Hello,
There is a race condition with qla2xxx optrom functions where
one thread might modify optrom buffer, optrom_state while
other thread is still reading from it.
In couple of crashes, it was found that we had successfully
passed the following 'if' check where we confirm optrom_state
to be QLA_SREADING. But by the time we acquired mutex lock
to proceed with memory_read_from_buffer function, some other
thread/process had already modified that option rom buffer
and optrom_state from QLA_SREADING to QLA_SWAITING. Then
we got ha->optrom_buffer 0x0 and crashed the system:
if (ha->optrom_state != QLA_SREADING)
return 0;
mutex_lock(&ha->optrom_mutex);
rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
ha->optrom_region_size);
mutex_unlock(&ha->optrom_mutex);
With current optrom function we get following crash due to
a race condition:
[ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 1479.466707] IP: [<ffffffff81326756>] memcpy+0x6/0x110
[...]
[ 1479.473673] Call Trace:
[ 1479.474296] [<ffffffff81225cbc>] ? memory_read_from_buffer+0x3c/0x60
[ 1479.474941] [<ffffffffa01574dc>] qla2x00_sysfs_read_optrom+0x9c/0xc0
[qla2xxx]
[ 1479.475571] [<ffffffff8127e76b>] read+0xdb/0x1f0
[ 1479.476206] [<ffffffff811fdf9e>] vfs_read+0x9e/0x170
[ 1479.476839] [<ffffffff811feb6f>] SyS_read+0x7f/0xe0
[ 1479.477466] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b
Below patch modifies qla2x00_sysfs_read_optrom,
qla2x00_sysfs_write_optrom functions to get the mutex_lock
before checking ha->optrom_state to avoid similar crashes.
The patch was applied and tested and same crashes were no
longer observed again.
Tested-by: Milan P. Gandhi <[email protected]>
Signed-off-by: Milan P. Gandhi <[email protected]>
---
drivers/scsi/qla2xxx/qla_attr.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index da5ae11..47ea164 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -329,12 +329,15 @@ qla2x00_sysfs_read_optrom(struct file *filp, struct
kobject *kobj,
struct qla_hw_data *ha = vha->hw;
ssize_t rval = 0;
+ mutex_lock(&ha->optrom_mutex);
+
if (ha->optrom_state != QLA_SREADING)
- return 0;
+ goto out;
- mutex_lock(&ha->optrom_mutex);
rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
ha->optrom_region_size);
+
+out:
mutex_unlock(&ha->optrom_mutex);
return rval;
@@ -349,14 +352,19 @@ qla2x00_sysfs_write_optrom(struct file *filp, struct
kobject *kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
- if (ha->optrom_state != QLA_SWRITING)
+ mutex_lock(&ha->optrom_mutex);
+
+ if (ha->optrom_state != QLA_SWRITING) {
+ mutex_unlock(&ha->optrom_mutex);
return -EINVAL;
- if (off > ha->optrom_region_size)
+ }
+ if (off > ha->optrom_region_size) {
+ mutex_unlock(&ha->optrom_mutex);
return -ERANGE;
+ }
if (off + count > ha->optrom_region_size)
count = ha->optrom_region_size - off;
- mutex_lock(&ha->optrom_mutex);
memcpy(&ha->optrom_buffer[off], buf, count);
mutex_unlock(&ha->optrom_mutex);
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
