On Mon, Apr 4, 2016 at 4:47 PM, Hannes Reinecke <[email protected]> wrote:
> ZAC drives implement 'zac management in' command template,
> which maps onto the ZBC IN command.
>
> Signed-off-by: Hannes Reinecke <[email protected]>
> ---
> drivers/ata/libata-eh.c | 1 +
> drivers/ata/libata-scsi.c | 144
> ++++++++++++++++++++++++++++++++++++++++++
> include/linux/ata.h | 4 ++
> include/trace/events/libata.h | 1 +
> 4 files changed, 150 insertions(+)
>
> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
> index e6b16f4..e947bd5 100644
> --- a/drivers/ata/libata-eh.c
> +++ b/drivers/ata/libata-eh.c
> @@ -2480,6 +2480,7 @@ const char *ata_get_cmd_descript(u8 command)
> { ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT
> ERASE" },
> { ATA_CMD_REQ_SENSE_DATA, "REQUEST SENSE DATA EXT" },
> { ATA_CMD_SANITIZE_DEVICE, "SANITIZE DEVICE" },
> + { ATA_CMD_ZAC_MGMT_IN, "ZAC MANAGEMENT IN" },
> { ATA_CMD_READ_LONG, "READ LONG (with retries)" },
> { ATA_CMD_READ_LONG_ONCE, "READ LONG (without retries)"
> },
> { ATA_CMD_WRITE_LONG, "WRITE LONG (with retries)" },
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index d29832f..21c2b40 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -3310,6 +3310,147 @@ invalid_opcode:
> return 1;
> }
>
> +/*
> + * ata_scsi_report_zones_complete
> + *
> + * Convert T-13 little-endian field representation into
> + * T-10 big-endian field representation.
> + */
> +static void ata_scsi_report_zones_complete(struct ata_queued_cmd *qc)
> +{
> + struct scsi_cmnd *scmd = qc->scsicmd;
> + struct sg_mapping_iter miter;
> + unsigned long flags;
> + unsigned int bytes = 0;
> +
> + sg_miter_start(&miter, scsi_sglist(scmd), scsi_sg_count(scmd),
> + SG_MITER_TO_SG | SG_MITER_ATOMIC);
> +
> + local_irq_save(flags);
> + while (sg_miter_next(&miter)) {
> + unsigned int offset = 0;
> +
> + if (bytes == 0) {
> + char *hdr;
> + u32 list_length;
> + u64 max_lba, opt_lba;
> + u16 same;
> +
> + /* Swizzle header */
> + hdr = miter.addr;
> + list_length = get_unaligned_le32(&hdr[0]);
> + same = get_unaligned_le16(&hdr[4]);
> + max_lba = get_unaligned_le64(&hdr[8]);
> + opt_lba = get_unaligned_le64(&hdr[16]);
> + put_unaligned_be32(list_length, &hdr[0]);
> + hdr[4] = same & 0xf;
> + put_unaligned_be64(max_lba, &hdr[8]);
> + put_unaligned_be64(opt_lba, &hdr[16]);
> + offset += 64;
> + bytes += 64;
> + }
> + while (offset < miter.length) {
> + char *rec;
> + u8 cond, type, non_seq, reset;
> + u64 size, start, wp;
> +
> + /* Swizzle zone descriptor */
> + rec = miter.addr + offset;
> + type = rec[0] & 0xf;
> + cond = (rec[1] >> 4) & 0xf;
> + non_seq = (rec[1] & 2);
> + reset = (rec[1] & 1);
> + size = get_unaligned_le64(&rec[8]);
> + start = get_unaligned_le64(&rec[16]);
> + wp = get_unaligned_le64(&rec[24]);
> + rec[0] = type;
> + rec[1] = (cond << 4) | non_seq | reset;
The bit munging around rec[0] and rec[1] look unnecessary to me.
Does the top nibble of re[0] and bits 2 and 3 of rec[1] really
need these cleanups?
> + put_unaligned_be64(size, &rec[8]);
> + put_unaligned_be64(start, &rec[16]);
> + put_unaligned_be64(wp, &rec[24]);
> + WARN_ON(offset + 64 > miter.length);
> + offset += 64;
> + bytes += 64;
> + }
> + }
> + sg_miter_stop(&miter);
> + local_irq_restore(flags);
> +
> + ata_scsi_qc_complete(qc);
> +}
> +
> +static unsigned int ata_scsi_zbc_in_xlat(struct ata_queued_cmd *qc)
> +{
> + struct ata_taskfile *tf = &qc->tf;
> + struct scsi_cmnd *scmd = qc->scsicmd;
> + const u8 *cdb = scmd->cmnd;
> + u16 sect, fp = (u16)-1;
> + u8 sa, options, bp = 0xff;
> + u64 block;
> + u32 n_block;
> +
> + if (unlikely(scmd->cmd_len < 16)) {
> + ata_dev_warn(qc->dev, "invalid cdb length %d\n",
> + scmd->cmd_len);
> + fp = 15;
> + goto invalid_fld;
> + }
> + scsi_16_lba_len(cdb, &block, &n_block);
> + if (n_block != scsi_bufflen(scmd)) {
> + ata_dev_warn(qc->dev, "non-matching transfer count (%d/%d)\n",
> + n_block, scsi_bufflen(scmd));
> + goto invalid_param_len;
> + }
> + sa = cdb[1] & 0x1f;
> + if (sa != ZI_REPORT_ZONES) {
> + ata_dev_warn(qc->dev, "invalid service action %d\n", sa);
> + fp = 1;
> + goto invalid_fld;
> + }
> + /*
> + * ZAC allows only for transfers in 512 byte blocks,
> + * and uses a 16 bit value for the transfer count.
