is supplied
+ * num_valid_ddb_entries - Fills in if pointer is supplied
+ * next_ddb_index - Fills in if pointer is supplied
+ * fw_ddb_device_state - Fills in if pointer is supplied
+ *
+ * Returns:
+ * QLA_SUCCESS - Successfully retrieved ddb info from firmware
+ * QLA_ERROR - Failed to retrieve ddb info from firmware
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_get_fwddb_entry(scsi_qla_host_t *ha, uint16_t fw_ddb_index,
+ DEV_DB_ENTRY *fw_ddb_entry, dma_addr_t fw_ddb_entry_dma,
+ uint32_t *num_valid_ddb_entries, uint32_t *next_ddb_index,
+ uint32_t *fw_ddb_device_state, uint32_t *conn_err_detail,
+ uint16_t *tcp_source_port_num, uint16_t *connection_id)
+{
+ int status = QLA_ERROR;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ /* Make sure the device index is valid */
+ if (fw_ddb_index >= MAX_DDB_ENTRIES) {
+ DEBUG2(printk("scsi%ld: %s: index [%d] out of range.\n",
+ ha->host_no, __func__, fw_ddb_index));
+ goto exit_get_fwddb;
+ }
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY;
+ mbox_cmd[1] = (uint32_t) fw_ddb_index;
+ mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
+ mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
+ if (qla4xxx_mailbox_command(ha, 4, 7, &mbox_cmd[0], &mbox_sts[0]) ==
+ QLA_ERROR) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed "
+ "with status 0x%04X\n", ha->host_no, __func__,
+ mbox_sts[0]));
+ goto exit_get_fwddb;
+ }
+ if (fw_ddb_index != mbox_sts[1]) {
+ DEBUG2(printk("scsi%ld: %s: index mismatch [%d] != [%d].\n",
+ ha->host_no, __func__, fw_ddb_index, mbox_sts[1]));
+ goto exit_get_fwddb;
+ }
+ if (fw_ddb_entry) {
+ ql4_printk(KERN_INFO, ha, "DDB[%d] MB0 %04x Tot %d Next %d "
+ "State %04x ConnErr %08x %d.%d.%d.%d:%04d \"%s\"\n",
+ fw_ddb_index, mbox_sts[0], mbox_sts[2], mbox_sts[3],
+ mbox_sts[4], mbox_sts[5], fw_ddb_entry->ipAddr[0],
+ fw_ddb_entry->ipAddr[1], fw_ddb_entry->ipAddr[2],
+ fw_ddb_entry->ipAddr[3],
+ le16_to_cpu(fw_ddb_entry->portNumber),
+ fw_ddb_entry->iscsiName);
+ }
+ if (num_valid_ddb_entries)
+ *num_valid_ddb_entries = mbox_sts[2];
+ if (next_ddb_index)
+ *next_ddb_index = mbox_sts[3];
+ if (fw_ddb_device_state)
+ *fw_ddb_device_state = mbox_sts[4];
+
+ /*
+ * RA: This mailbox has been changed to pass connection error and
+ * details. Its true for ISP4010 as per Version E - Not sure when it
+ * was changed. Get the time2wait from the fw_dd_entry field :
+ * default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY
+ * struct.
+ */
+ if (conn_err_detail)
+ *conn_err_detail = mbox_sts[5];
+ if (tcp_source_port_num)
+ *tcp_source_port_num = (uint16_t) mbox_sts[6] >> 16;
+ if (connection_id)
+ *connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
+ status = QLA_SUCCESS;
+
+exit_get_fwddb:
+ return status;
+}
+
+/**************************************************************************
+ * qla4xxx_set_fwddb_entry
+ * This routine initializes or updates the adapter's device database
+ * entry for the specified device.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ * fw_ddb_index - Firmware's device database index
+ * fw_ddb_entry - Pointer to firmware's device database entry
+ * structure, or NULL.
+ *
+ * Output:
+ * None
+ *
+ * Remarks:
+ * This routine also triggers a login for the specified device.
