Hi Subhash,
On Wed, Nov 2, 2016 at 12:17 AM, Subhash Jadavani
<[email protected]> wrote:
> On 2016-10-29 13:22, Vivek Gautam wrote:
>>
>> Add phy clock enable code to phy_power_on/off callbacks, and
>> remove explicit calls to enable these phy clocks from the
>> ufs-qcom hcd driver.
>>
>> Signed-off-by: Vivek Gautam <[email protected]>
>> ---
>>
>> Changes since v2:
>> - Added phy_power_on() and phy_power_off() calls to
>> power-cycle the PHY during aggressive clk gating.
>>
>> Changes since v1:
>> - staticized ufs_qcom_phy_enable(/disable)_ref_clk(),
>> - staticized ufs_qcom_phy_enable(/disable)_iface_clk()
>> - removed function declaration and export symbol for these APIs.
>>
>> drivers/phy/phy-qcom-ufs.c | 36
>> ++++++++++++++++++------------------
>> drivers/scsi/ufs/ufs-qcom.c | 18 +++---------------
>> include/linux/phy/phy-qcom-ufs.h | 18 ------------------
>> 3 files changed, 21 insertions(+), 51 deletions(-)
>>
[snip]
>> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
>> index 3aedf73..9b6a081 100644
>> --- a/drivers/scsi/ufs/ufs-qcom.c
>> +++ b/drivers/scsi/ufs/ufs-qcom.c
>> @@ -1112,17 +1112,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba
>> *hba, bool on)
>> return 0;
>>
>> if (on) {
>> - err = ufs_qcom_phy_enable_iface_clk(host->generic_phy);
>> - if (err)
>> - goto out;
>> -
>> - err = ufs_qcom_phy_enable_ref_clk(host->generic_phy);
>> - if (err) {
>> - dev_err(hba->dev, "%s enable phy ref clock failed,
>> err=%d\n",
>> - __func__, err);
>> - ufs_qcom_phy_disable_iface_clk(host->generic_phy);
>> - goto out;
>> - }
>> + phy_power_on(host->generic_phy);
>> /* enable the device ref clock for HS mode*/
>> if (ufshcd_is_hs_mode(&hba->pwr_info))
>> ufs_qcom_dev_ref_clk_ctrl(host, true);
>> @@ -1131,9 +1121,8 @@ static int ufs_qcom_setup_clocks(struct ufs_hba
>> *hba, bool on)
>> ufs_qcom_update_bus_bw_vote(host);
>>
>> } else {
>> -
>> - /* M-PHY RMMI interface clocks can be turned off */
>> - ufs_qcom_phy_disable_iface_clk(host->generic_phy);
>> + /* powering off PHY during aggressive clk gating */
>> + phy_power_off(host->generic_phy);
>
>
> We can only power off PHY if link isn't active so phy_power_off call should
> be under phy link not active condition check below. Rest all looks good in
> this patch.
Correct, will update this.
Thanks!
>
>
>> if (!ufs_qcom_is_link_active(hba))
>> /* disable device ref_clk */
>> ufs_qcom_dev_ref_clk_ctrl(host, false);
>> @@ -1146,7 +1135,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba
>> *hba, bool on)
>> dev_err(hba->dev, "%s: set bus vote failed %d\n",
>> __func__, err);
>>
>> -out:
>> return err;
>> }
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
