On 14-01-03 10:40 AM, walt wrote:
> On 01/02/2014 11:15 AM, Sarah Sharp wrote:
>> On Tue, Dec 31, 2013 at 12:40:16PM -0800, walt wrote:
>>> On 12/18/2013 01:11 PM, Greg Kroah-Hartman wrote:
>>>> 3.12-stable review patch. If anyone has any objections, please let me
>>>> know.
>>>>
>>>> ------------------
>>>>
>>>> From: David Laight <david.lai...@aculab.com>
>>>>
>>>> commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e upstream.
>>>>
>>>> Section 4.11.7.1 of rev 1.0 of the xhci specification states that a link
>>>> TRB
>>>> can only occur at a boundary between underlying USB frames (512 bytes for
>>>> high speed devices).
>>>>
>>>> If this isn't done the USB frames aren't formatted correctly and, for
>>>> example,
>>>> the USB3 ethernet ax88179_178a card will stop sending...
>>>
>>>
>>> Unfortunately this patch causes a regression when copying large files to my
>>> outboard USB3 drive. (Nothing at all to do with networking.)
>
>> Do you have CONFIG_USB_DEBUG turned on for 3.13? If so, you should see
>> dmesg output from this statement shortly before your drive fails:
>>
>> if (num_trbs >= TRBS_PER_SEGMENT) {
>> xhci_err(xhci, "Too many fragments %d, max %d\n",
>> num_trbs, TRBS_PER_SEGMENT - 1);
>> return -ENOMEM;
>> }
>
> Well, the answers depend on whether the usb3 drive uses logical volumes or not
> (lvm2), which I can't explain. What I've described so far is with lvm2.
>
> When using lvm2 on the usb3 drive, turning on USB_DEBUG has *no* effect -- the
> console prints two or three lines stating that the ext4 journal has quit and
> the drive is remounted ro. That particular drive stays wedged until the next
> reboot, but no other ill effects to the system.
>
> OTOH, when I put a disk with just an ordinary ext4 partition in the usb3 dock,
> (no logical volumes) the copy failure becomes catastrophic, with kernel panic
> messages, leaving the system unresponsive and needing a hard reset to recover.
>
> I also tried your other suggestion:
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 4265b48..1a6a43d 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -4714,7 +4714,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
> xhci_get_quirks_t get_quirks)
> int retval;
>
> /* Accept arbitrarily long scatter-gather lists */
> - hcd->self.sg_tablesize = ~0;
> + hcd->self.sg_tablesize = 31;
>
> /* support to build packet from discontinuous buffers */
> hcd->self.no_sg_constraint = 1;
>
> Sadly it didn't fix the problem. Did I get the patch right?
That sounds almost as if the old version is still being loaded/run,
possibly from the initramfs image?
--
Mark Lord
Real-Time Remedies Inc.
ml...@pobox.com
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
