Strings fragments coalesced by the compiler are
difficult to grep. Coalesce them instead.
Signed-off-by: Joe Perches <j...@perches.com>
---
drivers/scsi/BusLogic.c | 66 ++++++++++++++++++++++++-------------------------
1 file changed, 33 insertions(+), 33 deletions(-)
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 28c2051..bd588cf 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -141,7 +141,7 @@ static char *blogic_cmd_failure_reason;
static void blogic_announce_drvr(struct blogic_adapter *adapter)
{
blogic_announce("***** BusLogic SCSI Driver Version "
blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter);
- blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff "
"<l...@dandelion.com>\n", adapter);
+ blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff
<l...@dandelion.com>\n", adapter);
}
@@ -444,7 +444,7 @@ static int blogic_cmd(struct blogic_adapter *adapter, enum
blogic_opcode opcode,
goto done;
}
if (blogic_global_options.trace_config)
- blogic_notice("blogic_cmd(%02X) Status = %02X: "
"(Modify I/O Address)\n", adapter, opcode, statusreg.all);
+ blogic_notice("blogic_cmd(%02X) Status = %02X: (Modify
I/O Address)\n", adapter, opcode, statusreg.all);
result = 0;
goto done;
}
@@ -720,22 +720,22 @@ static int __init blogic_init_mm_probeinfo(struct
blogic_adapter *adapter)
pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
- blogic_err("BusLogic: Base Address0 0x%lX not I/O for "
"MultiMaster Host Adapter\n", NULL, base_addr0);
+ blogic_err("BusLogic: Base Address0 0x%lX not I/O for
MultiMaster Host Adapter\n", NULL, base_addr0);
blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
- blogic_err("BusLogic: Base Address1 0x%lX not Memory
for " "MultiMaster Host Adapter\n", NULL, base_addr1);
+ blogic_err("BusLogic: Base Address1 0x%lX not Memory
for MultiMaster Host Adapter\n", NULL, base_addr1);
blogic_err("at PCI Bus %d Device %d PCI Address
0x%lX\n", NULL, bus, device, pci_addr);
continue;
}
if (irq_ch == 0) {
- blogic_err("BusLogic: IRQ Channel %d invalid for "
"MultiMaster Host Adapter\n", NULL, irq_ch);
+ blogic_err("BusLogic: IRQ Channel %d invalid for
MultiMaster Host Adapter\n", NULL, irq_ch);
blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (blogic_global_options.trace_probe) {
- blogic_notice("BusLogic: PCI MultiMaster Host Adapter "
"detected at\n", NULL);
+ blogic_notice("BusLogic: PCI MultiMaster Host Adapter
detected at\n", NULL);
blogic_notice("BusLogic: PCI Bus %d Device %d I/O
Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
}
/*
@@ -822,7 +822,7 @@ static int __init blogic_init_mm_probeinfo(struct
blogic_adapter *adapter)
nonpr_mmcount++;
mmcount++;
} else
- blogic_warn("BusLogic: Too many Host Adapters "
"detected\n", NULL);
+ blogic_warn("BusLogic: Too many Host Adapters
detected\n", NULL);
}
/*
If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq."
@@ -960,22 +960,22 @@ static int __init blogic_init_fp_probeinfo(struct
blogic_adapter *adapter)
pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
#ifdef CONFIG_SCSI_FLASHPOINT
if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
- blogic_err("BusLogic: Base Address0 0x%lX not I/O for "
"FlashPoint Host Adapter\n", NULL, base_addr0);
+ blogic_err("BusLogic: Base Address0 0x%lX not I/O for
FlashPoint Host Adapter\n", NULL, base_addr0);
blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
- blogic_err("BusLogic: Base Address1 0x%lX not Memory
for " "FlashPoint Host Adapter\n", NULL, base_addr1);
+ blogic_err("BusLogic: Base Address1 0x%lX not Memory
for FlashPoint Host Adapter\n", NULL, base_addr1);
blogic_err("at PCI Bus %d Device %d PCI Address
0x%lX\n", NULL, bus, device, pci_addr);
continue;
}
if (irq_ch == 0) {
- blogic_err("BusLogic: IRQ Channel %d invalid for "
"FlashPoint Host Adapter\n", NULL, irq_ch);
+ blogic_err("BusLogic: IRQ Channel %d invalid for
FlashPoint Host Adapter\n", NULL, irq_ch);
blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (blogic_global_options.trace_probe) {
- blogic_notice("BusLogic: FlashPoint Host Adapter "
"detected at\n", NULL);
+ blogic_notice("BusLogic: FlashPoint Host Adapter
detected at\n", NULL);
