Thanks Brad for testing and fixing.
Acked-by: Jack Wang <xjtu...@gmail.com>

On 06/19/2014 05:13 PM, bradley.gr...@gmail.com wrote:
> From: Bradley Grove <bgr...@attotech.com>
> 
> During hibernation, the HBA firmware may lose power and forget the device
> id info.   This causes the HBA to reject IO upon resume.   The fix is
> to call the libsas power management routines to make the domain device
> forgetful.
> 
> This fixes bug 76681: https://bugzilla.kernel.org/show_bug.cgi?id=76681
> 
> Signed-off-by: Bradley Grove <bgr...@attotech.com>
> ---
>  drivers/scsi/pm8001/pm8001_init.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/pm8001/pm8001_init.c 
> b/drivers/scsi/pm8001/pm8001_init.c
> index c4f31b21..86cf03a 100644
> --- a/drivers/scsi/pm8001/pm8001_init.c
> +++ b/drivers/scsi/pm8001/pm8001_init.c
> @@ -957,6 +957,7 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, 
> pm_message_t state)
>       int  i, j;
>       u32 device_state;
>       pm8001_ha = sha->lldd_ha;
> +     sas_suspend_ha(sha);
>       flush_workqueue(pm8001_wq);
>       scsi_block_requests(pm8001_ha->shost);
>       if (!pdev->pm_cap) {
> @@ -1006,6 +1007,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
>       int rc;
>       u8 i = 0, j;
>       u32 device_state;
> +     DECLARE_COMPLETION_ONSTACK(completion);
>       pm8001_ha = sha->lldd_ha;
>       device_state = pdev->current_state;
>  
> @@ -1026,7 +1028,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
>       rc = pci_go_44(pdev);
>       if (rc)
>               goto err_out_disable;
> -
> +     sas_prep_resume_ha(sha);
>       /* chip soft rst only for spc */
>       if (pm8001_ha->chip_id == chip_8001) {
>               PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
> @@ -1058,7 +1060,13 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
>               for (i = 1; i < pm8001_ha->number_of_intr; i++)
>                       PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
>       }
> -     scsi_unblock_requests(pm8001_ha->shost);
> +     pm8001_ha->flags = PM8001F_RUN_TIME;
> +     for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
> +             pm8001_ha->phy[i].enable_completion = &completion;
> +             PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
> +             wait_for_completion(&completion);
> +     }
> +     sas_resume_ha(sha);
>       return 0;
>  
>  err_out_disable:
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to