The attached patch for scsi-misc-2.6 updates the 3ware 9000 driver:
- Fix dma mask setting to fallback to 32-bit if 64-bit fails.
- Add support for 9690SA controllers.
Signed-off-by: Adam Radford <[EMAIL PROTECTED]>
James, Please apply
Thanks!
-Adam
Note: The patch is attached as an attachment, and also included
in-line below. The below may have line-wrap issues since I'm pasting
into gmail.
diff -Naur scsi-misc-2.6/drivers/scsi/3w-9xxx.c
scsi-misc-2.6.new/drivers/scsi/3w-9xxx.c
--- scsi-misc-2.6/drivers/scsi/3w-9xxx.c 2007-07-20 12:50:30.000000000
-0700
+++ scsi-misc-2.6.new/drivers/scsi/3w-9xxx.c 2007-07-20 13:05:10.000000000
-0700
@@ -4,7 +4,7 @@
Written By: Adam Radford <[EMAIL PROTECTED]>
Modifications By: Tom Couch <[EMAIL PROTECTED]>
- Copyright (C) 2004-2006 Applied Micro Circuits Corporation.
+ Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -69,6 +69,8 @@
2.26.02.008 - Free irq handler in __twa_shutdown().
Serialize reset code.
Add support for 9650SE controllers.
+ 2.26.02.009 - Fix dma mask setting to fallback to 32-bit if 64-bit fails.
+ 2.26.02.010 - Add support for 9690SA controllers.
*/
#include <linux/module.h>
@@ -92,7 +94,7 @@
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.008"
+#define TW_DRIVER_VERSION "2.26.02.010"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
@@ -124,11 +126,11 @@
unsigned short *fw_on_ctlr_branch,
unsigned short *fw_on_ctlr_build,
u32 *init_connect_result);
-static void twa_load_sgl(TW_Command_Full *full_command_packet, int
request_id, dma_addr_t dma_handle, int length);
+static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full
*full_command_packet, int request_id, dma_addr_t dma_handle, int
length);
static int twa_poll_response(TW_Device_Extension *tw_dev, int
request_id, int seconds);
static int twa_poll_status_gone(TW_Device_Extension *tw_dev, u32
flag, int seconds);
static int twa_post_command_packet(TW_Device_Extension *tw_dev, int
request_id, char internal);
-static int twa_reset_device_extension(TW_Device_Extension *tw_dev,
int ioctl_reset);
+static int twa_reset_device_extension(TW_Device_Extension *tw_dev);
static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset);
static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int
request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg);
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension
*tw_dev, int request_id);
@@ -683,7 +685,7 @@
full_command_packet = &tw_ioctl->firmware_command;
/* Load request id and sglist for both command types */
- twa_load_sgl(full_command_packet, request_id, dma_handle,
data_buffer_length_adjusted);
+ twa_load_sgl(tw_dev, full_command_packet, request_id,
dma_handle,
data_buffer_length_adjusted);
memcpy(tw_dev->command_packet_virt[request_id],
&(tw_ioctl->firmware_command), sizeof(TW_Command_Full));
@@ -700,10 +702,10 @@
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING:
(0x%02X:0x%04X):
Character ioctl (0x%x) timed out, resetting card.\n",
- tw_dev->host->host_no, TW_DRIVER, 0xc,
+ tw_dev->host->host_no, TW_DRIVER, 0x37,
cmd);
retval = TW_IOCTL_ERROR_OS_EIO;
- twa_reset_device_extension(tw_dev, 1);
+ twa_reset_device_extension(tw_dev);
goto out3;
}
@@ -890,7 +892,9 @@
}
if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
- if ((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE)
||
(!test_bit(TW_IN_RESET, &tw_dev->flags)))
+ if (((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE)
&&
+ (tw_dev->tw_pci_dev->device !=
PCI_DEVICE_ID_3WARE_9690SA)) ||
+ (!test_bit(TW_IN_RESET, &tw_dev->flags)))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue
Error: clearing");
writel(TW_CONTROL_CLEAR_QUEUE_ERROR,
TW_CONTROL_REG_ADDR(tw_dev));
}
@@ -935,8 +939,7 @@
unsigned long before;
int retval = 1;
- if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) ||
- (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE)) {
+ if (tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9000) {
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) !=
TW_9550SX_DRAIN_COMPLETED) {
response_que_value =
readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
@@ -1195,7 +1198,6 @@
u32 status_reg_value;
TW_Response_Queue response_que;
TW_Command_Full *full_command_packet;
- TW_Command *command_packet;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
int handled = 0;
@@ -1273,7 +1275,6 @@
request_id = TW_RESID_OUT(response_que.response_id);
full_command_packet =
tw_dev->command_packet_virt[request_id];
error = 0;
