As per SAT (sans removable devices)...
commit 09d9637c413406cf63f0e1efb364411ac8a9243c
Author: Jeff Garzik <[EMAIL PROTECTED]>
Date: Fri Sep 21 07:09:36 2007 -0400
[libata] SCSI: simple TEST UNIT READY simulation
It's trivial to ping the device, and that's a much more sane behavior
than no-op.
Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]>
drivers/ata/libata-scsi.c | 62 ++++++++++++++++++++++++++++++++++------------
1 file changed, 46 insertions(+), 16 deletions(-)
09d9637c413406cf63f0e1efb364411ac8a9243c
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index dbe8ac3..456b75f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -906,6 +906,29 @@ static void ata_delayed_done(struct scsi_cmnd *scmd)
}
/**
+ * ata_scsi_tur_xlat - Translate SCSI TEST UNIT READY command
+ * @qc: Storage for translated ATA taskfile
+ *
+ * Simulates a TEST UNIT READY command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+static unsigned int ata_scsi_tur_xlat(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+
+ tf->flags |= ATA_TFLAG_DEVICE;
+ tf->protocol = ATA_PROT_NODATA;
+ tf->command = ATA_CMD_CHK_POWER;
+
+ return 0;
+}
+
+/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
*
@@ -1376,6 +1399,12 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd
*qc)
}
}
+ /* For TEST UNIT READY failures, we are told to respond with
+ * NOT READY / LOGICAL UNIT DOES NOT RESPOND TO SELECTION
+ */
+ if ((cdb[0] == TEST_UNIT_READY) && need_sense)
+ ata_scsi_set_sense(cmd, NOT_READY, 0x05, 0x00);
+
/* For ATA pass thru (SAT) commands, generate a sense block if
* user mandated it or if there's an error. Note that if we
* generate because the user forced us to, a check condition
@@ -1383,22 +1412,21 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd
*qc)
* whether the command completed successfully or not. If there
* was no error, SK, ASC and ASCQ will all be zero.
*/
- if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
- ((cdb[2] & 0x20) || need_sense)) {
+ else if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
+ ((cdb[2] & 0x20) || need_sense))
ata_gen_passthru_sense(qc);
- } else {
- if (!need_sense) {
- cmd->result = SAM_STAT_GOOD;
- } else {
- /* TODO: decide which descriptor format to use
- * for 48b LBA devices and call that here
- * instead of the fixed desc, which is only
- * good for smaller LBA (and maybe CHS?)
- * devices.
- */
- ata_gen_ata_sense(qc);
- }
- }
+
+ else if (need_sense)
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_ata_sense(qc);
+
+ else
+ cmd->result = SAM_STAT_GOOD;
/* XXX: track spindown state for spindown skipping and warning */
if (unlikely(qc->tf.command == ATA_CMD_STANDBY ||
@@ -2780,6 +2808,9 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct
ata_device *dev, u8 cmd)
case START_STOP:
return ata_scsi_start_stop_xlat;
+
+ case TEST_UNIT_READY:
+ return ata_scsi_tur_xlat;
}
return NULL;
@@ -2935,7 +2966,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct
scsi_cmnd *cmd,
case REZERO_UNIT:
case SEEK_6:
case SEEK_10:
- case TEST_UNIT_READY:
case FORMAT_UNIT: /* FIXME: correct? */
ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
break;
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
