Any comment to this patch? Thanks Chuanxiao
> -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Chuanxiao Dong > Sent: Friday, August 01, 2014 4:01 PM > To: [email protected] > Cc: [email protected]; [email protected]; > [email protected] > Subject: [PATCH] scsi: ufs: fix Command Type issue according to UFS 2.0 spec > > UFS 2.0 spec defines that the command type in transfer descriptor is always > 0x1 instead of different values as shown in UFSHC1.0/1.1. > > This patch will distingwish v1.0/v1.1 UFSHC and later UFSHC when setting CT > > Signed-off-by: Chuanxiao Dong <[email protected]> > --- > drivers/scsi/ufs/ufshcd.c | 27 +++++++++++++++++++++------ > 1 file changed, 21 insertions(+), 6 deletions(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index > ba27215..8635d5d 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -706,16 +706,19 @@ static void ufshcd_disable_intr(struct ufs_hba *hba, > u32 intrs) > /** > * ufshcd_prepare_req_desc_hdr() - Fills the requests header > * descriptor according to request > + * @hba: per adapter instance > * @lrbp: pointer to local reference block > * @upiu_flags: flags required in the header > * @cmd_dir: requests data direction > */ > -static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp, > - u32 *upiu_flags, enum dma_data_direction cmd_dir) > +static void ufshcd_prepare_req_desc_hdr(struct ufs_hba *hba, > + struct ufshcd_lrb *lrbp, u32 *upiu_flags, > + enum dma_data_direction cmd_dir) > { > struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr; > u32 data_direction; > u32 dword_0; > + u8 cmd_type; > > if (cmd_dir == DMA_FROM_DEVICE) { > data_direction = UTP_DEVICE_TO_HOST; > @@ -728,8 +731,20 @@ static void ufshcd_prepare_req_desc_hdr(struct > ufshcd_lrb *lrbp, > *upiu_flags = UPIU_CMD_FLAGS_NONE; > } > > - dword_0 = data_direction | (lrbp->command_type > - << UPIU_COMMAND_TYPE_OFFSET); > + /* > + * Per UFSHCI spec v1.0/v1.1, Command Type in UTP transfer > + * request descriptor is not the same as v2.0 spec. > + * In v2.0 spec, Command Type is always 1, the other values > + * are reserved > + */ > + if (hba->ufs_version == UFSHCI_VERSION_10 || > + hba->ufs_version == UFSHCI_VERSION_11) > + cmd_type = lrbp->command_type; > + else > + cmd_type = UTP_CMD_TYPE_UFS; > + > + dword_0 = data_direction | (cmd_type << > UPIU_COMMAND_TYPE_OFFSET); > + > if (lrbp->intr_cmd) > dword_0 |= UTP_REQ_DESC_INT_CMD; > > @@ -834,7 +849,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, > struct ufshcd_lrb *lrbp) > switch (lrbp->command_type) { > case UTP_CMD_TYPE_SCSI: > if (likely(lrbp->cmd)) { > - ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, > + ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, > lrbp->cmd->sc_data_direction); > ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags); > } else { > @@ -842,7 +857,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, > struct ufshcd_lrb *lrbp) > } > break; > case UTP_CMD_TYPE_DEV_MANAGE: > - ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE); > + ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE); > if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) > ufshcd_prepare_utp_query_req_upiu( > hba, lrbp, upiu_flags); > -- > 1.7.10.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the > body > of a message to [email protected] More majordomo info at > http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
