On Mon, 2014-02-10 at 18:18 +0300, Dan Carpenter wrote:
> The original code always set the upper 32 bits to zero because it was
> doing a shift of the wrong variable.
> 
> Fixes: 1a4f550a09f8 ('[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other 
> fixes')
> Signed-off-by: Dan Carpenter <[email protected]>
> ---
> v2: Add a cast to u64 to avoid a future static checker warning
> 
> diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c 
> b/drivers/scsi/arcmsr/arcmsr_hba.c
> index 4f6a30b8e5f9..9cfd399c47c0 100644
> --- a/drivers/scsi/arcmsr/arcmsr_hba.c
> +++ b/drivers/scsi/arcmsr/arcmsr_hba.c
> @@ -2500,16 +2500,15 @@ static int arcmsr_polling_ccbdone(struct 
> AdapterControlBlock *acb,
>  static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
>  {
>       uint32_t cdb_phyaddr, cdb_phyaddr_hi32;
> -     dma_addr_t dma_coherent_handle;
> +
>       /*
>       ********************************************************************
>       ** here we need to tell iop 331 our freeccb.HighPart
>       ** if freeccb.HighPart is not zero
>       ********************************************************************
>       */
> -     dma_coherent_handle = acb->dma_coherent_handle;
> -     cdb_phyaddr = (uint32_t)(dma_coherent_handle);
> -     cdb_phyaddr_hi32 = (uint32_t)((cdb_phyaddr >> 16) >> 16);
> +     cdb_phyaddr = (uint32_t)(acb->dma_coherent_handle);
> +     cdb_phyaddr_hi32 = (uint32_t)((u64)acb->dma_coherent_handle >> 32);

The original 16 >> 16 is better because there's no requirement to cast
to u64 and take an expensive 64 bit build out on 32 bits just to avoid
the warning.

There's actually a macro in kernel.h (upper_32_bits) that does this.

James

>       acb->cdb_phyaddr_hi32 = cdb_phyaddr_hi32;
>       /*
>       ***********************************************************************
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to