Hi, On Thu, Nov 19, 2015 at 12:08:32PM -0800, James Bottomley wrote: > On Thu, 2015-11-19 at 11:54 -0800, Bart Van Assche wrote: > > On 11/19/2015 11:22 AM, Aaro Koskinen wrote: > > > [ 2.702105] scsi 0:0:0:0: Direct-Access Ext Hard Disk > > > PQ: 0 ANSI: 5 > > > [ 2.714214] sd 0:0:0:0: [sda] Spinning up disk... > > > [ 3.720503] ... > > > [ 6.674040] usb 1-1: USB disconnect, device number 2 > > > [ 6.750508] .ready > > > [ 6.752558] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: > > > hostbyte=0x00 driverbyte=0x04 > > > [ 6.761112] sd 0:0:0:0: [sda] Sense not available. > > > [ 6.765918] sd 0:0:0:0: [sda] Write Protect is off > > > [ 6.770741] sd 0:0:0:0: [sda] Asking for cache data failed > > > [ 6.776236] sd 0:0:0:0: [sda] Assuming drive cache: write through > > > [ 6.782745] ------------[ cut here ]------------ > > > [ 6.787383] WARNING: CPU: 1 PID: 15 at > > > /home/aaro/git/linux/block/genhd.c:626 add_disk+0x41c/0x478() > > It's obviously caused by your patch ... look at the event sequence: it's > a disconnect triggering removal on an in-process probe.
FYI, this sequence is 100% reproducible on my setup. The disk is in Macally USB enclosure. On cold-boot it will stay on "Spinning up disk" phase until I manually press the ON button. And that's when the disconnect message appears, don't know why... A. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
