On 28.4.2017 20:20, Don Brace wrote:
> - mark device state sooner.
>
> Reviewed-by: Scott Benesh <[email protected]>
> Reviewed-by: Scott Teel <[email protected]>
> Reviewed-by: Kevin Barnett <[email protected]>
> Signed-off-by: Don Brace <[email protected]>
> ---
> drivers/scsi/hpsa.c | 59
> +++++++++++++++++++++++++++++++++++++++------------
> drivers/scsi/hpsa.h | 1 +
> 2 files changed, 46 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
> index a2852da..71f32e9 100644
> --- a/drivers/scsi/hpsa.c
> +++ b/drivers/scsi/hpsa.c
> @@ -1859,10 +1859,13 @@ static void adjust_hpsa_scsi_table(struct ctlr_info
> *h,
> * A reset can cause a device status to change
> * re-schedule the scan to see what happened.
> */
> + spin_lock_irqsave(&h->reset_lock, flags);
> if (h->reset_in_progress) {
> + spin_unlock_irqrestore(&h->reset_lock, flags);
> h->drv_req_rescan = 1;
> return;
> }
> + spin_unlock_irqrestore(&h->reset_lock, flags);
>
> added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL);
> removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL);
> @@ -5618,11 +5621,14 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
> /*
> * Do the scan after a reset completion
> */
> + spin_lock_irqsave(&h->reset_lock, flags);
> if (h->reset_in_progress) {
> + spin_unlock_irqrestore(&h->reset_lock, flags);
> h->drv_req_rescan = 1;
> hpsa_scan_complete(h);
> return;
> }
> + spin_unlock_irqrestore(&h->reset_lock, flags);
Hi Don,
I glad the spinlock helped, but how is the code protected when another thread
enters hpsa_eh_device_reset_handler in parallel when the first thread just
called the 'spin_unlock_irqrestore(&h->reset_lock' ?
tomash
>
> hpsa_update_scsi_devices(h);
>
> @@ -5834,28 +5840,38 @@ static int wait_for_device_to_become_ready(struct
> ctlr_info *h,
> */
> static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
> {
> - int rc;
> + int rc = SUCCESS;
> struct ctlr_info *h;
> struct hpsa_scsi_dev_t *dev;
> u8 reset_type;
> char msg[48];
> + unsigned long flags;
>
> /* find the controller to which the command to be aborted was sent */
> h = sdev_to_hba(scsicmd->device);
> if (h == NULL) /* paranoia */
> return FAILED;
>
> - if (lockup_detected(h))
> - return FAILED;
> + spin_lock_irqsave(&h->reset_lock, flags);
> + h->reset_in_progress = 1;
> + spin_unlock_irqrestore(&h->reset_lock, flags);
> +
> + if (lockup_detected(h)) {
> + rc = FAILED;
> + goto return_reset_status;
> + }
>
> dev = scsicmd->device->hostdata;
> if (!dev) {
> dev_err(&h->pdev->dev, "%s: device lookup failed\n", __func__);
> - return FAILED;
> + rc = FAILED;
> + goto return_reset_status;
> }
>
> - if (dev->devtype == TYPE_ENCLOSURE)
> - return SUCCESS;
> + if (dev->devtype == TYPE_ENCLOSURE) {
> + rc = SUCCESS;
> + goto return_reset_status;
> + }
>
> /* if controller locked up, we can guarantee command won't complete */
> if (lockup_detected(h)) {
> @@ -5863,7 +5879,8 @@ static int hpsa_eh_device_reset_handler(struct
> scsi_cmnd *scsicmd)
> "cmd %d RESET FAILED, lockup detected",
> hpsa_get_cmd_index(scsicmd));
> hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
> - return FAILED;
> + rc = FAILED;
> + goto return_reset_status;
> }
>
> /* this reset request might be the result of a lockup; check */
> @@ -5872,12 +5889,15 @@ static int hpsa_eh_device_reset_handler(struct
> scsi_cmnd *scsicmd)
> "cmd %d RESET FAILED, new lockup detected",
> hpsa_get_cmd_index(scsicmd));
> hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
> - return FAILED;
> + rc = FAILED;
> + goto return_reset_status;
> }
>
> /* Do not attempt on controller */
> - if (is_hba_lunid(dev->scsi3addr))
> - return SUCCESS;
> + if (is_hba_lunid(dev->scsi3addr)) {
> + rc = SUCCESS;
> + goto return_reset_status;
> + }
>
> if (is_logical_dev_addr_mode(dev->scsi3addr))
> reset_type = HPSA_DEVICE_RESET_MSG;
> @@ -5888,17 +5908,24 @@ static int hpsa_eh_device_reset_handler(struct
> scsi_cmnd *scsicmd)
> reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
> hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
>
> - h->reset_in_progress = 1;
> -
> /* send a reset to the SCSI LUN which the command was sent to */
> rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type,
> DEFAULT_REPLY_QUEUE);
> + if (rc == 0)
> + rc = SUCCESS;
> + else
> + rc = FAILED;
> +
> sprintf(msg, "reset %s %s",
> reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ",
> - rc == 0 ? "completed successfully" : "failed");
> + rc == SUCCESS ? "completed successfully" : "failed");
> hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
> +
> +return_reset_status:
> + spin_lock_irqsave(&h->reset_lock, flags);
> h->reset_in_progress = 0;
> - return rc == 0 ? SUCCESS : FAILED;
> + spin_unlock_irqrestore(&h->reset_lock, flags);
> + return rc;
> }
>
> static void swizzle_abort_tag(u8 *tag)
> @@ -8649,10 +8676,13 @@ static void hpsa_rescan_ctlr_worker(struct
> work_struct *work)
> /*
> * Do the scan after the reset
> */
> + spin_lock_irqsave(&h->reset_lock, flags);
> if (h->reset_in_progress) {
> + spin_unlock_irqrestore(&h->reset_lock, flags);
> h->drv_req_rescan = 1;
> return;
> }
> + spin_unlock_irqrestore(&h->reset_lock, flags);
>
> if (hpsa_ctlr_needs_rescan(h) || hpsa_offline_devices_ready(h)) {
> scsi_host_get(h->scsi_host);
> @@ -8759,6 +8789,7 @@ static int hpsa_init_one(struct pci_dev *pdev, const
> struct pci_device_id *ent)
> spin_lock_init(&h->lock);
> spin_lock_init(&h->offline_device_lock);
> spin_lock_init(&h->scan_lock);
> + spin_lock_init(&h->reset_lock);
> atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
> atomic_set(&h->abort_cmds_available, HPSA_CMDS_RESERVED_FOR_ABORTS);
>
> diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
> index 6f04f2a..5352664 100644
> --- a/drivers/scsi/hpsa.h
> +++ b/drivers/scsi/hpsa.h
> @@ -301,6 +301,7 @@ struct ctlr_info {
> struct mutex reset_mutex;
> u8 reset_in_progress;
> struct hpsa_sas_node *sas_host;
> + spinlock_t reset_lock;
> };
>
> struct offline_device_entry {
>