- command_packet =
&full_command_packet->command.oldcommand;
/* Check for command packet errors */
if (full_command_packet->command.newcommand.status !=
0) {
if (tw_dev->srb[request_id] != 0) {
@@ -1352,11 +1353,15 @@
} /* End twa_interrupt() */
/* This function will load the request id and various sgls for ioctls */
-static void twa_load_sgl(TW_Command_Full *full_command_packet, int
request_id, dma_addr_t dma_handle, int length)
+static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full
*full_command_packet, int request_id, dma_addr_t dma_handle, int
length)
{
TW_Command *oldcommand;
TW_Command_Apache *newcommand;
TW_SG_Entry *sgl;
+ unsigned int pae = 0;
+
+ if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
+ pae = 1;
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved)
== TW_OP_EXECUTE_SCSI) {
newcommand = &full_command_packet->command.newcommand;
@@ -1372,12 +1377,14 @@
if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) {
/* Load the sg list */
- sgl = (TW_SG_Entry *)((u32
*)oldcommand+TW_SGL_OUT(oldcommand->opcode__sgloffset));
+ if (tw_dev->tw_pci_dev->device ==
PCI_DEVICE_ID_3WARE_9690SA)
+ sgl = (TW_SG_Entry *)((u32
*)oldcommand+oldcommand->size -
(sizeof(TW_SG_Entry)/4) + pae);
+ else
+ sgl = (TW_SG_Entry *)((u32
*)oldcommand+TW_SGL_OUT(oldcommand->opcode__sgloffset));
sgl->address = TW_CPU_TO_SGL(dma_handle +
sizeof(TW_Ioctl_Buf_Apache) - 1);
sgl->length = cpu_to_le32(length);
- if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
- oldcommand->size += 1;
+ oldcommand->size += pae;
}
}
} /* End twa_load_sgl() */
@@ -1506,7 +1513,8 @@
command_que_value = tw_dev->command_packet_phys[request_id];
/* For 9650SE write low 4 bytes first */
- if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
+ (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA)) {
command_que_value += TW_COMMAND_OFFSET;
writel((u32)command_que_value,
TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev));
}
@@ -1537,7 +1545,8 @@
TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
goto out;
} else {
- if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE)
||
+ (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA))
{
/* Now write upper 4 bytes */
writel((u32)((u64)command_que_value >> 32),
TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev) + 0x4);
} else {
@@ -1561,7 +1570,7 @@
} /* End twa_post_command_packet() */
/* This function will reset a device extension */
-static int twa_reset_device_extension(TW_Device_Extension *tw_dev,
int ioctl_reset)
+static int twa_reset_device_extension(TW_Device_Extension *tw_dev)
{
int i = 0;
int retval = 1;
@@ -1719,7 +1728,7 @@
mutex_lock(&tw_dev->ioctl_lock);
/* Now reset the card and some of the device extension data */
- if (twa_reset_device_extension(tw_dev, 0)) {
+ if (twa_reset_device_extension(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset
failed
during scsi host reset");
goto out;
}
@@ -2001,11 +2010,14 @@
pci_set_master(pdev);
- retval = pci_set_dma_mask(pdev, sizeof(dma_addr_t) > 4 ?
DMA_64BIT_MASK : DMA_32BIT_MASK);
- if (retval) {
- TW_PRINTK(host, TW_DRIVER, 0x23, "Failed to set dma mask");
- goto out_disable_device;
- }
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
+ || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
+ || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ TW_PRINTK(host, TW_DRIVER, 0x23, "Failed to set dma
mask");
+ retval = -ENODEV;
+ goto out_disable_device;
+ }
host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
if (!host) {
@@ -2053,7 +2065,8 @@
goto out_iounmap;
/* Set host specific parameters */
- if (pdev->device == PCI_DEVICE_ID_3WARE_9650SE)
+ if ((pdev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
+ (pdev->device == PCI_DEVICE_ID_3WARE_9690SA))
host->max_id = TW_MAX_UNITS_9650SE;
else
host->max_id = TW_MAX_UNITS;
@@ -2160,6 +2173,8 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9650SE,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9690SA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
MODULE_DEVICE_TABLE(pci, twa_pci_tbl);
diff -Naur scsi-misc-2.6/drivers/scsi/3w-9xxx.h
scsi-misc-2.6.new/drivers/scsi/3w-9xxx.h
--- scsi-misc-2.6/drivers/scsi/3w-9xxx.h 2007-07-08 16:32:17.000000000
-0700
+++ scsi-misc-2.6.new/drivers/scsi/3w-9xxx.h 2007-07-20 13:05:12.000000000
-0700
@@ -4,7 +4,7 @@
Written By: Adam Radford <[EMAIL PROTECTED]>
Modifications By: Tom Couch <[EMAIL PROTECTED]>
- Copyright (C) 2004-2006 Applied Micro Circuits Corporation.
+ Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -419,6 +419,9 @@
#ifndef PCI_DEVICE_ID_3WARE_9650SE
#define PCI_DEVICE_ID_3WARE_9650SE 0x1004
#endif
+#ifndef PCI_DEVICE_ID_3WARE_9690SA
+#define PCI_DEVICE_ID_3WARE_9690SA 0x1005
+#endif
/* Bitmask macros to eliminate bitfields */
diff -Naur scsi-misc-2.6/drivers/scsi/3w-9xxx.c scsi-misc-2.6.new/drivers/scsi/3w-9xxx.c
--- scsi-misc-2.6/drivers/scsi/3w-9xxx.c 2007-07-20 12:50:30.000000000 -0700
+++ scsi-misc-2.6.new/drivers/scsi/3w-9xxx.c 2007-07-20 13:05:10.000000000 -0700
@@ -4,7 +4,7 @@
Written By: Adam Radford <[EMAIL PROTECTED]>
Modifications By: Tom Couch <[EMAIL PROTECTED]>
- Copyright (C) 2004-2006 Applied Micro Circuits Corporation.
+ Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -69,6 +69,8 @@
2.26.02.008 - Free irq handler in __twa_shutdown().
Serialize reset code.
Add support for 9650SE controllers.
+ 2.26.02.009 - Fix dma mask setting to fallback to 32-bit if 64-bit fails.
+ 2.26.02.010 - Add support for 9690SA controllers.
*/
#include <linux/module.h>
@@ -92,7 +94,7 @@
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.008"
+#define TW_DRIVER_VERSION "2.26.02.010"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
@@ -124,11 +126,11 @@
unsigned short *fw_on_ctlr_branch,
unsigned short *fw_on_ctlr_build,
u32 *init_connect_result);
-static void twa_load_sgl(TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length);
+static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length);
static int twa_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds);
static int twa_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds);
static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id, char internal);
-static int twa_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset);
+static int twa_reset_device_extension(TW_Device_Extension *tw_dev);
static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset);
static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg);
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id);
@@ -683,7 +685,7 @@
full_command_packet = &tw_ioctl->firmware_command;
/* Load request id and sglist for both command types */
- twa_load_sgl(full_command_packet, request_id, dma_handle, data_buffer_length_adjusted);
+ twa_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted);
memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full));
@@ -700,10 +702,10 @@
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
- tw_dev->host->host_no, TW_DRIVER, 0xc,
+ tw_dev->host->host_no, TW_DRIVER, 0x37,
cmd);
retval = TW_IOCTL_ERROR_OS_EIO;
- twa_reset_device_extension(tw_dev, 1);
+ twa_reset_device_extension(tw_dev);
goto out3;
}
@@ -890,7 +892,9 @@
}
if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
- if ((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE) || (!test_bit(TW_IN_RESET, &tw_dev->flags)))
+ if (((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE) &&
+ (tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9690SA)) ||
+ (!test_bit(TW_IN_RESET, &tw_dev->flags)))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
}
@@ -935,8 +939,7 @@
unsigned long before;
int retval = 1;
- if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) ||
- (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE)) {
+ if (tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9000) {
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
@@ -1195,7 +1198,6 @@
u32 status_reg_value;
TW_Response_Queue response_que;
TW_Command_Full *full_command_packet;
- TW_Command *command_packet;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
int handled = 0;
@@ -1273,7 +1275,6 @@
request_id = TW_RESID_OUT(response_que.response_id);
full_command_packet = tw_dev->command_packet_virt[request_id];
error = 0;
- command_packet = &full_command_packet->command.oldcommand;
/* Check for command packet errors */
if (full_command_packet->command.newcommand.status != 0) {
if (tw_dev->srb[request_id] != 0) {
@@ -1352,11 +1353,15 @@
} /* End twa_interrupt() */
/* This function will load the request id and various sgls for ioctls */
