From: Eric Moore <[EMAIL PROTECTED]>
After host reset, the device are programmed to default asyn narrow nego.
We need to reprogram the parameter back to previous values. If the host
reset is called as a result of spi_dv_device() commands timing out, its
possible to get into an infinite loop of dv to host reset. This will
prevent that case, as we merely program old values. If host reset is
called outside context of domain validation, then we can call
spi_dv_device. Please apply.
Signed-off-by: Eric Moore <[EMAIL PROTECTED]>
Cc: Mark Haverkamp <[EMAIL PROTECTED]>
Cc: James Bottomley <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/message/fusion/mptbase.h | 1 +
drivers/message/fusion/mptspi.c | 23 +++++++++++++++++++++--
2 files changed, 22 insertions(+), 2 deletions(-)
diff -puN
drivers/message/fusion/mptbase.h~scsi-spi-transport-scsi-domain-validation-after-reset
drivers/message/fusion/mptbase.h
---
a/drivers/message/fusion/mptbase.h~scsi-spi-transport-scsi-domain-validation-after-reset
+++ a/drivers/message/fusion/mptbase.h
@@ -994,6 +994,7 @@ typedef struct _MPT_SCSI_HOST {
int scandv_wait_done;
long last_queue_full;
u16 tm_iocstatus;
+ u16 spi_pending;
struct list_head target_reset_list;
} MPT_SCSI_HOST;
diff -puN
drivers/message/fusion/mptspi.c~scsi-spi-transport-scsi-domain-validation-after-reset
drivers/message/fusion/mptspi.c
---
a/drivers/message/fusion/mptspi.c~scsi-spi-transport-scsi-domain-validation-after-reset
+++ a/drivers/message/fusion/mptspi.c
@@ -676,7 +676,9 @@ static void mptspi_dv_device(struct _MPT
return;
}
+ hd->spi_pending |= (1 << sdev->id);
spi_dv_device(sdev);
+ hd->spi_pending &= ~(1 << sdev->id);
if (sdev->channel == 1 &&
mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
@@ -1202,11 +1204,27 @@ mptspi_dv_renegotiate_work(struct work_s
container_of(work, struct work_queue_wrapper, work);
struct _MPT_SCSI_HOST *hd = wqw->hd;
struct scsi_device *sdev;
+ struct scsi_target *starget;
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ u32 nego;
kfree(wqw);
- shost_for_each_device(sdev, hd->ioc->sh)
- mptspi_dv_device(hd, sdev);
+ if (hd->spi_pending) {
+ shost_for_each_device(sdev, hd->ioc->sh) {
+ if (hd->spi_pending & (1 << sdev->id))
+ continue;
+ starget = scsi_target(sdev);
+ nego = mptspi_getRP(starget);
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+ mptspi_write_spi_device_pg1(starget, &pg1);
+ }
+ } else {
+ shost_for_each_device(sdev, hd->ioc->sh)
+ mptspi_dv_device(hd, sdev);
+ }
}
static void
@@ -1452,6 +1470,7 @@ mptspi_probe(struct pci_dev *pdev, const
init_waitqueue_head(&hd->scandv_waitq);
hd->scandv_wait_done = 0;
hd->last_queue_full = 0;
+ hd->spi_pending = 0;
/* Some versions of the firmware don't support page 0; without
* that we can't get the parameters */
_
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
