> -----Original Message-----
> From: Tomas Henzl [mailto:[email protected]]
> Sent: Friday, March 10, 2017 7:24 AM
> To: Don Brace <[email protected]>; [email protected];
> Gerry Morong <[email protected]>; John Hall
> <[email protected]>; [email protected]; Kevin Barnett
> <[email protected]>; Mahesh Rajashekhara
> <[email protected]>; Bader Ali - Saleh
> <[email protected]>; [email protected]; Scott Teel
> <[email protected]>; Viswas G <[email protected]>; Justin
> Lindley <[email protected]>; Scott Benesh
> <[email protected]>; [email protected]
> Cc: [email protected]
> Subject: Re: [PATCH 1/3] hpsa: update check for logical volume status
>
> EXTERNAL EMAIL
>
>
> On 6.3.2017 22:24, Don Brace wrote:
> > - Add in a new case for volume offline. Resolves internal
> > testing bug for multilun array management.
> > - Return correct status for failed TURs.
> >
> > Reviewed-by: Scott Benesh <[email protected]>
> > Reviewed-by: Scott Teel <[email protected]>
> > Signed-off-by: Don Brace <[email protected]>
> > ---
> > drivers/scsi/hpsa.c | 26 +++++++++++++-------------
> > drivers/scsi/hpsa_cmd.h | 2 ++
> > 2 files changed, 15 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
> > index 524a0c7..1adc4ec 100644
> > --- a/drivers/scsi/hpsa.c
> > +++ b/drivers/scsi/hpsa.c
> > @@ -3735,7 +3735,7 @@ static int hpsa_volume_offline(struct ctlr_info
> *h,
> > DEFAULT_TIMEOUT);
> > if (rc) {
> > cmd_free(h, c);
>
> Hi Don,
> patch is ok, but this function returns a mix of either HPSA_LV_*
> values or some magic numbers.
> Could you replace the 0xff with HPSA_VPD_LV_STATUS_UNSUPPORTED
> (like it is in hpsa_get_volume_status)
> and in case of success return HPSA_LV_OK ?
>
> Also it would make sense to change the return value
> from 'int' to 'unsigned char' and to drop
> this test
> volume_offline = hpsa_volume_offline(h, scsi3addr);
> if (volume_offline < 0 || volume_offline > 0xff)
> volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED;
> this_device->volume_offline = volume_offline & 0xff;
>
> from hpsa_update_device_info since the condition is never met.
> Switching volume_offline to an unsigned char everywhere might be also
> possible.
>
> tomash
Agreed, be up in a V2.
And thank-you for your reviews.
Thanks,
Don Brace
ESC - Smart Storage
Microsemi Corporation
>
> > - return 0;
> > + return 0xff;
> > }
> > sense = c->err_info->SenseInfo;
> > if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
> > @@ -3746,19 +3746,13 @@ static int hpsa_volume_offline(struct
> ctlr_info *h,
> > cmd_status = c->err_info->CommandStatus;
> > scsi_status = c->err_info->ScsiStatus;
> > cmd_free(h, c);
> > - /* Is the volume 'not ready'? */
> > - if (cmd_status != CMD_TARGET_STATUS ||
> > - scsi_status != SAM_STAT_CHECK_CONDITION ||
> > - sense_key != NOT_READY ||
> > - asc != ASC_LUN_NOT_READY) {
> > - return 0;
> > - }
> >
> > /* Determine the reason for not ready state */
> > ldstat = hpsa_get_volume_status(h, scsi3addr);
> >
> > /* Keep volume offline in certain cases: */
> > switch (ldstat) {
> > + case HPSA_LV_FAILED:
> > case HPSA_LV_UNDERGOING_ERASE:
> > case HPSA_LV_NOT_AVAILABLE:
> > case HPSA_LV_UNDERGOING_RPI:
> > @@ -3853,10 +3847,10 @@ static int hpsa_update_device_info(struct
> ctlr_info *h,
> > /* Do an inquiry to the device to see what it is. */
> > if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
> > (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
> > - /* Inquiry failed (msg printed already) */
> > dev_err(&h->pdev->dev,
> > - "hpsa_update_device_info: inquiry failed\n");
> > - rc = -EIO;
> > + "%s: inquiry failed, device will be skipped.\n",
> > + __func__);
> > + rc = HPSA_INQUIRY_FAILED;
> > goto bail_out;
> > }
> >
> > @@ -3894,6 +3888,13 @@ static int hpsa_update_device_info(struct
> ctlr_info *h,
> > if (volume_offline < 0 || volume_offline > 0xff)
> > volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED;
> > this_device->volume_offline = volume_offline & 0xff;
> > + if (volume_offline == HPSA_LV_FAILED) {
> > + rc = HPSA_LV_FAILED;
> > + dev_err(&h->pdev->dev,
> > + "%s: LV failed, device will be skipped.\n",
> > + __func__);
> > + goto bail_out;
> > + }
> > } else {
> > this_device->raid_level = RAID_UNKNOWN;
> > this_device->offload_config = 0;
> > @@ -4379,8 +4380,7 @@ static void hpsa_update_scsi_devices(struct
> ctlr_info *h)
> > goto out;
> > }
> > if (rc) {
> > - dev_warn(&h->pdev->dev,
> > - "Inquiry failed, skipping device.\n");
> > + h->drv_req_rescan = 1;
> > continue;
> > }
> >
> > diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
> > index a584cdf..5961705 100644
> > --- a/drivers/scsi/hpsa_cmd.h
> > +++ b/drivers/scsi/hpsa_cmd.h
> > @@ -156,6 +156,7 @@
> > #define CFGTBL_BusType_Fibre2G 0x00000200l
> >
> > /* VPD Inquiry types */
> > +#define HPSA_INQUIRY_FAILED 0x02
> > #define HPSA_VPD_SUPPORTED_PAGES 0x00
> > #define HPSA_VPD_LV_DEVICE_ID 0x83
> > #define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1
> > @@ -166,6 +167,7 @@
> > /* Logical volume states */
> > #define HPSA_VPD_LV_STATUS_UNSUPPORTED 0xff
> > #define HPSA_LV_OK 0x0
> > +#define HPSA_LV_FAILED 0x01
> > #define HPSA_LV_NOT_AVAILABLE 0x0b
> > #define HPSA_LV_UNDERGOING_ERASE 0x0F
> > #define HPSA_LV_UNDERGOING_RPI 0x12
> >
