This series introduces support for zoned block devices. It integrates earlier submissions by Hannes Reinecke and Shaun Tancheff. Compared to the previous series version, the code was significantly simplified by limiting support to zoned devices satisfying the following conditions: 1) All zones of the device are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads must be unrestricted (read commands do not fail due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are ignored.
These 2 conditions allowed dropping the zone information cache implemented in the previous version. This simplifies the code and also reduces the memory consumption at run time. Support for zoned devices now only require one bit per zone (less than 8KB in total). This bit field is used to write-lock zones and prevent the concurrent execution of multiple write commands in the same zone. This avoids write ordering problems at dispatch time, for both the simple queue and scsi-mq settings. The new operations introduced to suport zone manipulation was reduced to only the two main ZBC/ZAC defined commands: REPORT ZONES (REQ_OP_ZONE_REPORT) and RESET WRITE POINTER (REQ_OP_ZONE_RESET). This brings the total number of operations defined to 8, which fits in the 3 bits (REQ_OP_BITS) reserved for operation code in bio->bi_opf and req->cmd_flags. Most of the ZBC specific code is kept out of sd.c and implemented in the new file sd_zbc.c. Similarly, at the block layer, most of the zoned block device code is implemented in the new blk-zoned.c. For host-managed zoned block devices, the sequential write constraint of write pointer zones is exposed to the user. Users of the disk (applications, file systems or device mappers) must sequentially write to zones. This means that for raw block device accesses from applications, buffered writes are unreliable and direct I/Os must be used (or buffered writes with O_SYNC). Access to zone manipulation operations is also provided to applications through a set of new ioctls. This allows applications operating on raw block devices (e.g. mkfs.xxx) to discover a device zone layout and manipulate zone state. v8: * Fixed compile time warnings (unused variable and sd_printk format) * For unsupported host-aware drives, the zone write lock bitmap is not allocated, so check it before trying to use it v7: * Fixed problems with zone write locking: - Wrong sdkp->zone_wlock bitmap allocation size - Incorrect (reversed condition) test of lock state with test_and_set_bit - Potential error in sd_setup_read_write_cmnd could leave a zone locked without the locking write command being executed v6: * Rebased on Jens' for-4.9/block branch (v5 is based on next-20160928) v5: * Changed interface of sd_zbc_setup_read_write v4: * Fixed several typos and tabs/spaces * Added description of zoned and chunk_sectors queue attributes in Documentation/ABI/testing/sysfs-block * Fixed sd_read_capacity call in sd.c and to avoid missing information on the first pass of a disk scan * Fixed scsi_disk zone related field to use logical block size unit instead of 512B sector unit. v3: * Use kcalloc to allocate zone information array for ioctl * Use kcalloc to allocate zone information array for ioctl * Export GPL the functions blkdev_report_zones and blkdev_reset_zones * Shuffled uapi definitions from patch 7 into patch 5 v2 * Removed zone information cache * Limit support to drives that have unrestricted reads and a constant zone size that is a power of two number of LBAs * Introduce per zone write locking to avoid write reordering for both blk-mq and simple queue cases Damien Le Moal (1): block: Add 'zoned' queue limit Hannes Reinecke (4): blk-sysfs: Add 'chunk_sectors' to sysfs attributes block: update chunk_sectors in blk_stack_limits() block: Implement support for zoned block devices sd: Implement support for ZBC devices Shaun Tancheff (2): block: Define zoned block device operations blk-zoned: implement ioctls Documentation/ABI/testing/sysfs-block | 29 ++ block/Kconfig | 8 + block/Makefile | 1 + block/blk-core.c | 4 + block/blk-settings.c | 5 + block/blk-sysfs.c | 29 ++ block/blk-zoned.c | 350 ++++++++++++++++++ block/ioctl.c | 4 + drivers/scsi/Makefile | 1 + drivers/scsi/sd.c | 148 ++++++-- drivers/scsi/sd.h | 70 ++++ drivers/scsi/sd_zbc.c | 642 ++++++++++++++++++++++++++++++++++ include/linux/blk_types.h | 2 + include/linux/blkdev.h | 99 ++++++ include/scsi/scsi_proto.h | 17 + include/uapi/linux/Kbuild | 1 + include/uapi/linux/blkzoned.h | 143 ++++++++ include/uapi/linux/fs.h | 4 + 18 files changed, 1522 insertions(+), 35 deletions(-) create mode 100644 block/blk-zoned.c create mode 100644 drivers/scsi/sd_zbc.c create mode 100644 include/uapi/linux/blkzoned.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html