On 13-11-01 03:49 PM, [email protected] wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=64171
Bug ID: 64171
Summary: Block SCSI Generic Driver does not keep data
Product: SCSI Drivers
Version: 2.5
Kernel Version: 2.6.32.61
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: Other
Assignee: [email protected]
Reporter: [email protected]
Regression: No
Data written to any given file descriptor should be unique to that descriptor
and processor space. Currently, the BSG Driver does not keep this uniqueness.
As the attached simple program demonstrates, a SCSI Command queued to the
device in one process is dequeued by another process which has opened a handle
to the same device.
The attached file sends the simple SCSI "Test Unit Ready" command from the SCSI
Primary Command Spec. to the device using the BSG driver. As the program
demonstrates, the sg_io_v4.usr_ptr field, which is set in the "push" branch of
the program, is dequeued from the "pop" branch of the code.
I also tested this behavior on Fedora 19 and the bug exists there as well. F19
uses kernel 3.9.5.
Compile the attachment:
g++ -o <out> combined.cpp
Execute as follows:
sudo combined pop /dev/bsg/0:0:0:0 &
sudo combined push /dev/bsg/0:0:0:0
I ran this test on lk 3.11.6 and it also exhibits this
problem.
When the bsg driver was originally designed, if my memory is
correct, it did not have an asynchronous interface, so it
skipped the complexity of keeping a separate context for
each file handle within each device.
With the addition of the asynchronous interface, the lack of
file handle context is exposed by your simple test. I'm
pretty sure that parallel test programs could show that
synchronous SG_IO ioctls can also be tricked. For example:
send INQUIRYs continuously from one process, TURs from
another process to the same device. Then, once in a while,
I guess that they would pick up the other one's response.
As for fixing it, that seems like a lot of work. I'm busy with
the sg driver at the moment. The short term solution is to use
the sg driver instead of the bsg driver in cases like these
unless:
a) you want to do SCSI bidirectional commands
b) you want to send SCSI commands whose cdb is greater
that 16 bytes
Observation:
wc bsg.c bsg-lib.c
1117 2761 24144 bsg.c
232 797 6117 bsg-lib.c
1349 3558 30261 total
wc sg.c
2669 8327 72340 sg.c
Some of those sg.c lines are bloat and for backward compatibility
(to 1992); but not all of them!
The sg driver has problems which several people are looking at,
but not as fundamental as the one reported here.
Another random thought: if the bsg driver implemented O_EXCL
on its open()s [it just ignores it] then that would be one
mechanism that could be used to guard against what has been
observed.
Doug Gilbert
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