blogic_notice("BusLogic: PCI Bus %d Device %d I/O
Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
}
if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
@@ -991,11 +991,11 @@ static int __init blogic_init_fp_probeinfo(struct
blogic_adapter *adapter)
probeinfo->pci_device = pci_dev_get(pci_device);
fpcount++;
} else
- blogic_warn("BusLogic: Too many Host Adapters "
"detected\n", NULL);
+ blogic_warn("BusLogic: Too many Host Adapters
detected\n", NULL);
#else
- blogic_err("BusLogic: FlashPoint Host Adapter detected at "
"PCI Bus %d Device %d\n", NULL, bus, device);
- blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq
%d, " "but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
- blogic_err("BusLogic: support was omitted in this kernel "
"configuration.\n", NULL);
+ blogic_err("BusLogic: FlashPoint Host Adapter detected at PCI
Bus %d Device %d\n", NULL, bus, device);
+ blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq
%d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
+ blogic_err("BusLogic: support was omitted in this kernel
configuration.\n", NULL);
#endif
}
/*
@@ -1936,10 +1936,10 @@ static bool __init blogic_reportconfig(struct
blogic_adapter *adapter)
blogic_info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", adapter,
discon_msg, tagq_msg);
if (blogic_multimaster_type(adapter)) {
- blogic_info(" Scatter/Gather Limit: %d of %d segments, "
"Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit,
adapter->mbox_count);
- blogic_info(" Driver Queue Depth: %d, " "Host Adapter Queue
Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth);
+ blogic_info(" Scatter/Gather Limit: %d of %d segments,
Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit,
adapter->mbox_count);
+ blogic_info(" Driver Queue Depth: %d, Host Adapter Queue
Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth);
} else
- blogic_info(" Driver Queue Depth: %d, " "Scatter/Gather Limit:
%d segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit);
+ blogic_info(" Driver Queue Depth: %d, Scatter/Gather Limit: %d
segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit);
blogic_info(" Tagged Queue Depth: ", adapter);
common_tagq_depth = true;
for (tgt_id = 1; tgt_id < adapter->maxdev; tgt_id++)
@@ -2719,7 +2719,7 @@ static void blogic_scan_inbox(struct blogic_adapter
*adapter)
then there is most likely a bug in
the Host Adapter firmware.
*/
- blogic_warn("Illegal CCB #%ld status %d in "
"Incoming Mailbox\n", adapter, ccb->serial, ccb->status);
+ blogic_warn("Illegal CCB #%ld status %d in
Incoming Mailbox\n", adapter, ccb->serial, ccb->status);
}
}
next_inbox->comp_code = BLOGIC_INBOX_FREE;
@@ -2754,7 +2754,7 @@ static void blogic_process_ccbs(struct blogic_adapter
*adapter)
if (ccb->opcode == BLOGIC_BDR) {
int tgt_id = ccb->tgt_id;
- blogic_warn("Bus Device Reset CCB #%ld to Target " "%d
Completed\n", adapter, ccb->serial, tgt_id);
+ blogic_warn("Bus Device Reset CCB #%ld to Target %d
Completed\n", adapter, ccb->serial, tgt_id);
blogic_inc_count(&adapter->tgt_stats[tgt_id].bdr_done);
adapter->tgt_flags[tgt_id].tagq_active = false;
adapter->cmds_since_rst[tgt_id] = 0;
@@ -2831,7 +2831,7 @@ static void blogic_process_ccbs(struct blogic_adapter
*adapter)
if (blogic_global_options.trace_err) {
int i;
blogic_notice("CCB #%ld Target
%d: Result %X Host "
- "Adapter Status
%02X " "Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id,
command->result, ccb->adapter_status, ccb->tgt_status);
+ "Adapter Status
%02X Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id, command->result,
ccb->adapter_status, ccb->tgt_status);
blogic_notice("CDB ",
adapter);
for (i = 0; i < ccb->cdblen;
i++)
blogic_notice(" %02X",
adapter, ccb->cdb[i]);
@@ -3197,12 +3197,12 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
*/
if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, ccb)) {
spin_unlock_irq(adapter->scsi_host->host_lock);
- blogic_warn("Unable to write Outgoing Mailbox - "
"Pausing for 1 second\n", adapter);
+ blogic_warn("Unable to write Outgoing Mailbox - Pausing
for 1 second\n", adapter);
blogic_delay(1);
spin_lock_irq(adapter->scsi_host->host_lock);
