https://bugzilla.kernel.org/show_bug.cgi?id=47781
Reartes Guillermo <rtgui...@gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |rtgui...@gmail.com
--- Comment #5 from Reartes Guillermo <rtgui...@gmail.com> 2012-09-23 21:54:09
---
Controller #1:
<<<< SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller
[AHCI mode] [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0]) >>>
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 45
ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 45
ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 45
ata4: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 45
Controller #2:
<<< SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller
[197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) >>>
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m8192@0xf87fe000 port 0xf87fe100 irq 17
ata6: SATA max UDMA/133 abar m8192@0xf87fe000 port 0xf87fe180 irq 17
Controller #3:
<<< IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller
[8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) >>>
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi6 : ata_piix
scsi7 : ata_piix
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Controller #4 (PATA, SAME CARD as #2):
<<< IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller
[197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) >>>
pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:02:00.1: setting latency timer to 64
scsi8 : pata_acpi
scsi9 : pata_acpi
ata9: PATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 18
ata10: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 18
ERRORS:
* ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
* ata2.00: unsupported device, disabling
* ata10: prereset failed (errno=-19)
ata10: reset failed, giving up
WARNINGS:
* WARNING#1: (For ATA6 & ATA7)
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it
with 'pcie_aspm=force'
* WARNING#2:
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
* WARNING#3:
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
ata2: SATA link down (SStatus 0 SControl 300)
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050002 action 0xe frozen
ata2: irq_stat 0x00000040, connection status changed
ata2: SError: { RecovComm PHYRdyChg CommWake DevExch }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: unsupported device, disabling
ata2.00: disabled
ata2: EH complete
* WARNING#4:
ata10: prereset failed (errno=-19)
ata10: reset failed, giving up
* WARNING#5:
ACPI: Invalid Power Resource to register!
ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region
\_SB_.PCI0.SBRG.SIOR.HWRE 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it
instead of the native driver
ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region
\_SB_.PCI0.SBRG.GPIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it
instead of the native driver
------------------------------------------------
What device is attached to ata2 and ata10?
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
