On 1.12.2015 13:39, Raghava Aditya Renukunta wrote:
> From: Raghava Aditya Renukunta <[email protected]>
>
> The method to allocate and free FIB's in the present code utilizes
> spinlocks.Multiple IO's have to wait on the spinlock to acquire or
> free fibs creating a performance bottleneck.
>
> An alternative solution would be to use block layer tags to keep track
> of the fibs allocated and freed. To this end 2 functions
> aac_fib_alloc_tag and aac_fib_free_tag were created which utilize the
> blk layer tags to plug into the Fib pool.These functions are used
> exclusively in the IO path. 8 fibs are reserved for the use of AIF
> management software and utilize the previous spinlock based
> implementations.
>
> Signed-off-by: Raghava Aditya Renukunta <[email protected]>
> ---
>  drivers/scsi/aacraid/aachba.c  | 35 +++++++++++++++++-------------
>  drivers/scsi/aacraid/aacraid.h |  2 ++
>  drivers/scsi/aacraid/commsup.c | 49 
> +++++++++++++++++++++++++++++++++++++++---
>  drivers/scsi/aacraid/dpcsup.c  |  4 ++--
>  drivers/scsi/aacraid/linit.c   |  2 ++
>  5 files changed, 72 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
> index e4c2437..06cbab8 100644
> --- a/drivers/scsi/aacraid/aachba.c
> +++ b/drivers/scsi/aacraid/aachba.c
> @@ -323,7 +323,7 @@ static inline int aac_valid_context(struct scsi_cmnd 
> *scsicmd,
>       if (unlikely(!scsicmd || !scsicmd->scsi_done)) {
>               dprintk((KERN_WARNING "aac_valid_context: scsi command 
> corrupt\n"));
>               aac_fib_complete(fibptr);
> -             aac_fib_free(fibptr);
> +             aac_fib_free_tag(fibptr);
>               return 0;
>       }
>       scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
> @@ -331,7 +331,7 @@ static inline int aac_valid_context(struct scsi_cmnd 
> *scsicmd,
>       if (unlikely(!device || !scsi_device_online(device))) {
>               dprintk((KERN_WARNING "aac_valid_context: scsi device 
> corrupt\n"));
>               aac_fib_complete(fibptr);
> -             aac_fib_free(fibptr);
> +             aac_fib_free_tag(fibptr);
>               return 0;
>       }
>       return 1;
> @@ -541,7 +541,7 @@ static void get_container_name_callback(void *context, 
> struct fib * fibptr)
>       scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
>  
>       aac_fib_complete(fibptr);
> -     aac_fib_free(fibptr);
> +     aac_fib_free_tag(fibptr);
>       scsicmd->scsi_done(scsicmd);
>  }
>  
> @@ -557,7 +557,8 @@ static int aac_get_container_name(struct scsi_cmnd * 
> scsicmd)
>  
>       dev = (struct aac_dev *)scsicmd->device->host->hostdata;
>  
> -     if (!(cmd_fibcontext = aac_fib_alloc(dev)))
> +     cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
> +     if (!cmd_fibcontext)
>               return -ENOMEM;
>  
>       aac_fib_init(cmd_fibcontext);
> @@ -586,7 +587,7 @@ static int aac_get_container_name(struct scsi_cmnd * 
> scsicmd)
>  
>       printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with 
> status: %d.\n", status);
>       aac_fib_complete(cmd_fibcontext);
> -     aac_fib_free(cmd_fibcontext);
> +     aac_fib_free_tag(cmd_fibcontext);
>       return -1;
>  }
>  
> @@ -1024,7 +1025,7 @@ static void get_container_serial_callback(void 
> *context, struct fib * fibptr)
>       scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
>  
>       aac_fib_complete(fibptr);
> -     aac_fib_free(fibptr);
> +     aac_fib_free_tag(fibptr);
>       scsicmd->scsi_done(scsicmd);
>  }
>  
> @@ -1040,7 +1041,8 @@ static int aac_get_container_serial(struct scsi_cmnd * 
> scsicmd)
>  
>       dev = (struct aac_dev *)scsicmd->device->host->hostdata;
>  
> -     if (!(cmd_fibcontext = aac_fib_alloc(dev)))
> +     cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
> +     if (!cmd_fibcontext)
>               return -ENOMEM;
>  
>       aac_fib_init(cmd_fibcontext);
> @@ -1068,7 +1070,7 @@ static int aac_get_container_serial(struct scsi_cmnd * 
> scsicmd)
>  
>       printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with 
> status: %d.\n", status);
>       aac_fib_complete(cmd_fibcontext);
> -     aac_fib_free(cmd_fibcontext);
> +     aac_fib_free_tag(cmd_fibcontext);
>       return -1;
>  }
>  
> @@ -1869,7 +1871,7 @@ static void io_callback(void *context, struct fib * 
> fibptr)
>               break;
>       }
>       aac_fib_complete(fibptr);
> -     aac_fib_free(fibptr);
> +     aac_fib_free_tag(fibptr);
>  
>       scsicmd->scsi_done(scsicmd);
>  }
> @@ -1954,7 +1956,8 @@ static int aac_read(struct scsi_cmnd * scsicmd)
>       /*
>        *      Alocate and initialize a Fib
>        */
> -     if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
> +     cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
> +     if (!cmd_fibcontext) {
>               printk(KERN_WARNING "aac_read: fib allocation failed\n");
>               return -1;
>       }
> @@ -2051,7 +2054,8 @@ static int aac_write(struct scsi_cmnd * scsicmd)
>       /*
>        *      Allocate and initialize a Fib then setup a BlockWrite command
>        */
> -     if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
> +     cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
> +     if (!cmd_fibcontext) {
>               /* FIB temporarily unavailable,not catastrophic failure */
>  
>               /* scsicmd->result = DID_ERROR << 16;
> @@ -2285,7 +2289,7 @@ static int aac_start_stop(struct scsi_cmnd *scsicmd)
>       /*
>        *      Allocate and initialize a Fib
>        */
> -     cmd_fibcontext = aac_fib_alloc(aac);
> +     cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
>       if (!cmd_fibcontext)
>               return SCSI_MLQUEUE_HOST_BUSY;
>  
> @@ -3157,7 +3161,7 @@ static void aac_srb_callback(void *context, struct fib 
> * fibptr)
>       scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
>  
>       aac_fib_complete(fibptr);
> -     aac_fib_free(fibptr);
> +     aac_fib_free_tag(fibptr);
>       scsicmd->scsi_done(scsicmd);
>  }
>  
> @@ -3187,9 +3191,10 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
>       /*
>        *      Allocate and initialize a Fib then setup a BlockWrite command
>        */
> -     if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
> +     cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
> +     if (!cmd_fibcontext)
>               return -1;
> -     }
> +
>       status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
>  
>       /*
> diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
> index 074878b..da227e8 100644
> --- a/drivers/scsi/aacraid/aacraid.h
> +++ b/drivers/scsi/aacraid/aacraid.h
> @@ -2114,9 +2114,11 @@ int aac_acquire_irq(struct aac_dev *dev);
>  void aac_free_irq(struct aac_dev *dev);
>  const char *aac_driverinfo(struct Scsi_Host *);
>  struct fib *aac_fib_alloc(struct aac_dev *dev);
> +struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd);
>  int aac_fib_setup(struct aac_dev *dev);
>  void aac_fib_map_free(struct aac_dev *dev);
>  void aac_fib_free(struct fib * context);
> +void aac_fib_free_tag(struct fib *context);
>  void aac_fib_init(struct fib * context);
>  void aac_printf(struct aac_dev *dev, u32 val);
>  int aac_fib_send(u16 command, struct fib * context, unsigned long size, int 
> priority, int wait, int reply, fib_callback callback, void *ctxt);
> diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
> index a1f90fe..b5b653c 100644
> --- a/drivers/scsi/aacraid/commsup.c
> +++ b/drivers/scsi/aacraid/commsup.c
> @@ -156,9 +156,9 @@ int aac_fib_setup(struct aac_dev * dev)
>        */
>       dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = 
> NULL;
>       /*
> -      *      Enable this to debug out of queue space
> -      */
> -     dev->free_fib = &dev->fibs[0];
> +     *       Set 8 fibs aside for management tools
> +     */
> +     dev->free_fib = &dev->fibs[dev->scsi_host_ptr->can_queue];
>       return 0;
>  }
>  
> @@ -166,6 +166,49 @@ int aac_fib_setup(struct aac_dev * dev)
>   *   aac_fib_alloc   -       allocate a fib
>   *   @dev: Adapter to allocate the fib for
>   *
> + *   Allocate a fib from the adapter fib pool using tags
> + *   from the blk layer.
> + */
> +
> +struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
> +{
> +     struct fib *fibptr;
> +
> +     fibptr = &dev->fibs[scmd->request->tag];
> +     /*
> +      *      Set the proper node type code and node byte size
> +      */

