On Wed, 2007-05-09 at 20:50 -0800, Ed Lin wrote: > The correct internal mapping of stex controllers should be: > id:0~15, lun:0~7 (st_shasta) > id:0, lun:0~127 (st_yosemite) > id:0~127, lun:0 (st_vsc and st_vsc1) > > This patch reports the internal mapping to scsi mid layer, eliminating > the translation between scsi mid layer and firmware. To achieve this > goal, we also need to: > -- fail the REPORT_LUNS command for st_shasta because the > firmware is known to not report all actual luns > -- add an entry in scsi_devindo.c to force sequential lun scan > (for st_shasta controllers) > -- fail the REPORT_LUNS command for console device > -- remove special handling of REPORT_LUNS command for > st_yosemite, as there is no translation mapping now > > Signed-off-by: Ed Lin <[EMAIL PROTECTED]>
This looks great, thanks for doing it. I think it can be slid nicely into -rc1. James - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
