Ok. will follow-up with new patch. We probably lower it to 4 instead of 8 :).
Thanks, -----Original Message----- From: Tomas Henzl [mailto:the...@redhat.com] Sent: Wednesday, July 22, 2015 8:10 AM To: Rajinikanth Pandurangan; jbottom...@parallels.com; linux-scsi@vger.kernel.org Cc: aacr...@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara; Achim Leubner; Murthy Bhat Subject: Re: [PATCH V4 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range() On 22.7.2015 16:55, Rajinikanth Pandurangan wrote: > Hello Tomas, > > Yes, in case of failure, we'll fall into msi. Well ok, if you want support msi-x mode only with exactly 8 msi-x lines, that's fine... But because it creates another functional change - (before this patch also values lower than eight were allowed please split this patch into two parts. One for replacing pci_enable_msix() with pci_enable_msix_range() and the other for setting a hard limit to 8 msi-x lines. -tm > > Thanks, > -----Original Message----- > From: Tomas Henzl [mailto:the...@redhat.com] > Sent: Wednesday, July 22, 2015 6:56 AM > To: Rajinikanth Pandurangan; jbottom...@parallels.com; > linux-scsi@vger.kernel.org > Cc: aacr...@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh > Rajashekhara; Achim Leubner; Murthy Bhat > Subject: Re: [PATCH V4 10/10] [SCSI] aacraid: Replace > pci_enable_msix() with pci_enable_msix_range() > > On 21.7.2015 19:59, rajinikanth.panduran...@pmcs.com wrote: >> From: Rajinikanth Pandurangan <rajinikanth.panduran...@pmcs.com> >> >> Description: >> As pci_enable_msix() deprecated, replaced with >> pci_enable_msix_range() >> >> V3 Reviewed/commented by: >> Tomas Henzl <the...@redhat.com> >> >> Changes from V3: >> Uses pci_enable_msix_range() instead of pci_enable_msix_exact() >> based on review comment. >> >> Signed-off-by: Rajinikanth Pandurangan >> <rajinikanth.panduran...@pmcs.com> >> --- >> drivers/scsi/aacraid/comminit.c | 20 ++++++-------------- >> 1 file changed, 6 insertions(+), 14 deletions(-) >> >> diff --git a/drivers/scsi/aacraid/comminit.c >> b/drivers/scsi/aacraid/comminit.c index b4b6088..3ba6e97 100644 >> --- a/drivers/scsi/aacraid/comminit.c >> +++ b/drivers/scsi/aacraid/comminit.c >> @@ -338,7 +338,7 @@ static int aac_comm_init(struct aac_dev * dev) >> >> void aac_define_int_mode(struct aac_dev *dev) { >> - int i, msi_count; >> + int i, msi_count, min_msix; >> >> msi_count = i = 0; >> /* max. vectors from GET_COMM_PREFERRED_SETTINGS */ @@ -366,22 >> +366,14 @@ void aac_define_int_mode(struct aac_dev *dev) >> >> if (msi_count > 1 && >> pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) { >> - i = pci_enable_msix(dev->pdev, >> + min_msix = 8; > That^ will make the pci-enable function fail on boxes with less than > eight num-online-cpus > > -tm > >> + i = pci_enable_msix_range(dev->pdev, >> dev->msixentry, >> + min_msix, >> msi_count); >> - /* Check how many MSIX vectors are allocated */ >> - if (i >= 0) { >> + if (i > 0) { >> dev->msi_enabled = 1; >> - if (i) { >> - msi_count = i; >> - if (pci_enable_msix(dev->pdev, >> - dev->msixentry, >> - msi_count)) { >> - dev->msi_enabled = 0; >> - printk(KERN_ERR "%s%d: MSIX not >> supported!! Will try MSI 0x%x.\n", >> - dev->name, dev->id, i); >> - } >> - } >> + msi_count = i; >> } else { >> dev->msi_enabled = 0; >> printk(KERN_ERR "%s%d: MSIX not supported!! Will try >> MSI >> 0x%x.\n", >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" > in the body of a message to majord...@vger.kernel.org More majordomo > info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
