Olaf Kirch wrote:
> I recently ran into an oops that happens because you
> can shut down all of iSCSI even though you still have
> iSCSI targets mounted. It turned out that iscsi's
> scsi_host_template missed a THIS_MODULE, so
> reference counting wasn't done properly. Brief
> inspection showed that this seems to be a rather
> wide-spread problem. Here's a patch to address this.
>
I did not see this in scsi-misc so I am not sure if it matters or you
need a ack or signed off for iscsi, but the iscsi and iser parts look ok
Signed-off-by: Mike Christie <[EMAIL PROTECTED]>
> Index: linux-2.6/drivers/scsi/iscsi_tcp.c
> ===================================================================
> --- linux-2.6.orig/drivers/scsi/iscsi_tcp.c
> +++ linux-2.6/drivers/scsi/iscsi_tcp.c
> @@ -2133,6 +2133,7 @@ static void iscsi_tcp_session_destroy(st
> }
>
> static struct scsi_host_template iscsi_sht = {
> + .module = THIS_MODULE,
> .name = "iSCSI Initiator over TCP/IP",
> .queuecommand = iscsi_queuecommand,
> .change_queue_depth = iscsi_change_queue_depth,
> Index: linux-2.6/drivers/infiniband/ulp/iser/iscsi_iser.c
> ===================================================================
> --- linux-2.6.orig/drivers/infiniband/ulp/iser/iscsi_iser.c
> +++ linux-2.6/drivers/infiniband/ulp/iser/iscsi_iser.c
> @@ -543,6 +543,7 @@ iscsi_iser_ep_disconnect(__u64 ep_handle
> }
>
> static struct scsi_host_template iscsi_iser_sht = {
> + .module = THIS_MODULE,
> .name = "iSCSI Initiator over iSER, v." DRV_VER,
> .queuecommand = iscsi_queuecommand,
> .can_queue = ISCSI_XMIT_CMDS_MAX - 1,
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
