So given that the HBA max_sectors_kb looks sufficiently large, my
interpretation of your article is the next place I need to look is at
ajusting SCSI_MAX_PHYS_SEGMENTS. Sounds like i can only increase this to
256. Does that than give me a max transfer size of 256 * page_size (4k) =
1MB? Is 1MB the limit or am I missing something?
thanks - jc
Douglas Gilbert wrote:
>
> john clyne wrote:
>> Can anyone give me some guidance on where in the IO stack I might be
>> running
>> into a 512KB limit on IO transfer sizes to an external FC device? I've
>> checked IO scheduler parameter
>> (/sys/block/<dev>/queue/{max_sectors_kb,max_hw_sectors_kb}. Both are set
>> to
>> 32767. I'm using Qlogic HBAs (qla2312), but I don't see any relevent
>> parameters. I'm running RHEL 4.0 with a 2.6.9-34 kernel. Any pointers
>> would
>> be greatly appreciated.
>
> John,
> I discuss the subject in this page:
> http://www.torque.net/sg/sg_io.html
> in the section titled:
> Maximum transfer size per command
>
> Mike C. has given you the answer for the block device
> interface (e.g. via /dev/sda); you should be able
> to do about 8 times better via the scsi generic
> interface (e.g. /dev/sg0).
>
> Doug Gilbert
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
View this message in context:
http://www.nabble.com/IO-transfer-limits-tf2953389.html#a8268682
Sent from the linux-scsi mailing list archive at Nabble.com.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