if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START,
ccb)) {
- blogic_warn("Still unable to write Outgoing
Mailbox - " "Host Adapter Dead?\n", adapter);
+ blogic_warn("Still unable to write Outgoing
Mailbox - Host Adapter Dead?\n", adapter);
blogic_dealloc_ccb(ccb);
command->result = DID_ERROR << 16;
command->scsi_done(command);
@@ -3437,8 +3437,8 @@ static int blogic_diskparam(struct scsi_device *sdev,
struct block_device *dev,
if (diskparam->cylinders != saved_cyl)
blogic_warn("Adopting Geometry %d/%d from
Partition Table\n", adapter, diskparam->heads, diskparam->sectors);
} else if (part_end_head > 0 || part_end_sector > 0) {
- blogic_warn("Warning: Partition Table appears to "
"have Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector);
- blogic_warn("not compatible with current BusLogic "
"Host Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors);
+ blogic_warn("Warning: Partition Table appears to have
Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector);
+ blogic_warn("not compatible with current BusLogic Host
Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors);
}
}
kfree(buf);
@@ -3696,7 +3696,7 @@ static int __init blogic_parseopts(char *options)
for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV;
tgt_id++) {
unsigned short qdepth =
simple_strtoul(options, &options, 0);
if (qdepth > BLOGIC_MAX_TAG_DEPTH) {
- blogic_err("BusLogic: Invalid
Driver Options " "(invalid Queue Depth %d)\n", NULL, qdepth);
+ blogic_err("BusLogic: Invalid
Driver Options (invalid Queue Depth %d)\n", NULL, qdepth);
return 0;
}
drvr_opts->qdepth[tgt_id] = qdepth;
@@ -3705,12 +3705,12 @@ static int __init blogic_parseopts(char *options)
else if (*options == ']')
break;
else {
- blogic_err("BusLogic: Invalid
Driver Options " "(',' or ']' expected at '%s')\n", NULL, options);
+ blogic_err("BusLogic: Invalid
Driver Options (',' or ']' expected at '%s')\n", NULL, options);
return 0;
}
}
if (*options != ']') {
- blogic_err("BusLogic: Invalid Driver
Options " "(']' expected at '%s')\n", NULL, options);
+ blogic_err("BusLogic: Invalid Driver
Options (']' expected at '%s')\n", NULL, options);
return 0;
} else
options++;
@@ -3718,7 +3718,7 @@ static int __init blogic_parseopts(char *options)
unsigned short qdepth = simple_strtoul(options,
&options, 0);
if (qdepth == 0 ||
qdepth > BLOGIC_MAX_TAG_DEPTH) {
- blogic_err("BusLogic: Invalid Driver
Options " "(invalid Queue Depth %d)\n", NULL, qdepth);
+ blogic_err("BusLogic: Invalid Driver
Options (invalid Queue Depth %d)\n", NULL, qdepth);
return 0;
}
drvr_opts->common_qdepth = qdepth;
@@ -3764,7 +3764,7 @@ static int __init blogic_parseopts(char *options)
unsigned short bus_settle_time =
simple_strtoul(options, &options, 0);
if (bus_settle_time > 5 * 60) {
- blogic_err("BusLogic: Invalid Driver
Options " "(invalid Bus Settle Time %d)\n", NULL, bus_settle_time);
+ blogic_err("BusLogic: Invalid Driver
Options (invalid Bus Settle Time %d)\n", NULL, bus_settle_time);
return 0;
}
drvr_opts->bus_settle_time = bus_settle_time;
@@ -3789,14 +3789,14 @@ static int __init blogic_parseopts(char *options)
if (*options == ',')
options++;
else if (*options != ';' && *options != '\0') {
- blogic_err("BusLogic: Unexpected Driver Option
'%s' " "ignored\n", NULL, options);
+ blogic_err("BusLogic: Unexpected Driver Option
'%s' ignored\n", NULL, options);
*options = '\0';
}
}
if (!(blogic_drvr_options_count == 0 ||
blogic_probeinfo_count == 0 ||
blogic_drvr_options_count == blogic_probeinfo_count)) {
- blogic_err("BusLogic: Invalid Driver Options " "(all or
no I/O Addresses must be specified)\n", NULL);
+ blogic_err("BusLogic: Invalid Driver Options (all or no
I/O Addresses must be specified)\n", NULL);
return 0;
}
/*
@@ -3851,7 +3851,7 @@ static int __init blogic_setup(char *str)
(void) get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] != 0) {
- blogic_err("BusLogic: Obsolete Command Line Entry " "Format
Ignored\n", NULL);
+ blogic_err("BusLogic: Obsolete Command Line Entry Format
Ignored\n", NULL);
return 0;
}
if (str == NULL || *str == '\0')
--
1.8.1.2.459.gbcd45b4.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
