Hi James,
Please apply the following patches to the scsi tree, misc branch at your
earliest convenience.
Thanks,
~Saurav
Armen Baloyan (5):
qla2xxx: Print proper QLAFX00 product name at probe.
qla2xxx: Fix issue with not displaying node name after system reboot.
qla2xxx: Add logic to abort BSG commands for ISPFX00.
qla2xxx: Add changes to obtain ISPFX00 adapters product information
in accordance with firmware update.
qla2xxx: Replace a constant with a macro definition for
host->canqueue assigmnment.
Atul Deshmukh (1):
qla2xxx: Clear RISC INT reg only for an event and not always while
polling.
Chad Dupuis (7):
qla2xxx: Honor execute firmware failures.
qla2xxx: Add BPM support for ISP25xx.
Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when
driver resources are low."
qla2xxx: Refactor shutdown code so some functionality can be reused.
qla2xxx: Disable adapter when we encounter a PCI disconnect.
qla2xxx: Use the correct mailbox registers when acknowledging an IDC
request on ISP8044.
qla2xxx: Only complete dcbx_comp and lb_portup_comp for virtual port
index 0.
Joe Carnuccio (3):
qla2xxx: Correctly set mailboxes for extended init control block.
qla2xxx: Add BSG interface for read/write serdes register.
qla2xxx: Fix undefined behavior in call to snprintf().
Saurav Kashyap (3):
qla2xxx: Don't consider the drivers knocked out of IDC participation
for future reset recovery process.
qla2xxx: Adding MAINTAINERS for qla2xxx FC-SCSI driver
qla2xxx: Update the driver version to 8.06.00.12-k.
Sawan Chandak (3):
qla2xxx: Disable INTx interrupt for ISP82XX
qla2xxx: Use scnprintf() instead of snprintf() in the sysfs handlers.
qla2xxx: Reset nic_core_reset_owner on moving from COLD to READY for
ISP8044
MAINTAINERS | 3 +-
drivers/scsi/qla2xxx/qla_attr.c | 116 ++++++------
drivers/scsi/qla2xxx/qla_bsg.c | 44 +++++
drivers/scsi/qla2xxx/qla_bsg.h | 13 ++
drivers/scsi/qla2xxx/qla_dbg.c | 7 +-
drivers/scsi/qla2xxx/qla_def.h | 22 +--
drivers/scsi/qla2xxx/qla_gbl.h | 13 +-
drivers/scsi/qla2xxx/qla_init.c | 2 +
drivers/scsi/qla2xxx/qla_inline.h | 19 --
drivers/scsi/qla2xxx/qla_isr.c | 82 +++++++--
drivers/scsi/qla2xxx/qla_mbx.c | 73 +++++++-
drivers/scsi/qla2xxx/qla_mr.c | 39 +++-
drivers/scsi/qla2xxx/qla_mr.h | 12 +-
drivers/scsi/qla2xxx/qla_nx.c | 20 ++-
drivers/scsi/qla2xxx/qla_nx2.c | 25 ++--
drivers/scsi/qla2xxx/qla_os.c | 366 ++++++++++++++++++------------------
drivers/scsi/qla2xxx/qla_version.h | 2 +-
17 files changed, 534 insertions(+), 324 deletions(-)
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