+ * Therefore, it may also be used as a secondary login routine when
+ * a NULL pointer is specified for the fw_ddb_entry.
+ *
+ * Returns:
+ * QLA_SUCCESS - Successfully set ddb_entry in firmware
+ * QLA_ERROR - Failed to set ddb_entry in firmware
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_set_ddb_entry(scsi_qla_host_t * ha, uint16_t fw_ddb_index,
+ DEV_DB_ENTRY * fw_ddb_entry, dma_addr_t fw_ddb_entry_dma)
+{
+ int status = QLA_ERROR;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ /* Do not wait for completion. The firmware will send us an
+ * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
+ */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_SET_DATABASE_ENTRY;
+ mbox_cmd[1] = (uint32_t) fw_ddb_index;
+ mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
+ mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
+ status = qla4xxx_mailbox_command(ha, 4, 1, &mbox_cmd[0], &mbox_sts[0]);
+ return status;
+}
+
+int
+qla4xxx_conn_open_session_login(scsi_qla_host_t * ha, uint16_t fw_ddb_index)
+{
+ int status = QLA_ERROR;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ /* Do not wait for completion. The firmware will send us an
+ * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
+ */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_CONN_OPEN_SESS_LOGIN;
+ mbox_cmd[1] = (uint32_t) fw_ddb_index;
+ mbox_cmd[2] = 0;
+ mbox_cmd[3] = 0;
+ mbox_cmd[4] = 0;
+ status = qla4xxx_mailbox_command(ha, 4, 0, &mbox_cmd[0], &mbox_sts[0]);
+ DEBUG2(printk("%s fw_ddb_index=%d status=%d mbx0_1=0x%x :0x%x\n",
+ __func__, fw_ddb_index, status, mbox_sts[0], mbox_sts[1]);)
+
+ return status;
+}
+
+/**************************************************************************
+ * qla4xxx_get_crash_record
+ * This routine retrieves a crash record from the QLA4010 after an
+ * 8002h aen.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ *
+ * Returns:
+ * None
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+void
+qla4xxx_get_crash_record(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ CRASH_RECORD *crash_record = NULL;
+ dma_addr_t crash_record_dma = 0;
+ uint32_t crash_record_size = 0;
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_cmd));
+
+ /* Get size of crash record. */
+ mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
+ if (qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
+ ha->host_no, __func__));
+ goto exit_get_crash_record;
+ }
+ crash_record_size = mbox_sts[4];
+ if (crash_record_size == 0) {
+ DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
+ ha->host_no, __func__));
+ goto exit_get_crash_record;
+ }
+
+ /* Alloc Memory for Crash Record. */
+ crash_record = dma_alloc_coherent(&ha->pdev->dev, crash_record_size,
+ &crash_record_dma, GFP_KERNEL);
+ if (crash_record == NULL)
+ goto exit_get_crash_record;
+
+ /* Get Crash Record. */
+ mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
+ mbox_cmd[2] = LSDW(crash_record_dma);
+ mbox_cmd[3] = MSDW(crash_record_dma);
+ mbox_cmd[4] = crash_record_size;
+ if (qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS)
+ goto exit_get_crash_record;
+
+ /* Dump Crash Record. */
+
+exit_get_crash_record:
+ if (crash_record)
+ dma_free_coherent(&ha->pdev->dev, crash_record_size,
+ crash_record, crash_record_dma);
+}
+
+/**************************************************************************
+ * qla4xxx_get_conn_event_log
+ * This routine retrieves the connection event log
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ *
+ * Returns:
+ * None
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+void
+qla4xxx_get_conn_event_log(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ CONN_EVENT_LOG_ENTRY *event_log = NULL;
+ dma_addr_t event_log_dma = 0;
+ uint32_t event_log_size = 0;
+ uint32_t num_valid_entries;
+ /*uint32_t oldest_entry = 0; */
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_cmd));
+
+ /* Get size of crash record. */
+ mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
+ if (qla4xxx_mailbox_command(ha, 4, 5, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS)
+ goto exit_get_event_log;
+
+ event_log_size = mbox_sts[4];
+ if (event_log_size == 0)
+ goto exit_get_event_log;
+
+ /* Alloc Memory for Crash Record. */
+ event_log = dma_alloc_coherent(&ha->pdev->dev, event_log_size,
+ &event_log_dma, GFP_KERNEL);
+ if (event_log == NULL)
+ goto exit_get_event_log;
+
+ /* Get Crash Record. */
+ mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
+ mbox_cmd[2] = LSDW(event_log_dma);
+ mbox_cmd[3] = MSDW(event_log_dma);
+ if (qla4xxx_mailbox_command(ha, 4, 5, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
+ "log!\n", ha->host_no, __func__));
+ goto exit_get_event_log;
+ }
+
+ /* Dump Event Log. */
+ num_valid_entries = mbox_sts[1];
+
+ //FIXME: Code wraparound entries later ...
