Turns out git-am didn't like your patch, although I don't understand
why. I just manually reapplied it and also applied it to mpt2sas while
at it, find the two patches I put into the tree below.
LSI folks: can you look over this? I also think the sas_remove_host
and scsi_remove_host calks in _scsih_remove are way too later for both
drivers still, they should be done at the beginning of the function just
after setting ioc->remove_host = 1. Can you please look into verifying
the patches below, and look into sorting out the host removal? Thanks!
>From 8f3571a791c7adf633edf4c4d00c7c8fca2bdb54 Mon Sep 17 00:00:00 2001
From: "Elliott, Robert (Server Storage)" <elli...@hp.com>
Date: Fri, 6 Jun 2014 15:59:25 +0200
Subject: mpt3sas: delay scsi_add_host call to work with scsi-mq
In _scsih_probe, delay the call to scsi_add_host until the host has been
fully set up.
Otherwise, the default .can_queue value of 1 causes scsi-mq to set the block
layer request queue size to its minimum size, resulting in awful performance.
In _scsih_probe error handling, call mpt3sas_base_detach rather than
scsi_remove_host to properly clean up in reverse order.
In _scsih_remove, call scsi_remove_host earlier to clean up in reverse order.
Signed-off-by: Robert Elliott <elli...@hp.com>
Signed-off-by: Christoph Hellwig <h...@lst.de>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 18e713d..52e4038 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -7431,9 +7431,9 @@ static void _scsih_remove(struct pci_dev *pdev)
}
sas_remove_host(shost);
+ scsi_remove_host(shost);
mpt3sas_base_detach(ioc);
list_del(&ioc->list);
- scsi_remove_host(shost);
scsi_host_put(shost);
}
@@ -7801,13 +7801,6 @@ _scsih_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
}
}
- if ((scsi_add_host(shost, &pdev->dev))) {
- pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- list_del(&ioc->list);
- goto out_add_shost_fail;
- }
-
/* register EEDP capabilities with SCSI layer */
if (prot_mask > 0)
scsi_host_set_prot(shost, prot_mask);
@@ -7835,15 +7828,23 @@ _scsih_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
ioc->name, __FILE__, __LINE__, __func__);
goto out_attach_fail;
}
+
+ if ((scsi_add_host(shost, &pdev->dev))) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ list_del(&ioc->list);
+ goto out_add_shost_fail;
+ }
+
scsi_scan_host(shost);
return 0;
+ out_add_shost_fail:
+ mpt3sas_base_detach(ioc);
out_attach_fail:
destroy_workqueue(ioc->firmware_event_thread);
out_thread_fail:
list_del(&ioc->list);
- scsi_remove_host(shost);
- out_add_shost_fail:
scsi_host_put(shost);
return -ENODEV;
}
--
1.7.10.4
>From 0b48e7f2cce8c1f91eff27dd6d48deadba83f58f Mon Sep 17 00:00:00 2001
From: "Elliott, Robert (Server Storage)" <elli...@hp.com>
Date: Fri, 6 Jun 2014 16:02:42 +0200
Subject: mpt2sas: delay scsi_add_host call to work with scsi-mq
In _scsih_probe, delay the call to scsi_add_host until the host has been
fully set up.
Otherwise, the default .can_queue value of 1 causes scsi-mq to set the block
layer request queue size to its minimum size, resulting in awful performance.
In _scsih_probe error handling, call mpt3sas_base_detach rather than
scsi_remove_host to properly clean up in reverse order.
In _scsih_remove, call scsi_remove_host earlier to clean up in reverse order.
Signed-off-by: Robert Elliott <elli...@hp.com>
Signed-off-by: Christoph Hellwig <h...@lst.de>
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 5055f92..4f8a45f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -7857,9 +7857,9 @@ _scsih_remove(struct pci_dev *pdev)
}
sas_remove_host(shost);
+ scsi_remove_host(shost);
mpt2sas_base_detach(ioc);
list_del(&ioc->list);
- scsi_remove_host(shost);
scsi_host_put(shost);
}
@@ -8200,13 +8200,6 @@ _scsih_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
}
}
- if ((scsi_add_host(shost, &pdev->dev))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- list_del(&ioc->list);
- goto out_add_shost_fail;
- }
-
/* register EEDP capabilities with SCSI layer */
if (prot_mask)
scsi_host_set_prot(shost, prot_mask);
@@ -8248,16 +8241,23 @@ _scsih_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
}
} else
ioc->hide_drives = 0;
+
+ if ((scsi_add_host(shost, &pdev->dev))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out_add_shost_fail;
+ }
+
scsi_scan_host(shost);
return 0;
+ out_add_shost_fail:
+ mpt2sas_base_detach(ioc);
out_attach_fail:
destroy_workqueue(ioc->firmware_event_thread);
out_thread_fail:
list_del(&ioc->list);
- scsi_remove_host(shost);
- out_add_shost_fail:
scsi_host_put(shost);
return -ENODEV;
}
--
1.7.10.4
