IACTH(Interrupt aggregation counter threshold) value is allowed
up to 0x1F and current setting value is the maximum.
This value is related with NUTRS(max:0x20) of HCI's capability.
Considering HCI controller doesn't support the maximum, IACTH
setting should be adjusted with possible value.
For that, existing 'ufshcd_config_int_aggr' is split into two part
[reset, configure].
Signed-off-by: Seungwon Jeon <tgih....@samsung.com>
Reviewed-by: Subhash Jadavani <subha...@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 53 +++++++++++++++++++++-----------------------
drivers/scsi/ufs/ufshci.h | 4 +-
2 files changed, 27 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 6ff16c9..c90b88a 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -59,6 +59,9 @@
/* Expose the flag value from utp_upiu_query.value */
#define MASK_QUERY_UPIU_FLAG_LOC 0xFF
+/* Interrupt aggregation default timeout, unit: 40us */
+#define INT_AGGR_DEF_TO 0x02
+
enum {
UFSHCD_MAX_CHANNEL = 0,
UFSHCD_MAX_ID = 1,
@@ -94,12 +97,6 @@ enum {
UFSHCD_INT_CLEAR,
};
-/* Interrupt aggregation options */
-enum {
- INT_AGGR_RESET,
- INT_AGGR_CONFIG,
-};
-
#define ufshcd_set_eh_in_progress(h) \
(h->eh_flags |= UFSHCD_EH_IN_PROGRESS)
#define ufshcd_eh_in_progress(h) \
@@ -340,30 +337,30 @@ static inline bool ufshcd_is_exception_event(struct
utp_upiu_rsp *ucd_rsp_ptr)
}
/**
- * ufshcd_config_int_aggr - Configure interrupt aggregation values.
- * Currently there is no use case where we want to configure
- * interrupt aggregation dynamically. So to configure interrupt
- * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and
- * INT_AGGR_TIMEOUT_VALUE are used.
+ * ufshcd_reset_intr_aggr - Reset interrupt aggregation values.
* @hba: per adapter instance
- * @option: Interrupt aggregation option
*/
static inline void
-ufshcd_config_int_aggr(struct ufs_hba *hba, int option)
+ufshcd_reset_intr_aggr(struct ufs_hba *hba)
{
- switch (option) {
- case INT_AGGR_RESET:
- ufshcd_writel(hba, INT_AGGR_ENABLE |
- INT_AGGR_COUNTER_AND_TIMER_RESET,
- REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
- break;
- case INT_AGGR_CONFIG:
- ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE |
- INT_AGGR_COUNTER_THRESHOLD_VALUE |
- INT_AGGR_TIMEOUT_VALUE,
- REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
- break;
- }
+ ufshcd_writel(hba, INT_AGGR_ENABLE |
+ INT_AGGR_COUNTER_AND_TIMER_RESET,
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
+}
+
+/**
+ * ufshcd_config_intr_aggr - Configure interrupt aggregation values.
+ * @hba: per adapter instance
+ * @cnt: Interrupt aggregation counter threshold
+ * @tmout: Interrupt aggregation timeout value
+ */
+static inline void
+ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout)
+{
+ ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE |
+ INT_AGGR_COUNTER_THLD_VAL(cnt) |
+ INT_AGGR_TIMEOUT_VAL(tmout),
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
}
/**
@@ -1523,7 +1520,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba
*hba)
ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
/* Configure interrupt aggregation */
- ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
+ ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO);
/* Configure UTRL and UTMRL base address registers */
ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
@@ -1971,7 +1968,7 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
/* Reset interrupt aggregation counters */
if (int_aggr_reset)
- ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
+ ufshcd_reset_intr_aggr(hba);
}
/**
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index f1e1b74..739ae3a 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -226,8 +226,8 @@ enum {
#define MASK_UIC_COMMAND_RESULT 0xFF
-#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8)
-#define INT_AGGR_TIMEOUT_VALUE (0x02)
+#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8)
+#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0)
/* Interrupt disable masks */
enum {
