This converts lpfc to use the data buffer accessors.
Signed-off-by: FUJITA Tomonori <[EMAIL PROTECTED]>
---
drivers/scsi/lpfc/lpfc_scsi.c | 55 ++++++++++++++++++----------------------
1 files changed, 25 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 4ffaa79..96120ec 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -175,7 +175,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
dma_addr_t physaddr;
uint32_t i, num_bde = 0;
- int datadir = scsi_cmnd->sc_data_direction;
+ int nseg, datadir = scsi_cmnd->sc_data_direction;
/*
* There are three possibilities here - use scatter-gather segment, use
@@ -184,26 +184,22 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *
* data bde entry.
*/
bpl += 2;
- if (scsi_cmnd->use_sg) {
+ nseg = scsi_dma_map(&phba->pcidev->dev, scsi_cmnd);
+ if (nseg > 0) {
/*
* The driver stores the segment count returned from pci_map_sg
* because this a count of dma-mappings used to map the use_sg
* pages. They are not guaranteed to be the same for those
* architectures that implement an IOMMU.
*/
- sgel = (struct scatterlist *)scsi_cmnd->request_buffer;
- lpfc_cmd->seg_cnt = dma_map_sg(&phba->pcidev->dev, sgel,
- scsi_cmnd->use_sg, datadir);
- if (lpfc_cmd->seg_cnt == 0)
- return 1;
+ lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
printk(KERN_ERR "%s: Too many sg segments from "
"dma_map_sg. Config %d, seg_cnt %d",
__FUNCTION__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
- dma_unmap_sg(&phba->pcidev->dev, sgel,
- lpfc_cmd->seg_cnt, datadir);
+ scsi_dma_unmap(&phba->pcidev->dev, scsi_cmnd);
return 1;
}
@@ -213,7 +209,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *
* single scsi command. Just run through the seg_cnt and format
* the bde's.
*/
- for (i = 0; i < lpfc_cmd->seg_cnt; i++) {
+ scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) {
physaddr = sg_dma_address(sgel);
bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
@@ -224,10 +220,10 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *
bpl->tus.f.bdeFlags = BUFF_USE_RCV;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
- sgel++;
num_bde++;
}
- }
+ } else if (nseg < 0)
+ return 1;
/*
* Finish initializing those IOCB fields that are dependent on the
@@ -240,7 +236,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *
(num_bde * sizeof (struct ulp_bde64));
iocb_cmd->ulpBdeCount = 1;
iocb_cmd->ulpLe = 1;
- fcp_cmnd->fcpDl = be32_to_cpu(scsi_cmnd->request_bufflen);
+ fcp_cmnd->fcpDl = be32_to_cpu(scsi_bufflen(scsi_cmnd));
return 0;
}
@@ -253,9 +249,8 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba
* a request buffer, but did not request use_sg. There is a third
* case, but it does not require resource deallocation.
*/
- if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg))
- dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
- psb->seg_cnt, psb->pCmd->sc_data_direction);
+ if (psb->seg_cnt > 0)
+ scsi_dma_unmap(&phba->pcidev->dev, psb->pCmd);
}
static void
@@ -316,14 +311,14 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
}
}
- cmnd->resid = 0;
+ scsi_resid(cmnd) = 0;
if (resp_info & RESID_UNDER) {
- cmnd->resid = be32_to_cpu(fcprsp->rspResId);
+ scsi_resid(cmnd) = be32_to_cpu(fcprsp->rspResId);
lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
"%d:0716 FCP Read Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n", phba->brd_no,
- be32_to_cpu(fcpcmd->fcpDl), cmnd->resid,
+ be32_to_cpu(fcpcmd->fcpDl), scsi_resid(cmnd),
fcpi_parm, cmnd->cmnd[0], cmnd->underflow);
/*
@@ -333,15 +328,15 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
*/
if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
fcpi_parm &&
- (cmnd->resid != fcpi_parm)) {
+ (scsi_resid(cmnd) != fcpi_parm)) {
lpfc_printf_log(phba, KERN_WARNING,
LOG_FCP | LOG_FCP_ERROR,
"%d:0735 FCP Read Check Error and Underrun "
"Data: x%x x%x x%x x%x\n", phba->brd_no,
be32_to_cpu(fcpcmd->fcpDl),
- cmnd->resid,
+ scsi_resid(cmnd),
fcpi_parm, cmnd->cmnd[0]);
- cmnd->resid = cmnd->request_bufflen;
+ scsi_resid(cmnd) = scsi_bufflen(cmnd);
host_status = DID_ERROR;
}
/*
@@ -352,13 +347,13 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
*/
if (!(resp_info & SNS_LEN_VALID) &&
(scsi_status == SAM_STAT_GOOD) &&
- (cmnd->request_bufflen - cmnd->resid) < cmnd->underflow) {
+ (scsi_bufflen(cmnd) - scsi_resid(cmnd) < cmnd->underflow)) {
lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
"%d:0717 FCP command x%x residual "
"underrun converted to error "
"Data: x%x x%x x%x\n", phba->brd_no,
- cmnd->cmnd[0], cmnd->request_bufflen,
- cmnd->resid, cmnd->underflow);
+ cmnd->cmnd[0], scsi_bufflen(cmnd),
+ scsi_resid(cmnd), cmnd->underflow);
host_status = DID_ERROR;
}
@@ -367,7 +362,7 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
"%d:0720 FCP command x%x residual "
"overrun error. Data: x%x x%x \n",
phba->brd_no, cmnd->cmnd[0],
- cmnd->request_bufflen, cmnd->resid);
+ scsi_bufflen(cmnd), scsi_resid(cmnd));
host_status = DID_ERROR;
/*
@@ -383,7 +378,7 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
be32_to_cpu(fcprsp->rspResId),
fcpi_parm, cmnd->cmnd[0]);
host_status = DID_ERROR;
- cmnd->resid = cmnd->request_bufflen;
+ scsi_resid(cmnd) = scsi_bufflen(cmnd);
}
out:
@@ -450,7 +445,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba
"SNS x%x x%x Data: x%x x%x\n",
phba->brd_no, cmd->device->id,
cmd->device->lun, cmd, cmd->result,
- *lp, *(lp + 3), cmd->retries, cmd->resid);
+ *lp, *(lp + 3), cmd->retries, scsi_resid(cmd));
}
result = cmd->result;
@@ -559,7 +554,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_hba * ph
* bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
* data bde entry.
*/
- if (scsi_cmnd->use_sg) {
+ if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
iocb_cmd->un.fcpi.fcpi_parm = 0;
@@ -570,7 +565,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_hba * ph
iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
iocb_cmd->ulpPU = PARM_READ_CHECK;
iocb_cmd->un.fcpi.fcpi_parm =
- scsi_cmnd->request_bufflen;
+ scsi_bufflen(scsi_cmnd);
fcp_cmnd->fcpCntl3 = READ_DATA;
phba->fc4InputRequests++;
}
