From: Stefan Richter <[EMAIL PROTECTED]>
Subject: Re: [PATCH 0/19] clean ups on the drivers
Date: Mon, 14 May 2007 17:39:06 +0200
> FUJITA Tomonori wrote:
> >> > There are two patches for each driver, removing the non-use-sg code
> >> > and converting to use the accessors.
> ...
> > I merged the two. And I finished cleaning up 35 drivers in total.
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/tomo/linux-2.6-bidi.git
> > cleanups
>
> According to what I see via gitweb, at least usb-storage, ieee1394/sbp2,
> and firewire/fw-sbp2 weren't treated yet. If somebody does so for the
> latter two: The shost->shost_gendev.parent has to be changed for
> scsi_dma_{un}map. I don't know if this can be done without breaking
> anything.
The drivers don't need to use scsi_dma_{un}map. For example, iscsi_tcp
(doesn't need dma mappings), ib_iser and ib_srp (the ib stack provides
something like scsi_dmap_{un}map) don't use them.
Here's a patch for ieee1394/sbp2, which does the minimum requirement,
which kills the non-use-sg case and use scsi_sg_count and scsi_sglist
macros.
>From 07037aac7f5b0a14158a44370e0306f95d9dfcdd Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <[EMAIL PROTECTED]>
Date: Mon, 14 May 2007 20:00:04 +0900
Subject: [PATCH] ieee1394/sbp2: convert to use the data buffer accessors
- remove the unnecessary map_single path.
- convert to use the new accessors for the sg lists and the
parameters.
Signed-off-by: FUJITA Tomonori <[EMAIL PROTECTED]>
---
drivers/ieee1394/sbp2.c | 75 ++--------------------------------------------
1 files changed, 4 insertions(+), 71 deletions(-)
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 4cb6fa2..d0db6f8 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -1488,69 +1488,6 @@ static void sbp2_prep_command_orb_sg(struct
sbp2_command_orb *orb,
}
}
-static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb,
- struct sbp2_fwhost_info *hi,
- struct sbp2_command_info *cmd,
- struct scatterlist *sgpnt,
- u32 orb_direction,
- unsigned int scsi_request_bufflen,
- void *scsi_request_buffer,
- enum dma_data_direction dma_dir)
-{
- cmd->dma_dir = dma_dir;
- cmd->dma_size = scsi_request_bufflen;
- cmd->dma_type = CMD_DMA_SINGLE;
- cmd->cmd_dma = dma_map_single(hi->host->device.parent,
- scsi_request_buffer,
- cmd->dma_size, cmd->dma_dir);
- orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
- orb->misc |= ORB_SET_DIRECTION(orb_direction);
-
- /* handle case where we get a command w/o s/g enabled
- * (but check for transfers larger than 64K) */
- if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) {
-
- orb->data_descriptor_lo = cmd->cmd_dma;
- orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen);
-
- } else {
- /* The buffer is too large. Turn this into page tables. */
-
- struct sbp2_unrestricted_page_table *sg_element =
- &cmd->scatter_gather_element[0];
- u32 sg_count, sg_len;
- dma_addr_t sg_addr;
-
- orb->data_descriptor_lo = cmd->sge_dma;
- orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
-
- /* fill out our SBP-2 page tables; split up the large buffer */
- sg_count = 0;
- sg_len = scsi_request_bufflen;
- sg_addr = cmd->cmd_dma;
- while (sg_len) {
- sg_element[sg_count].segment_base_lo = sg_addr;
- if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) {
- sg_element[sg_count].length_segment_base_hi =
-
PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH);
- sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH;
- sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH;
- } else {
- sg_element[sg_count].length_segment_base_hi =
- PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len);
- sg_len = 0;
- }
- sg_count++;
- }
-
- orb->misc |= ORB_SET_DATA_SIZE(sg_count);
-
- sbp2util_cpu_to_be32_buffer(sg_element,
- (sizeof(struct sbp2_unrestricted_page_table)) *
- sg_count);
- }
-}
-
static void sbp2_create_command_orb(struct sbp2_lu *lu,
struct sbp2_command_info *cmd,
unchar *scsi_cmd,
@@ -1594,13 +1531,9 @@ static void sbp2_create_command_orb(struct sbp2_lu *lu,
orb->data_descriptor_hi = 0x0;
orb->data_descriptor_lo = 0x0;
orb->misc |= ORB_SET_DIRECTION(1);
- } else if (scsi_use_sg)
+ } else
sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_use_sg, sgpnt,
orb_direction, dma_dir);
- else
- sbp2_prep_command_orb_no_sg(orb, hi, cmd, sgpnt, orb_direction,
- scsi_request_bufflen,
- scsi_request_buffer, dma_dir);
sbp2util_cpu_to_be32_buffer(orb, sizeof(*orb));
@@ -1689,15 +1622,15 @@ static int sbp2_send_command(struct sbp2_lu *lu, struct
scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
unchar *scsi_cmd = (unchar *)SCpnt->cmnd;
- unsigned int request_bufflen = SCpnt->request_bufflen;
+ unsigned int request_bufflen = scsi_bufflen(SCpnt);
struct sbp2_command_info *cmd;
cmd = sbp2util_allocate_command_orb(lu, SCpnt, done);
if (!cmd)
return -EIO;
- sbp2_create_command_orb(lu, cmd, scsi_cmd, SCpnt->use_sg,
- request_bufflen, SCpnt->request_buffer,
+ sbp2_create_command_orb(lu, cmd, scsi_cmd, scsi_sg_count(SCpnt),
+ request_bufflen, scsi_sglist(SCpnt),
SCpnt->sc_data_direction);
sbp2_link_orb_command(lu, cmd);
--
1.4.4.3
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
