This patch (as857) modifies the SG_GET_RESERVED_SIZE and
SG_SET_RESERVED_SIZE ioctls in the sg driver, capping the values at
the device's request_queue's max_sectors value. This will permit
cdrecord to obtain a legal value for the maximum transfer length,
fixing Bugzilla #7026.
The patch also caps the initial reserved_size value. There's no
reason to have a reserved buffer larger than max_sectors, since it
would be impossible to use the extra space.
The corresponding ioctls in the block layer are modified similarly,
and the initial value for the reserved_size is set as large as
possible. This will effectively make it default to max_sectors.
Note that the actual value is meaningless anyway, since block devices
don't have a reserved buffer.
Finally, the BLKSECTGET ioctl is added to sg, so that there will be a
uniform way for users to determine the actual max_sectors value for
any raw SCSI transport.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
---
Index: usb-2.6/drivers/scsi/sg.c
===================================================================
--- usb-2.6.orig/drivers/scsi/sg.c
+++ usb-2.6/drivers/scsi/sg.c
@@ -917,6 +917,8 @@ sg_ioctl(struct inode *inode, struct fil
return result;
if (val < 0)
return -EINVAL;
+ val = min_t(int, val,
+ sdp->device->request_queue->max_sectors * 512);
if (val != sfp->reserve.bufflen) {
if (sg_res_in_use(sfp) || sfp->mmap_called)
return -EBUSY;
@@ -925,7 +927,8 @@ sg_ioctl(struct inode *inode, struct fil
}
return 0;
case SG_GET_RESERVED_SIZE:
- val = (int) sfp->reserve.bufflen;
+ val = min_t(int, sfp->reserve.bufflen,
+ sdp->device->request_queue->max_sectors * 512);
return put_user(val, ip);
case SG_SET_COMMAND_Q:
result = get_user(val, ip);
@@ -1061,6 +1064,9 @@ sg_ioctl(struct inode *inode, struct fil
if (sdp->detached)
return -ENODEV;
return scsi_ioctl(sdp->device, cmd_in, p);
+ case BLKSECTGET:
+ return put_user(sdp->device->request_queue->max_sectors * 512,
+ ip);
default:
if (read_only)
return -EPERM; /* don't know so take safe approach */
@@ -2339,6 +2345,7 @@ sg_add_sfp(Sg_device * sdp, int dev)
{
Sg_fd *sfp;
unsigned long iflags;
+ int bufflen;
sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN);
if (!sfp)
@@ -2369,7 +2376,9 @@ sg_add_sfp(Sg_device * sdp, int dev)
if (unlikely(sg_big_buff != def_reserved_size))
sg_big_buff = def_reserved_size;
- sg_build_reserve(sfp, sg_big_buff);
+ bufflen = min_t(int, sg_big_buff,
+ sdp->device->request_queue->max_sectors * 512);
+ sg_build_reserve(sfp, bufflen);
SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: bufflen=%d, k_use_sg=%d\n",
sfp->reserve.bufflen, sfp->reserve.k_use_sg));
return sfp;
Index: usb-2.6/block/ll_rw_blk.c
===================================================================
--- usb-2.6.orig/block/ll_rw_blk.c
+++ usb-2.6/block/ll_rw_blk.c
@@ -1925,6 +1925,8 @@ blk_init_queue_node(request_fn_proc *rfn
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
+ q->sg_reserved_size = INT_MAX;
+
/*
* all done
*/
Index: usb-2.6/block/scsi_ioctl.c
===================================================================
--- usb-2.6.orig/block/scsi_ioctl.c
+++ usb-2.6/block/scsi_ioctl.c
@@ -78,7 +78,9 @@ static int sg_set_timeout(request_queue_
static int sg_get_reserved_size(request_queue_t *q, int __user *p)
{
- return put_user(q->sg_reserved_size, p);
+ unsigned val = min(q->sg_reserved_size, q->max_sectors << 9);
+
+ return put_user(val, p);
}
static int sg_set_reserved_size(request_queue_t *q, int __user *p)
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