-static void twa_load_sgl(TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length)
+static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length)
{
TW_Command *oldcommand;
TW_Command_Apache *newcommand;
TW_SG_Entry *sgl;
+ unsigned int pae = 0;
+
+ if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
+ pae = 1;
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
newcommand = &full_command_packet->command.newcommand;
@@ -1372,12 +1377,14 @@
if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) {
/* Load the sg list */
- sgl = (TW_SG_Entry *)((u32 *)oldcommand+TW_SGL_OUT(oldcommand->opcode__sgloffset));
+ if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA)
+ sgl = (TW_SG_Entry *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry)/4) + pae);
+ else
+ sgl = (TW_SG_Entry *)((u32 *)oldcommand+TW_SGL_OUT(oldcommand->opcode__sgloffset));
sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
sgl->length = cpu_to_le32(length);
- if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
- oldcommand->size += 1;
+ oldcommand->size += pae;
}
}
} /* End twa_load_sgl() */
@@ -1506,7 +1513,8 @@
command_que_value = tw_dev->command_packet_phys[request_id];
/* For 9650SE write low 4 bytes first */
- if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
+ (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA)) {
command_que_value += TW_COMMAND_OFFSET;
writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev));
}
@@ -1537,7 +1545,8 @@
TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
goto out;
} else {
- if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
+ (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA)) {
/* Now write upper 4 bytes */
writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev) + 0x4);
} else {
@@ -1561,7 +1570,7 @@
} /* End twa_post_command_packet() */
/* This function will reset a device extension */
-static int twa_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset)
+static int twa_reset_device_extension(TW_Device_Extension *tw_dev)
{
int i = 0;
int retval = 1;
@@ -1719,7 +1728,7 @@
mutex_lock(&tw_dev->ioctl_lock);
/* Now reset the card and some of the device extension data */
- if (twa_reset_device_extension(tw_dev, 0)) {
+ if (twa_reset_device_extension(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset");
goto out;
}
@@ -2001,11 +2010,14 @@
pci_set_master(pdev);
- retval = pci_set_dma_mask(pdev, sizeof(dma_addr_t) > 4 ? DMA_64BIT_MASK : DMA_32BIT_MASK);
- if (retval) {
- TW_PRINTK(host, TW_DRIVER, 0x23, "Failed to set dma mask");
- goto out_disable_device;
- }
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
+ || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
+ || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ TW_PRINTK(host, TW_DRIVER, 0x23, "Failed to set dma mask");
+ retval = -ENODEV;
+ goto out_disable_device;
+ }
host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
if (!host) {
@@ -2053,7 +2065,8 @@
goto out_iounmap;
/* Set host specific parameters */
- if (pdev->device == PCI_DEVICE_ID_3WARE_9650SE)
+ if ((pdev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
+ (pdev->device == PCI_DEVICE_ID_3WARE_9690SA))
host->max_id = TW_MAX_UNITS_9650SE;
else
host->max_id = TW_MAX_UNITS;
@@ -2160,6 +2173,8 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9650SE,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9690SA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
MODULE_DEVICE_TABLE(pci, twa_pci_tbl);
diff -Naur scsi-misc-2.6/drivers/scsi/3w-9xxx.h scsi-misc-2.6.new/drivers/scsi/3w-9xxx.h
--- scsi-misc-2.6/drivers/scsi/3w-9xxx.h 2007-07-08 16:32:17.000000000 -0700
+++ scsi-misc-2.6.new/drivers/scsi/3w-9xxx.h 2007-07-20 13:05:12.000000000 -0700
@@ -4,7 +4,7 @@
Written By: Adam Radford <[EMAIL PROTECTED]>
Modifications By: Tom Couch <[EMAIL PROTECTED]>
- Copyright (C) 2004-2006 Applied Micro Circuits Corporation.
+ Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -419,6 +419,9 @@
#ifndef PCI_DEVICE_ID_3WARE_9650SE
#define PCI_DEVICE_ID_3WARE_9650SE 0x1004
#endif
+#ifndef PCI_DEVICE_ID_3WARE_9690SA
+#define PCI_DEVICE_ID_3WARE_9690SA 0x1005
+#endif
/* Bitmask macros to eliminate bitfields */
