On Tue, 2014-12-30 at 12:08 -0500, James Smart wrote:
> This patch, applicable to 8G/4G/2G adapters, adds a call that 
> resumes transmit operations after a link bounce. Without it, targets
> that tried to suspend exchanges after a link bounce (such as tape devices
> using sequence level error recovery) would never resume io operation,
> causing scan failures, and eventually deadlocks if a device removal
> request is made.
> 
> The patches were cut against Christoph's scsi-queue.git,
> branch "drivers-for-3.18".  The driver rev cut against is 10.4.8000.0
> 
> -- james s
> 
> 
> Signed-off-by: James Smart <[email protected]>
> Signed-off-by: Dick Kennedy <[email protected]>
> ---
>  lpfc_els.c |    9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff -upNr a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
> --- a/drivers/scsi/lpfc/lpfc_els.c    2014-12-29 12:48:08.000000000 -0500
> +++ b/drivers/scsi/lpfc/lpfc_els.c    2014-12-30 11:23:04.344426606 -0500
> @@ -2225,6 +2225,15 @@ lpfc_adisc_done(struct lpfc_vport *vport
>       if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
>           !(vport->fc_flag & FC_RSCN_MODE) &&
>           (phba->sli_rev < LPFC_SLI_REV4)) {
> +             /* The ADISCs are complete.  Doesn't matter if they
> +              * succeeded or failed because the ADISC completion
> +              * routine guarantees to call the state machine and
> +              * the RPI is either unregistered (failed ADISC response)
> +              * or the RPI is still valid and the node is marked
> +              * mapped for a target.  The exchanges should be in the
> +              * correct state. This code is specific to SLI3.
> +              */
> +             lpfc_issue_clear_la(phba, vport);
>               lpfc_issue_reg_vpi(phba, vport);
>               return;
>       }
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reviewed-by: Ewan D. Milne <[email protected]>


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to