These things are defined to be used by some UFS Host controllers.
And a new file for some declarations of mphy standard is added
V2
- modify the commit message
- add a new macro for UECDL
- add two definitions about UECDL
- change the names of two macros
(s/IS_PWR_MODE_HS/IS_HS_PWR_MODE, s/IS_PWR_MODE_PWM/IS_PWM_PWR_MODE)
Signed-off-by: Kiwoong Kim <kwmad....@samsung.com>
---
drivers/scsi/ufs/mphy.h | 38 ++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshci.h | 17 ++++++++++++++---
drivers/scsi/ufs/unipro.h | 26 ++++++++++++++++++++++++++
3 files changed, 78 insertions(+), 3 deletions(-)
create mode 100644 drivers/scsi/ufs/mphy.h
diff --git a/drivers/scsi/ufs/mphy.h b/drivers/scsi/ufs/mphy.h
new file mode 100644
index 0000000..c431f49
--- /dev/null
+++ b/drivers/scsi/ufs/mphy.h
@@ -0,0 +1,38 @@
+/*
+ * drivers/scsi/ufs/mphy.h
+ *
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _MPHY_H_
+#define _MPHY_H_
+
+#define TX_HIBERN8TIME_CAP 0x0f
+#define TX_MIN_ACTIVATE_TIME 0x33
+
+#define RX_HS_G1_SYNC_LEN_CAP 0x8b
+#define RX_HS_G1_PREP_LEN_CAP 0x8c
+#define RX_HS_G2_SYNC_LEN_CAP 0x94
+#define RX_HS_G3_SYNC_LEN_CAP 0x95
+#define RX_HS_G2_PREP_LEN_CAP 0x96
+#define RX_HS_G3_PREP_LEN_CAP 0x97
+ #define SYNC_RANGE_FINE (0 << 6)
+ #define SYNC_RANGE_COARSE (1 << 6)
+ #define SYNC_LEN(x) ((x) & 0x3f)
+ #define PREP_LEN(x) ((x) & 0xf)
+#define RX_ADV_GRANULARITY_CAP 0x98
+ #define RX_ADV_GRAN_STEP(x) ((((x) & 0x3) << 1) | 0x1)
+#define TX_ADV_GRANULARITY_CAP 0x10
+ #define TX_ADV_GRAN_STEP(x) ((((x) & 0x3) << 1) | 0x1)
+#define RX_MIN_ACTIVATETIME_CAP 0x8f
+#define RX_HIBERN8TIME_CAP 0x92
+#define RX_ADV_HIBERN8TIME_CAP 0x99
+#define RX_ADV_MIN_ACTIVATETIME_CAP 0x9a
+
+#endif /* _MPHY_H_ */
+
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 9599741..a1a06ac9 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -170,17 +170,28 @@ enum {
/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
-#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
-#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
-#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
+#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED UFS_BIT(0)
+#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT UFS_BIT(1)
+#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF UFS_BIT(5)
+#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT UFS_BIT(13)
+#define UIC_DATA_LINK_LAYER_ERROR_CASE(r, x) (r & x)
/* UECN - Host UIC Error Code Network Layer 40h */
#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
+#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE BIT(0)
+#define UIC_NETWORK_BAD_DEVICEID_ENC BIT(1)
+#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING BIT(2)
/* UECT - Host UIC Error Code Transport Layer 44h */
#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
+#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE BIT(0)
+#define UIC_TRANSPORT_UNKNOWN_CPORTID BIT(1)
+#define UIC_TRANSPORT_NO_CONNECTION_RX BIT(2)
+#define UIC_TRANSPORT_BAD_TC BIT(4)
+#define UIC_TRANSPORT_E2E_CREDIT_OVERFLOW BIT(5)
+#define UIC_TRANSPORT_SAFETY_VALVE_DROPPING BIT(6)
/* UECDME - Host UIC Error Code DME 48h */
#define UIC_DME_ERROR UFS_BIT(31)
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index eff8b56..490d867 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -127,6 +127,7 @@
#define PA_PACPREQEOBTIMEOUT 0x1591
#define PA_HIBERN8TIME 0x15A7
#define PA_LOCALVERINFO 0x15A9
+#define PA_GRANULARITY 0x15AA
#define PA_TACTIVATE 0x15A8
#define PA_PACPFRAMECOUNT 0x15C0
#define PA_PACPERRORCOUNT 0x15C1
@@ -170,6 +171,9 @@ enum {
UNCHANGED = 7,
};
+#define IS_HS_PWR_MODE(m) (((m) == FAST_MODE) || ((m) == FASTAUTO_MODE))
+#define IS_PWM_PWR_MODE(m) (((m) == SLOW_MODE) || ((m) == SLOWAUTO_MODE))
+
/* PA TX/RX Frequency Series */
enum {
PA_HS_MODE_A = 1,
@@ -231,6 +235,11 @@ enum ufs_unipro_ver {
#define DL_PEERTC1PRESENT 0x2066
#define DL_PEERTC1RXINITCREVAL 0x2067
+/* Default value of L2 Timer */
+#define FC0PROTTIMEOUTVAL 8191
+#define TC0REPLAYTIMEOUTVAL 65535
+#define AFC0REQTIMEOUTVAL 32767
+
/*
* Network Layer Attributes
*/
@@ -259,6 +268,23 @@ enum ufs_unipro_ver {
#define T_TC0TXMAXSDUSIZE 0x4060
#define T_TC1TXMAXSDUSIZE 0x4061
+/* CPort setting */
+#define T_CPORTFLAGS_E2EFC_ON (1 << 0)
+#define T_CPORTFLAGS_E2EFC_OFF (0 << 0)
+#define T_CPORTFLAGS_CSD_N_ON (0 << 1)
+#define T_CPORTFLAGS_CSD_N_OFF (1 << 1)
+#define T_CPORTFLAGS_CSV_N_ON (0 << 2)
+#define T_CPORTFLAGS_CSV_N_OFF (1 << 2)
+#define T_CPORTFLAGS_DEF (T_CPORTFLAGS_CSV_N_OFF | \
+ T_CPORTFLAGS_CSD_N_OFF | \
+ T_CPORTFLAGS_E2EFC_OFF)
+
+/* CPort connection state */
+enum {
+ CPORT_IDLE = 0,
+ CPORT_CONNECTED,
+};
+
#ifdef FALSE
#undef FALSE
#endif
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
