While doing some disruptive testing with QEMU/KVM, I have encountered some
guest problems during hot unplug of virtio-scsi devices depending on the
order of operations in which they are performed. The following notes
describe my setup (s390x), and how I'm able to reproduce the error and
test the attached fix.
In both the "working" and "failing" case, the detaches appear to work
just fine. Any sign of problems only begin to appear later based on
other actions I may perform, such as powering off the guest system.
Host:
# lsscsi -g | grep sg6
[6:0:6:1074151456]disk IBM 2107900 .217 /dev/sdg /dev/sg6
QEMU:
- Include the following parameters
-device virtio-scsi-ccw,id=scsi0
-drive file=/dev/sg6,if=none,id=drive0,format=raw
-device
scsi-generic,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive0,id=hostdev6
- QMP commands (working)
- device_del hostdev6
- device_del scsi0
- QMP commands (failing)
- device_del scsi0
Libvirt:
- Note: A preventative fix went into Libvirt 2.5.0
(libvirt commit 655429a0d4a5 ("qemu: Prevent detaching SCSI controller used
by hostdev"))
- Include the following XML
# cat scsicontroller.xml
<controller type='scsi' model='virtio-scsi' index='0'/>
# cat scsihostdev.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host6'/>
<address bus='0' target='6' unit='1074151456'/>
</source>
</hostdev>
- virsh commands (working)
- virsh detach-device guest scsihostdev.xml
- virsh detach-device guest scsicontroller.xml
- virsh commands (failing)
- virsh detach-device guest scsicontroller.xml
Eric Farman (1):
virtio_scsi: Reject commands when virtqueue is broken
drivers/scsi/virtio_scsi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
