Subject: [PATCH] scsi: Update Aic94xx SAS/SATA Linux open source device
driver to fix smartctl utility problem.
Contribution:
Gilbert Wu <[EMAIL PROTECTED]>
Change Log:
1. Fixed the problem that "smartctl -a /dev/some_sata_disk -d ata"
does not work on aic94xx device drive with SATA devices.
The smartctl utility send down ATA smart command to aic94xx
driver and fail to get the result which is stored on ATA output
register.
In normal case, Aic94xx’s firmware does not return the value of
ATA output register to device driver due to performance reason.
To solve this issue then the driver need to turn on internal
flag (CSMI_TASK) for particular ATA command to enable firmware
to return the value of ATA output register.
Patch: apply to aic94xx-sas-2.6.git development tree
Signed-off-by: Gilbert Wu <[EMAIL PROTECTED]>
diff -urN old/drivers/scsi/aic94xx/aic94xx_task.c
new/drivers/scsi/aic94xx/aic94xx_task.c
--- old/drivers/scsi/aic94xx/aic94xx_task.c 2007-08-30 16:32:12.000000000
-0700
+++ new/drivers/scsi/aic94xx/aic94xx_task.c 2007-08-30 16:31:50.000000000
-0700
@@ -33,6 +33,11 @@
static void asd_unbuild_smp_ascb(struct asd_ascb *a);
static void asd_unbuild_ssp_ascb(struct asd_ascb *a);
+#define ATA_SMART_COMMAND 0xb0
+#define ATA_DEVICE_DIAGNOSTIC 0x90
+#define ATA_CHECK_POWER_MODE 0xe5
+#define ATA_SMART_STATUS 0xda
+
static inline void asd_can_dequeue(struct asd_ha_struct *asd_ha, int num)
{
unsigned long flags;
@@ -253,6 +258,7 @@
break;
case TC_SSP_RESP:
case TC_ATA_RESP:
+ case TC_CSMI:
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_PROTO_RESPONSE;
asd_get_response_tasklet(ascb, dl);
@@ -427,6 +433,15 @@
flags |= STP_AFFIL_POLICY;
scb->ata_task.flags = flags;
}
+
+ if ((scb->ata_task.fis.command == ATA_SMART_COMMAND &&
+ scb->ata_task.fis.features == ATA_SMART_STATUS)
+ || scb->ata_task.fis.command == ATA_DEVICE_DIAGNOSTIC
+ || scb->ata_task.fis.command == ATA_CHECK_POWER_MODE)
+ {
+ scb->ata_task.ata_flags|=CSMI_TASK;
+ }
+
ascb->tasklet_complete = asd_task_tasklet_complete;
if (likely(!task->ata_task.device_control_reg_update))
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
