On Tue, 10 Jul 2012, Jon Mason wrote:
The PCIE capability offset is saved during PCI bus walking. It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it. Also, pci_is_pcie is a
better way of determining if the device is PCIE or not (as it uses the
same saved PCIE capability offset).
Signed-off-by: Jon Mason <jdma...@kudzu.us>
Cc: Andrew Vasquez <andrew.vasq...@qlogic.com>
Cc: linux-dri...@qlogic.com
---
drivers/scsi/qla2xxx/qla_init.c | 4 ++--
drivers/scsi/qla2xxx/qla_nx.c | 4 ++--
drivers/scsi/qla2xxx/qla_os.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index ca50847..a44653b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -685,7 +685,7 @@ qla24xx_pci_config(scsi_qla_host_t *vha)
pcix_set_mmrbc(ha->pdev, 2048);
/* PCIe -- adjust Maximum Read Request Size (2048). */
- if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+ if (pci_is_pcie(ha->pdev))
pcie_set_readrq(ha->pdev, 2048);
pci_disable_rom(ha->pdev);
@@ -721,7 +721,7 @@ qla25xx_pci_config(scsi_qla_host_t *vha)
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
/* PCIe -- adjust Maximum Read Request Size (2048). */
- if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+ if (pci_is_pcie(ha->pdev))
pcie_set_readrq(ha->pdev, 2048);
pci_disable_rom(ha->pdev);
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index caf627b..9ce3a8f 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1620,7 +1620,7 @@ qla82xx_pci_info_str(struct scsi_qla_host *vha, char *str)
char lwstr[6];
uint16_t lnk;
- pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ pcie_reg = pci_pcie_cap(ha->pdev);
pci_read_config_word(ha->pdev, pcie_reg + PCI_EXP_LNKSTA, &lnk);
ha->link_width = (lnk >> 4) & 0x3f;
@@ -2528,7 +2528,7 @@ qla82xx_start_firmware(scsi_qla_host_t *vha)
}
/* Negotiated Link width */
- pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ pcie_cap = pci_pcie_cap(ha->pdev);
pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk);
ha->link_width = (lnk >> 4) & 0x3f;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 6d1d873..fb8cd38 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -482,12 +482,12 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
uint32_t pci_bus;
int pcie_reg;
- pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ pcie_reg = pci_pcie_cap(ha->pdev);
if (pcie_reg) {
char lwstr[6];
uint16_t pcie_lstat, lspeed, lwidth;
- pcie_reg += 0x12;
+ pcie_reg += PCI_EXP_LNKCAP;
pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
lwidth = (pcie_lstat &
Looks good, thanks.
Acked-by: Chad Dupuis <chad.dup...@qlogic.com>
This message and any attached documents contain information from QLogic
Corporation or its wholly-owned subsidiaries that may be confidential. If you
are not the intended recipient, you may not read, copy, distribute, or use this
information. If you have received this transmission in error, please notify the
sender immediately by reply e-mail and then delete this message.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