+ //if (num_valid_entries > MAX_CONN_EVENT_LOG_ENTRIES)
+ // oldest_entry = num_valid_entries % MAX_CONN_EVENT_LOG_ENTRIES;
+exit_get_event_log:
+ if (event_log)
+ dma_free_coherent(&ha->pdev->dev, event_log_size, event_log,
+ event_log_dma);
+}
+
+/**************************************************************************
+ * qla4xxx_reset_lun
+ * This routine performs a LUN RESET on the specified target/lun.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ * ddb_entry - Pointer to device database entry
+ * lun_entry - Pointer to lun entry structure
+ *
+ * Remarks:
+ * The caller must ensure that the ddb_entry and lun_entry pointers
+ * are valid before calling this routine.
+ *
+ * Returns:
+ * QLA_SUCCESS - lun reset completed successfully
+ * QLA_ERROR - lun reset failed
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_reset_lun(scsi_qla_host_t * ha, ddb_entry_t * ddb_entry, int lun)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_SUCCESS;
+
+ DEBUG2(printk("scsi%ld:%d:%d: lun reset issued\n", ha->host_no,
+ ddb_entry->os_target_id, lun));
+
+ /*
+ * Send lun reset command to ISP, so that the ISP will return all
+ * outstanding requests with RESET status
+ */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_LUN_RESET;
+ mbox_cmd[1] = ddb_entry->fw_ddb_index;
+ mbox_cmd[2] = lun << 8;
+ mbox_cmd[5] = 0x01; /* Immediate Command Enable */
+ qla4xxx_mailbox_command(ha, 6, 1, &mbox_cmd[0], &mbox_sts[0]);
+ if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
+ mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
+ status = QLA_ERROR;
+/*FIXME*/
+ /*spin_lock_irq(ha->host->host_lock);*/
+ return status;
+}
+
+int
+qla4xxx_isns_enable(scsi_qla_host_t * ha, uint32_t isns_ip_addr,
+ uint16_t isns_server_port_num)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ qla4xxx_isns_build_entity_id(ha);
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_SET_ISNS_SERVICE;
+ mbox_cmd[1] = ISNS_ENABLE;
+ mbox_cmd[2] = isns_ip_addr;
+ mbox_cmd[3] = isns_server_port_num;
+ if (qla4xxx_mailbox_command(ha, 4, 6, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS)
+ return (QLA_ERROR);
+
+ DEBUG2(printk("scsi%ld: Start iSNS Service %d.%d.%d.%d Port %04d...\n",
+ ha->host_no, (isns_ip_addr & 0x000000FF),
+ (isns_ip_addr & 0x0000FF00) >> 8,
+ (isns_ip_addr & 0x00FF0000) >> 16,
+ (isns_ip_addr & 0xFF000000) >> 24, isns_server_port_num));
+
+ return QLA_SUCCESS;
+}
+
+int
+qla4xxx_isns_disable(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ if (test_bit(ISNS_FLAG_ISNS_SRV_ENABLED, &ha->isns_flags)) {
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_SET_ISNS_SERVICE;
+ mbox_cmd[1] = ISNS_DISABLE;
+ if (qla4xxx_mailbox_command(ha, 2, 2, &mbox_cmd[0],
+ &mbox_sts[0]) != QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_SET_ISNS_SERVICE "