> + */
> + if ((n_block / 512) > 0xffff || n_block < 512 || (n_block % 512)) {
> + ata_dev_warn(qc->dev, "invalid transfer count %d\n", n_block);
> + goto invalid_param_len;
> + }
> + sect = n_block / 512;
> + options = cdb[14];
> +
> + tf->command = ATA_CMD_ZAC_MGMT_IN;
> + tf->feature = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES;
> + tf->protocol = ATA_PROT_DMA;
> + tf->hob_feature = options & 0x3f;
> + tf->hob_nsect = (sect >> 8) & 0xff;
> + tf->nsect = sect & 0xff;
> + tf->device = ATA_LBA;
> + tf->lbah = (block >> 16) & 0xff;
> + tf->lbam = (block >> 8) & 0xff;
> + tf->lbal = block & 0xff;
> + tf->hob_lbah = (block >> 40) & 0xff;
> + tf->hob_lbam = (block >> 32) & 0xff;
> + tf->hob_lbal = (block >> 24) & 0xff;
> +
> + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
> + qc->flags |= ATA_QCFLAG_RESULT_TF;
> +
> + ata_qc_set_pc_nbytes(qc);
> +
> + qc->complete_fn = ata_scsi_report_zones_complete;
> +
> + return 0;
> +
> +invalid_fld:
> + ata_scsi_set_invalid_field(qc->dev, scmd, fp, bp);
> + return 1;
> +
> +invalid_param_len:
> + /* "Parameter list length error" */
> + ata_scsi_set_sense(qc->dev, scmd, ILLEGAL_REQUEST, 0x1a, 0x0);
> + return 1;
> +}
> +
> /**
> * ata_mselect_caching - Simulate MODE SELECT for caching info page
> * @qc: Storage for translated ATA taskfile
> @@ -3623,6 +3764,9 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct
> ata_device *dev, u8 cmd)
> return ata_scsi_mode_select_xlat;
> break;
>
> + case ZBC_IN:
> + return ata_scsi_zbc_in_xlat;
> +
> case START_STOP:
> return ata_scsi_start_stop_xlat;
> }
> diff --git a/include/linux/ata.h b/include/linux/ata.h
> index e402cb3..2e4a6af 100644
> --- a/include/linux/ata.h
> +++ b/include/linux/ata.h
> @@ -301,6 +301,7 @@ enum {
> ATA_CMD_CFA_WRITE_MULT_NE = 0xCD,
> ATA_CMD_REQ_SENSE_DATA = 0x0B,
> ATA_CMD_SANITIZE_DEVICE = 0xB4,
> + ATA_CMD_ZAC_MGMT_IN = 0x4A,
>
> /* marked obsolete in the ATA/ATAPI-7 spec */
> ATA_CMD_RESTORE = 0x10,
> @@ -309,6 +310,9 @@ enum {
> ATA_SUBCMD_FPDMA_SEND_DSM = 0x00,
> ATA_SUBCMD_FPDMA_SEND_WR_LOG_DMA_EXT = 0x02,
>
> + /* Subcmds for ATA_CMD_ZAC_MGMT_IN */
> + ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES = 0x00,
> +
> /* READ_LOG_EXT pages */
> ATA_LOG_SATA_NCQ = 0x10,
> ATA_LOG_NCQ_SEND_RECV = 0x13,
> diff --git a/include/trace/events/libata.h b/include/trace/events/libata.h
> index 8b0fbd9..02ec4e5 100644
> --- a/include/trace/events/libata.h
> +++ b/include/trace/events/libata.h
> @@ -97,6 +97,7 @@
> ata_opcode_name(ATA_CMD_CFA_WRITE_MULT_NE), \
> ata_opcode_name(ATA_CMD_REQ_SENSE_DATA), \
> ata_opcode_name(ATA_CMD_SANITIZE_DEVICE), \
> + ata_opcode_name(ATA_CMD_ZAC_MGMT_IN), \
> ata_opcode_name(ATA_CMD_RESTORE), \
> ata_opcode_name(ATA_CMD_READ_LONG), \
> ata_opcode_name(ATA_CMD_READ_LONG_ONCE), \
> --
> 1.8.5.6
>
The zone report looks good.
Tested-by: Shaun Tancheff <[email protected]>
--
Shaun Tancheff
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
