Update MPI 2.5 Release: MPI 2.5 Rev I (2.5.4) specification and 2.00.33 header 
files

Below is the change set from the MPI specification for I Rev

1) Added Base Enclosure Level bit to the Flags field of Manufacturing Page 7.
2) Updated description of the MaxTargetPortConnectTime field of SAS IO Unit 
Page 1.
3) Added EnclosureLevel and ConnectorName fields to SAS Device Page 0. Also, 
added EnclosureLevel and ConnectorName Valid bit to the Flags field.
4) Added EnclosureLevel field to SAS Enclosure Page 0. Also, added 
EnclosureLevel Valid bit to the Flags field.
5) Added value for BIOS image to HashImageType.

Signed-off-by: Sreekanth Reddy <sreekanth.re...@avagotech.com>
---
 drivers/scsi/mpt3sas/mpi/mpi2.h      |  6 ++++--
 drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 27 +++++++++++++++++++++------
 drivers/scsi/mpt3sas/mpi/mpi2_ioc.h  |  4 +++-
 3 files changed, 28 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index c34c115..d730c5c 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
  *                 scatter/gather formats.
  * Creation Date:  June 21, 2006
  *
- * mpi2.h Version:  02.00.31
+ * mpi2.h Version:  02.00.33
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -88,6 +88,8 @@
  *                     Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
  * 04-09-13  02.00.30  Bumped MPI2_HEADER_VERSION_UNIT.
  * 04-17-13  02.00.31  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-19-13  02.00.32  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-05-13  02.00.33  Bumped MPI2_HEADER_VERSION_UNIT.
  * --------------------------------------------------------------------------
  */
 
@@ -121,7 +123,7 @@
 #define MPI2_VERSION_02_05                  (0x0205)
 
 /*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x1F)
+#define MPI2_HEADER_VERSION_UNIT            (0x21)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h 
b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index e261a31..62dfbf6 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
  *         Title:  MPI Configuration messages and pages
  * Creation Date:  November 10, 2006
  *
- *   mpi2_cnfg.h Version:  02.00.26
+ *   mpi2_cnfg.h Version:  02.00.27
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -165,6 +165,16 @@
  *                     match the specification.
  * 08-19-13  02.00.26  Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
  *                     future use.
+ * 12-05-13  02.00.27  Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
+ *                    MPI2_CONFIG_PAGE_MAN_7.
+ *                    Added EnclosureLevel and ConnectorName fields to
+ *                    MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *                    Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
+ *                    MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *                    Added EnclosureLevel field to
+ *                    MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ *                    Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
+ *                    MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
  * --------------------------------------------------------------------------
  */
 
@@ -724,6 +734,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
 #define MPI2_MANUFACTURING7_PAGEVERSION                 (0x01)
 
 /*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL         (0x00000008)
 #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER       (0x00000002)
 #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO                (0x00000001)
 
@@ -2633,9 +2644,9 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
        U8
                ControlGroup;           /*0x2E */
        U8
-               Reserved1;              /*0x2F */
+               EnclosureLevel;         /*0x2F */
        U32
-               Reserved2;              /*0x30 */
+               ConnectorName[4];       /*0x30 */
        U32
                Reserved3;              /*0x34 */
 } MPI2_CONFIG_PAGE_SAS_DEV_0,
@@ -2643,7 +2654,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
        Mpi2SasDevicePage0_t,
        *pMpi2SasDevicePage0_t;
 
-#define MPI2_SASDEVICE0_PAGEVERSION         (0x08)
+#define MPI2_SASDEVICE0_PAGEVERSION         (0x09)
 
 /*values for SAS Device Page 0 AccessStatus field */
 #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS                  (0x00)
@@ -2683,6 +2694,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED           (0x0020)
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED           (0x0010)
 #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH         (0x0008)
+#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID             (0x0002)
 #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)
 
 
@@ -3019,8 +3031,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
                NumSlots;                   /*0x18 */
        U16
                StartSlot;                  /*0x1A */
-       U16
+       U8
                Reserved2;                  /*0x1C */
+       U8
+               EnclosureLevel;             /*0x1D */
        U16
                SEPDevHandle;               /*0x1E */
        U32
@@ -3031,9 +3045,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
        *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
        Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
 
-#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x03)
+#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)
 
 /*values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES           (0x0001)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h 
b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 4908309..d7598cc 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
  *         Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  * Creation Date:  October 11, 2006
  *
- * mpi2_ioc.h Version:  02.00.23
+ * mpi2_ioc.h Version:  02.00.24
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -132,6 +132,7 @@
  *                     Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
  *                     Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
  *                     Added Encrypted Hash Extended Image.
+ * 12-05-13  02.00.24  Added MPI25_HASH_IMAGE_TYPE_BIOS.
  * --------------------------------------------------------------------------
  */
 
@@ -1598,6 +1599,7 @@ Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
 /* values for HashImageType */
 #define MPI25_HASH_IMAGE_TYPE_UNUSED           (0x00)
 #define MPI25_HASH_IMAGE_TYPE_FIRMWARE         (0x01)
+#define MPI25_HASH_IMAGE_TYPE_BIOS              (0x02)
 
 /* values for HashAlgorithm */
 #define MPI25_HASH_ALGORITHM_UNUSED            (0x00)
-- 
2.0.2

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to