+ "failed w/ status %04X %04X\n", ha->host_no,
+ __func__, mbox_sts[0], mbox_sts[1]));
+ return QLA_ERROR;
+ }
+ }
+ clear_bit(ISNS_FLAG_ISNS_SRV_ENABLED, &ha->isns_flags);
+ ISNS_CLEAR_FLAGS(ha);
+ ha->isns_connection_id = 0;
+
+ //ha->isns_scn_conn_id = 0;
+ //ha->isns_esi_conn_id = 0;
+ //ha->isns_nsh_conn_id = 0;
+ ha->isns_remote_port_num = 0;
+ ha->isns_scn_port_num = 0;
+ ha->isns_esi_port_num = 0;
+ ha->isns_nsh_port_num = 0;
+ ha->isns_num_discovered_targets = 0;
+ memset(ha->isns_entity_id, 0, sizeof(ha->isns_entity_id));
+
+ return QLA_SUCCESS;
+}
+
+int
+qla4xxx_isns_status(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_SET_ISNS_SERVICE;
+ mbox_cmd[1] = ISNS_STATUS;
+ if (qla4xxx_mailbox_command(ha, 2, 2, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_SET_ISNS_SERVICE failed "
+ "w/ status %04X %04X\n", ha->host_no, __func__,
+ mbox_sts[0], mbox_sts[1]));
+ return QLA_ERROR;
+ }
+ return QLA_SUCCESS;
+}
+
+int
+qla4xxx_get_flash(scsi_qla_host_t * ha, dma_addr_t dma_addr, uint32_t offset,
+ uint32_t len)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_READ_FLASH;
+ mbox_cmd[1] = LSDW(dma_addr);
+ mbox_cmd[2] = MSDW(dma_addr);
+ mbox_cmd[3] = offset;
+ mbox_cmd[4] = len;
+ if (qla4xxx_mailbox_command(ha, 5, 2, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
+ "status %04X %04X, offset %08x, len %08x\n", ha->host_no,
+ __func__, mbox_sts[0], mbox_sts[1], offset, len));
+ return QLA_ERROR;
+ }
+ return QLA_SUCCESS;
+}
+
+/**************************************************************************
+ * qla4xxx_get_fw_version
+ * This routine retrieves the firmware version for the specified adapter.
+ *
+ * Input:
+ * ha - Pointer to host adapter structure.
+ *
+ * Output:
+ * None
+ *
+ * Remarks:
+ * In QLA4010, mailboxes 2 & 3 may hold an address for data. Make sure
+ * that we write 0 to those mailboxes, if unused.
+ *
+ * Returns:
+ * QLA_SUCCESS - Successfully retrieved firmware version
+ * QLA_ERROR - Failed to retrieve firmware version
+ *
+ * Context:
+ * Kernel context.
+ **************************************************************************/
+int
+qla4xxx_get_fw_version(scsi_qla_host_t * ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ /* Get firmware version. */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_ABOUT_FW;
+ if (qla4xxx_mailbox_command(ha, 4, 5, &mbox_cmd[0], &mbox_sts[0]) !=
+ QLA_SUCCESS) {
+ DEBUG2(printk("scsi%ld: %s: MBOX_CMD_ABOUT_FW failed w/ "
+ "status %04X\n", ha->host_no, __func__, mbox_sts[0]));
+ return QLA_ERROR;
+ }
+
+ /* Save firmware version information. */
+ ha->firmware_version[0] = mbox_sts[1];
+ ha->firmware_version[1] = mbox_sts[2];
+ ha->patch_number = mbox_sts[3];
+ ha->build_number = mbox_sts[4];
+
+ return QLA_SUCCESS;
+}
--
Andrew Vasquez
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
