Only SRC-based adapters support the AifReqEvent function, so there is no point in trying to activate it on older, non-SRC based adapters. Doing so lead to crashes on older adapters.
Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Hannes Reinecke <[email protected]> --- drivers/scsi/aacraid/aacraid.h | 5 +++++ drivers/scsi/aacraid/linit.c | 11 ++++++----- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 8f90d9e..969c312 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -621,6 +621,11 @@ struct aac_driver_ident #define AAC_QUIRK_SCSI_32 0x0020 /* + * SRC based adapters support the AifReqEvent functions + */ +#define AAC_QUIRK_SRC 0x0040 + +/* * The adapter interface specs all queues to be located in the same * physically contiguous block. The host structure that defines the * commuication queues will assume they are each a separate physically diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index a943bd2..79871f3 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -236,10 +236,10 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */ - { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 6 (Tupelo) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 7 (Denali) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 8 */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Series 9 */ + { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC } /* Adaptec PMC Series 9 */ }; /** @@ -1299,7 +1299,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) else shost->this_id = shost->max_id; - aac_intr_normal(aac, 0, 2, 0, NULL); + if (aac_drivers[index].quirks & AAC_QUIRK_SRC) + aac_intr_normal(aac, 0, 2, 0, NULL); /* * dmb - we may need to move the setting of these parms somewhere else once -- 1.8.5.6 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
