On Sun, Oct 21 2007 at 18:19 +0200, James Bottomley <[EMAIL PROTECTED]> wrote:
> On Fri, 2007-10-19 at 10:32 +0200, Hannes Reinecke wrote:
>> The patch enables support for 16-bit CDBs in aic7xxx and aic79xx.
>> aic7xxx can actually support up to 32-bit CDBs, should they ever see
>> the light of day.
>>
>> Signed-off-by: Hannes Reinecke <[EMAIL PROTECTED]>
>> ---
>> drivers/scsi/aic7xxx/aic79xx.h | 2 ++
>> drivers/scsi/aic7xxx/aic79xx_osm.c | 1 +
>> drivers/scsi/aic7xxx/aic7xxx_osm.c | 1 +
>> 3 files changed, 4 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
>> index ce638aa..883f26a 100644
>> --- a/drivers/scsi/aic7xxx/aic79xx.h
>> +++ b/drivers/scsi/aic7xxx/aic79xx.h
>> @@ -413,6 +413,8 @@ struct target_status {
>> * the sense buffer address in the SCB. This allows
>> * us to retrieve sense information without interrupting
>> * the host in packetized mode.
>> + * The current firmware relies on a CDB len of 16, so
>> + * don't change it unless you know what you're doing.
>> */
>> typedef uint32_t sense_addr_t;
>> #define MAX_CDB_LEN 16
>> diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c
>> b/drivers/scsi/aic7xxx/aic79xx_osm.c
>> index 2d02040..f4e12e1 100644
>> --- a/drivers/scsi/aic7xxx/aic79xx_osm.c
>> +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
>> @@ -1090,6 +1090,7 @@ ahd_linux_register_host(struct ahd_softc *ahd, struct
>> scsi_host_template *templa
>> host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
>> host->max_lun = AHD_NUM_LUNS;
>> host->max_channel = 0;
>> + host->max_cmd_len = 16;
>
> Actually, the aic79xx doc we now have through the LF NDA programme says
> that the 79xx can also go up to 32 byte CDBs.
>
>> host->sg_tablesize = AHD_NSEG;
>> ahd_lock(ahd, &s);
>> ahd_set_unit(ahd, ahd_linux_unit++);
>> diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c
>> b/drivers/scsi/aic7xxx/aic7xxx_osm.c
>> index 390b0fc..d488764 100644
>> --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
>> +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
>> @@ -1048,6 +1048,7 @@ ahc_linux_register_host(struct ahc_softc *ahc, struct
>> scsi_host_template *templa
>> host->max_id = (ahc->features & AHC_WIDE) ? 16 : 8;
>> host->max_lun = AHC_NUM_LUNS;
>> host->max_channel = (ahc->features & AHC_TWIN) ? 1 : 0;
>> + host->max_cmd_len = 32;
>> host->sg_tablesize = AHC_NSEG;
>> ahc_lock(ahc, &s);
>> ahc_set_unit(ahc, ahc_linux_unit++);
>
> But, I suppose the main point is: is this really necessary? The
> default, when unspecified, is 16 bytes and the mid-layer can't deliver
> anything larger. I would anticipate the large CDB infrastructure will
> have some separate enabling, so why not simply do nothing until that
> gets merged?
>
> James
I'm about to finish an RFC patchset for the extended commands.
I have implemented a more aggressive approach than the one
I've been sending for the last year.
(Matthew I have an extra 8-bytes save to scsi_cmnd on
64bit and 12 bytes for 32bit. Guess how? ;))
>From what I have now, (And also the old patch sets) host->max_cmd_len serves
>the same
function, Limit the command size sent by the mid-layer. Even more so with the
support
of extended commands.
So I recommend this patch.
If a driver does not have internal fixed-sized buffers to store the CDB than
setting of host->max_cmd_len, and use of cmnd->cmd_len will be enough to support
extended CDB's.
Boaz
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
