Driver initialization fails if driver tries to send IOC facts request message
when the IOC is in reset or in a fault state.
This patch will make sure that
1.Driver to send IOC facts request message only if HBA is in operational or
ready state.
2.If IOC is in fault state, a diagnostic reset would be issued.
3.If IOC is in reset state then driver will wait for 10 seconds to exit out of
reset state.
If the HBA continues to be in reset state, then the HBA wouldn't be claimed
by the driver.
Changes in v1:
If PCI Recovery is on then return with -EFAULT in the function
_base_wait_for_iocstate().
Changes in v2:
Patch version change only.
Signed-off-by: Sreekanth Reddy <sreekanth.re...@avagotech.com>
Reviewed-by: Martin K. Petersen <martin.peter...@oracle.com>
Reviewed-by: Tomas Henzl <the...@redhat.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 68 +++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c
b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 63a8588..0410cc5 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3189,6 +3189,9 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32
ioc_state, int timeout,
* Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
*/
static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
+
+static int
_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
int sleep_flag)
{
@@ -3731,6 +3734,64 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int
port, int sleep_flag)
}
/**
+ * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
+ * @ioc: per adapter object
+ * @timeout:
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
+ int sleep_flag)
+{
+ u32 ioc_state;
+ int rc;
+
+ dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->pci_error_recovery) {
+ dfailprintk(ioc, printk(MPT3SAS_FMT
+ "%s: host in pci error recovery\n", ioc->name, __func__));
+ return -EFAULT;
+ }
+
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
+ ioc->name, __func__, ioc_state));
+
+ if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
+ (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+ return 0;
+
+ if (ioc_state & MPI2_DOORBELL_USED) {
+ dhsprintk(ioc, printk(MPT3SAS_FMT
+ "unexpected doorbell active!\n", ioc->name));
+ goto issue_diag_reset;
+ }
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+ mpt3sas_base_fault_info(ioc, ioc_state &
+ MPI2_DOORBELL_DATA_MASK);
+ goto issue_diag_reset;
+ }
+
+ ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
+ timeout, sleep_flag);
+ if (ioc_state) {
+ dfailprintk(ioc, printk(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state));
+ return -EFAULT;
+ }
+
+ issue_diag_reset:
+ rc = _base_diag_reset(ioc, sleep_flag);
+ return rc;
+}
+
+/**
* _base_get_ioc_facts - obtain ioc facts reply and save in ioc
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
@@ -3748,6 +3809,13 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int
sleep_flag)
dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
__func__));
+ r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
+ if (r) {
+ dfailprintk(ioc, printk(MPT3SAS_FMT
+ "%s: failed getting to correct state\n",
+ ioc->name, __func__));
+ return r;
+ }
mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
memset(&mpi_request, 0, mpi_request_sz);
--
2.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
