Hi,
On Tue, Nov 1, 2016 at 2:41 AM, Subhash Jadavani <[email protected]> wrote: > On 2016-10-29 13:22, Vivek Gautam wrote: >> >> Add a new compatible string for 14nm ufs phy present on msm8996 >> chipset. This phy is bit different from the legacy 14nm ufs phy >> in terms of the clocks that are needed to be handled in the driver. >> >> Signed-off-by: Vivek Gautam <[email protected]> >> --- >> >> New patch in v3 of this cleanup series. >> >> Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 7 +++++-- >> drivers/phy/phy-qcom-ufs-qmp-14nm.c | 1 + >> 2 files changed, 6 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt >> b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt >> index 070baf4..b6b5130 100644 >> --- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt >> +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt >> @@ -7,8 +7,11 @@ To bind UFS PHY with UFS host controller, the >> controller node should >> contain a phandle reference to UFS PHY node. >> >> Required properties: >> -- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm" >> - or "qcom,ufs-phy-qmp-14nm" according to the relevant >> phy in use. >> +- compatible : compatible list, contains one of the following - >> + "qcom,ufs-phy-qmp-20nm" for 20nm ufs phy, >> + "qcom,ufs-phy-qmp-14nm" for legacy 14nm ufs phy, >> + "qcom,msm8996-ufs-phy-qmp-14nm" for 14nm ufs phy >> + present on MSM8996 chipset. > > For future chipsets (after MSM8996), we have to use this same compatible > strings? If yes, "msm8996" in compatible string name may cause confusions? > may be we should start following v1/v2/... terminologies for this? > something like "qcom,ufs-phy-qmp-v2" to start with? Are we trying to complement the actual IP hardware versioning with this ? Isn't it possible that we will end up using v2 for more than a couple of actual IP hardware versions ? I have seen cases wherein the IP versions are preceded by the SOC names, the IPs appeared first in. And if the same IP is used in subsequent SOCs, we use same compatible string. This, rather, makes things easier to comprehend - it's the same IP that was used on older SoC. I am fine with adding versions to the compatible string as well. But like i asked earlier - are we just creating versions for our own understanding, or are we also complementing the actual IP hardware versions ? Thanks Vivek -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
