From: Chad Dupuis <[email protected]>
Hi James,
Please apply the following patches to the scsi tree, misc branch at your
earliest convenience. This patch set is a resubmission of a patch set we
had previously submitted plus three new patches and that this supersedes
what was posted in December.
Thanks,
~Saurav
Armen Baloyan (6):
qla2xxx: Add handling for boot indication progress AENs for ISPFX00.
qla2xxx: Replace constant value for IOCTL IOCB abort execution status
with a macro for ISPFX00.
qla2xxx: Remove Marker type IOCB logic for ISPFX00.
qla2xxx: Add changes in the IOCB structures to adjust driver source
codes to ISPFX00 firmware spec.
qla2xxx: Fix Task Management command asynchronous handling
qla2xxx: Add IOCB Abort command asynchronous handling.
Atul Deshmukh (2):
qla2xxx: Use proper message for Non owner reset ACK Timeout.
qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from
watchdog function for ISP8044.
Chad Dupuis (6):
qla2xxx: Add mutex around optrom calls to serialize accesses.
qla2xxx: Set host can_queue value based on available resources.
scsi_transport_fc: Add 32Gbps speed definition.
qla2xxx: Add support for ISP2071.
qla2xxx: Read capture firmware dump on mailbox timeout for ISP8044
and ISP82XX.
qla2xxx: Fix multiqueue MSI-X registration.
Joe Carnuccio (1):
qla2xxx: Enable the Flash Access Control (FAC) mailbox command.
Saurav Kashyap (8):
qla2xxx: Remove init control block related dead code for ISPFX00.
qla2xxx: Select correct request queue for error type IOCB for
ISPFX00.
qla2xxx: Properly handle 32 bit mailbox register for ISPFX00.
qla2xxx: Avoid poisoning in the response queue for ISPFX00.
qla2xxx: Simplify the ISPFX00 interrupt handler code for ISPFX00.
qla2xxx: Correctly set the read_optrom pointer for ISP8044.
qla2xxx: Update the driver version to 8.07.00.02-k.
qla2xxx: Correct the port no assignment for ISP82XX.
drivers/scsi/qla2xxx/Makefile | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 193 +++++++-
drivers/scsi/qla2xxx/qla_bsg.c | 12 +-
drivers/scsi/qla2xxx/qla_dbg.c | 134 +++++-
drivers/scsi/qla2xxx/qla_dbg.h | 7 +
drivers/scsi/qla2xxx/qla_def.h | 65 ++--
drivers/scsi/qla2xxx/qla_dfs.c | 3 +-
drivers/scsi/qla2xxx/qla_fw.h | 4 +
drivers/scsi/qla2xxx/qla_gbl.h | 12 +-
drivers/scsi/qla2xxx/qla_gs.c | 11 +
drivers/scsi/qla2xxx/qla_init.c | 426 +++++++++++++++---
drivers/scsi/qla2xxx/qla_iocb.c | 42 ++-
drivers/scsi/qla2xxx/qla_isr.c | 139 ++++--
drivers/scsi/qla2xxx/qla_mbx.c | 50 ++-
drivers/scsi/qla2xxx/qla_mid.c | 4 +-
drivers/scsi/qla2xxx/qla_mr.c | 252 ++---------
drivers/scsi/qla2xxx/qla_mr.h | 57 +--
drivers/scsi/qla2xxx/qla_nx.c | 21 +-
drivers/scsi/qla2xxx/qla_nx2.c | 22 +-
drivers/scsi/qla2xxx/qla_os.c | 155 +++++--
drivers/scsi/qla2xxx/qla_sup.c | 65 ++-
drivers/scsi/qla2xxx/qla_tmpl.c | 909 ++++++++++++++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_tmpl.h | 205 ++++++++
drivers/scsi/qla2xxx/qla_version.h | 4 +-
drivers/scsi/scsi_transport_fc.c | 1 +
include/scsi/scsi_transport_fc.h | 1 +
26 files changed, 2248 insertions(+), 548 deletions(-)
create mode 100644 drivers/scsi/qla2xxx/qla_tmpl.c
create mode 100644 drivers/scsi/qla2xxx/qla_tmpl.h
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