Can't you just make most of the initialisation below just once when the driver 
starts?

> +     fibptr->type = FSAFS_NTC_FIB_CONTEXT;
> +     fibptr->size = sizeof(struct fib);
> +     /*
> +      *      Null out fields that depend on being zero at the start of
> +      *      each I/O
> +      */
> +     fibptr->hw_fib_va->header.XferState = 0;
> +     fibptr->flags = 0;

For example the flags field is initialised  here to '0', then
in aac_fib_send again to zero and later is 'fibptr->flags = FIB_CONTEXT_FLAG;'
Removing part of it would help I think.
The code here is not new so, if I am right, please plan it for a next series. 

> +     fibptr->callback = NULL;
> +     fibptr->callback_data = NULL;
> +
> +     return fibptr;
> +}
> +
> +/**
> + *   aac_fib_free_tag        free a fib
> + *   @fibptr: fib to free up
> + *
> + *   Placeholder to free tag allocated fibs
> + *   Does not do anything
> + */
> +
> +void aac_fib_free_tag(struct fib *fibptr)
> +{
> +     (void)fibptr;
> +}

I agree with Johannes, I also don't like the aac_fib_free_tag as it is.
With the aac_fib_free_tag you may add -
Reviewed-by: Tomas Henzl <[email protected]>
 
Tomas

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to