On 11/21/2014 11:08 AM, Paolo Bonzini wrote:
>
>
> On 21/11/2014 10:27, Hannes Reinecke wrote:
>> CONFIG2_FENAB ('feature enable') changed definition between chip
>> revisions, from 'Latch SCSI Phase' to 'Latch SCSI Phase, display
>> chip ID upon reset, and enable 24 bit addresses'.
>> So only enable it for am53c974 where we know what it's doing.
>>
>> Signed-off-by: Hannes Reinecke <[email protected]>
>> ---
>> drivers/scsi/am53c974.c | 30 ++++++++++++++++++++++++++++++
>> drivers/scsi/esp_scsi.c | 4 ++++
>> 2 files changed, 34 insertions(+)
>>
>> diff --git a/drivers/scsi/am53c974.c b/drivers/scsi/am53c974.c
>> index 0452ed1..722e781 100644
>> --- a/drivers/scsi/am53c974.c
>> +++ b/drivers/scsi/am53c974.c
>> @@ -252,6 +252,8 @@ static void pci_esp_send_dma_cmd(struct esp *esp, u32
>> addr, u32 esp_count,
>>
>> pci_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
>> pci_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
>> + if (esp->config2 & ESP_CONFIG2_FENAB)
>> + pci_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
>
> Why do this conditionally? We know that FENAB is true here, don't we?
>
> (Maybe I'm missing something obvious though).
>
Not really. Point is that 'FENAB' does actually three things:
- Enable TCHI for 24-bit DMA transfer lengths
- Provide Chip ID in TCHI after reset
- Latch SCSI phase after completion in SCSI STATUS
So we _might_ run into timing issues due to the last point, so I've
made it conditional in case we'd have to disable it.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
[email protected] +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
