Hi James,
Please apply the following patches to the scsi tree at your earliest
convenience.
Thanks,
Chad
Andrew Vasquez (2):
qla2xxx: Ensure PLOGI is sent to Fabric Management-Server upon
request.
qla2xxx: Fail initialization if unable to load RISC code.
Arun Easi (5):
qla2xxx: Fix for continuous rescan attempts in arbitrated loop
topology.
qla2xxx: Use #defines instead of hardcoded values for intr status.
qla2xxx: T10 DIF - ISP83xx changes.
qla2xxx: Fix incorrect status reporting on DIF errors.
qla2xxx: Use the right field for container_of.
Atul Deshmukh (1):
qla2xxx: Wrong PCIe(2.5Gb/s x8) speed in the kerenel message for
ISP82xx.
Chad Dupuis (12):
qla2xxx: Bind to ISP8031 devices.
qla2xxx: Add check in qla82xx_watchdog for failed hardware state.
qla2xxx: Use bitmap to store loop_id's for fcports.
qla2xxx: Changes for ISP83xx loopback support.
qla2xxx: Update the driver license.
qla2xxx: Only enable link up on the correct interrupt event.
qla2xxx: Implement beacon support for ISP83xx.
qla2xxx: Remove setting Scsi_host->this_id during adapter probe.
qla2xxx: Fix description of qla2xmaxqdepth parameter.
qla2xxx: Fix for handling some error conditions in loopback.
qla2xxx: Set Maximum Read Request Size to 4K.
qla2xxx: Update version number to 8.04.00.07-k.
Giridhar Malavali (4):
qla2xxx: Don't register to legacy interrupt for ISP82xx.
qla2xxx: Fix for legacy interrupts for ISP83xx.
qla2xxx: Don't toggle RISC interrupt bits after IRQ lines are
attached.
qla2xxx: Allow MSI interrupt registration for ISP82xx.
Harish Zunjarrao (1):
qla2xxx: Add FW DUMP SIZE sysfs attribute.
Joe Carnuccio (3):
qla2xxx: Add I2C BSG interface.
qla2xxx: Add bit to identify adapters for thermal temp.
qla2xxx: Do PCI fundamental reset for ISP83xx
Masanari Iida (1):
qla2xxx: Fix typo in qla2xxx files
Santosh Vernekar (2):
qla2xxx: IDC implementation for ISP83xx.
qla2xxx: Perform ROM mbx cmd access only after ISP soft-reset during
f/w recovery.
Saurav Kashyap (11):
qla2xxx: Display mailbox failure by default.
qla2xxx: Implementation of bidirectional.
qla2xxx: Implemetation of mctp.
qla2xxx: Fix rval may be used uninitialized in this function warning.
qla2xxx: Dont call nic restart firmware if it is already active and
running.
qla2xxx: Do not restrict the number of NPIV ports for ISP83xx.
qla2xxx: set idc version if function is first one to come.
qla2xxx: Enclose adapter related calls in adapter check in failed
state handler.
qla2xxx: Get fcal position map should not be called for p2p topology.
qla2xxx: Enable fw attributes for ISP24xx and above.
qla2xxx: Restrict nic core reset to one function for mctp.
Documentation/scsi/LICENSE.qla2xxx | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 145 ++++++-
drivers/scsi/qla2xxx/qla_bsg.c | 376 +++++++++++++++--
drivers/scsi/qla2xxx/qla_bsg.h | 30 ++-
drivers/scsi/qla2xxx/qla_dbg.c | 29 +-
drivers/scsi/qla2xxx/qla_dbg.h | 2 +-
drivers/scsi/qla2xxx/qla_def.h | 166 +++++++-
drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 49 ++-
drivers/scsi/qla2xxx/qla_gbl.h | 39 ++-
drivers/scsi/qla2xxx/qla_gs.c | 4 +-
drivers/scsi/qla2xxx/qla_init.c | 562 ++++++++++++++++++++++----
drivers/scsi/qla2xxx/qla_inline.h | 28 ++-
drivers/scsi/qla2xxx/qla_iocb.c | 261 ++++++++++--
drivers/scsi/qla2xxx/qla_isr.c | 437 ++++++++++++++++++---
drivers/scsi/qla2xxx/qla_mbx.c | 224 +++++++++-
drivers/scsi/qla2xxx/qla_mid.c | 5 +-
drivers/scsi/qla2xxx/qla_nx.c | 153 ++++----
drivers/scsi/qla2xxx/qla_nx.h | 17 +-
drivers/scsi/qla2xxx/qla_os.c | 767 +++++++++++++++++++++++++++++++++--
drivers/scsi/qla2xxx/qla_settings.h | 2 +-
drivers/scsi/qla2xxx/qla_sup.c | 67 +++-
drivers/scsi/qla2xxx/qla_version.h | 6 +-
23 files changed, 2957 insertions(+), 416 deletions(-)
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
